29.160.99 有关旋转电机的其他标准 标准查询与下载

GB/T 25090-2010 电动机轻载调压节电装置

本标准规定了电动机轻载调蟑节电装置(以下简称节电装置〉的分类、耍求和试验方法。 本标准适用于额定电压不超过6 kV、额定频率50/60 Hz、额定容量不超过2 500 kW的节电装置。

Step-down power saving device for asynchronous motor at light load

GB/T 755.2-2003 旋转电机(牵引电机除外)确定损耗和效率的试验方法

本部分适用于国家标准GB 755-2000规定范围以内的所有直流电机、交流同步电机以及交流感应电机。其原理也适用于其他型式的旋转电机、如旋转变流机、交流换向器电动机以及交流单相感应电动机，这些电机通常采用其他方法确定损耗。

Methods for determining losses and efficiency of rotating electrical machinery from tests(excluding machines for traction vehicles)

24/30435247 DC ISO 29461-4 旋转机械进气过滤系统 第4部分：沿海和近海环境中静态过滤系统的测试方法

ISO 29461-4 Air intake filter systems for rotary machinery. - Part 4: Test methods for static filter systems in coastal and offshore environments

DL/T 2658-2023 快速动态响应同步调相机技术规范

本文件规定了快速动态响应同步调相机主要技术性能及其参数要求。 本文件适用于额定容量300MVA及以下快速动态响应同步调相机，其他容量等级可参照执行。

Technical specifications of fast dynamic response synchronous condenser

23/30433230 DC BS EN ISO 29461-3 用于旋转机械的空气过滤器进气系统 测试方法 第 3 部分：过滤元件的机械完整性

BS EN ISO 29461-3. Air filter intake systems for rotary machinery. Test methods - Part 3. Mechanical integrity of filter elements

ISO/CD 29461-4:2023 旋转机械进气过滤系统第4部分：沿海和近海环境中静态过滤系统的试验方法

Air intake filter systems for rotary machinery — Part 4: Test methods for static filter systems in coastal and offshore environments

ISO/DIS 29461-3 旋转机械用空气过滤器进气系统“试验方法”第3部分：过滤元件的机械完整性

Air filter intake systems for rotary machinery — Test methods — Part 3: Mechanical integrity of filter elements

T/CAMS 141-2023 空调轴流风机用电机壳体 技术规范

规定了空调轴流风机用电机壳体的技术要求，描述了对应的证实方法。

Air conditioning motor housing for axial flow fan-Technical specifications

T/CEC 681-2022 同步发电机中性点接地系统参数试验导则

本文件规定了同步发电机中性点接地系统参数试验要求、试验方法和评定标准。 本文件适用于同步发电机中性点不接地、经消弧线圈接地、经高电阻接地或经高阻抗接地的接地系参数试验。调相机和发电电动机可参照执行。

Guidelines for Parameter Test of Synchronous Generator Neutral Grounding System

BS EN ISO 29461-2:2022 用于旋转机械的进气过滤系统 测试方法-雾和薄雾环境中滤芯耐久性测试

This document specifies general test requirements, the test rig and equipment, the test materials and the test procedure and report for determining water endurance performance of air filter elements used in air intake filter systems for rotary machinery such as stationary gas turbines, compressors and other stationary internal combustion engines. The test evaluates water endurance performance of air filter elements under laboratory conditions. The performance results obtained in accordance with this document cannot be quantitatively applied (by themselves) to predict performance in service with regard to water endurance and lifetime.

Air intake filter systems for rotary machinery. Test methods - Filter element endurance test in fog and mist environments

T/JSEE 008-2022 调相机组管道振动测试与评估导则

本标准规定了特高压直流换流站调相机组管道的振动测试、振动评估与振动治理的方法。 本标准适用于特高压直流换流站调相机组管道系统的稳态振动、瞬态振动的测试、评估和治理。

Guidelines for Vibration Testing and Evaluation of Tubing Units for Condenser Units

EN ISO 29461-2:2022 旋转机械的进气过滤器系统.试验方法.第2部分:在雾和雾环境中的滤芯耐久性试验

This document specifies general test requirements, the test rig and equipment, the test materials and the test procedure and report for determining water endurance performance of air filter elements used in air intake filter systems for rotary machinery such as stationary gas turbines, compressors and other stationary internal combustion engines. The test evaluates water endurance performance of air filter elements under laboratory conditions. The performance results obtained in accordance with this document cannot be quantitatively applied (by themselves) to predict performance in service with regard to water endurance and lifetime.

Air intake filter systems for rotary machinery - Test methods - Part 2: Filter element endurance test in fog and mist environments (ISO 29461-2:2022)

ISO 29461-2:2022 旋转机械的进气过滤器系统.试验方法.第2部分:在雾和雾环境中的滤芯耐久性试验

This document specifies general test requirements, the test rig and equipment, the test materials and the test procedure and report for determining water endurance performance of air filter elements used in air intake filter systems for rotary machinery such as stationary gas turbines, compressors and other stationary internal combustion engines. The test evaluates water endurance performance of air filter elements under laboratory conditions. The performance results obtained in accordance with this document cannot be quantitatively applied (by themselves) to predict performance in service with regard to water endurance and lifetime.

Air intake filter systems for rotary machinery — Test methods — Part 2: Filter element endurance test in fog and mist environments

T/CEEIA 574-2022 电动机在线运行智能监测系统（IMS）

本文件规定了电动机在线运行智能监测系统(IMS) (以下简称“监测系统”)的监测系统构成，智能传感器型式，技术要求，试验方法，检验规则以及标识、包装及存贮等要求。 本文件适用于电动机在线运行智能监测系统(IMS)设计、制造、检测和使用，其他设备亦可参照使用。

Intelligent monitoring system for motor on-line operation (IMS)

T/CEEIA 575-2022 中小型电机用水性浸渍漆工艺规范及质量要求

本文件规定了用于中小型电机绝缘处理的水性浸渍漆的技术要求、工艺规范、绝缘结构质量要求及试验方法。 本文件适用于机座号160及以下的中小型电机绝缘浸渍处理。

Process specification and quality requirements of water-based impregnating varnishes for small and medium-sized motors

T/CAMS 84-2021 暖通空调轴流风机用电机 安装尺寸

本文件规定了术语和定义、电机轴伸尺寸、电机安装尺寸、未注尺寸公差。

Motors for HVAC axial fan -Installation dimentions

BS EN ISO 29461-1:2021 旋转机械的进气过滤系统 试验方法 静态过滤器元件

Air intake filter systems for rotary machinery. Test methods. Static filter elements

DS/EN ISO 29461-1:2021 旋转机械进气过滤系统《试验方法》第1部分：静态过滤元件（ISO 29461-1:2021）

Air intake filter systems for rotary machinery – Test methods – Part 1: Static filter elements (ISO 29461-1:2021)

DS/ISO 29461-1:2021 旋转机械进气过滤系统《试验方法》第1部分：静态过滤元件

Air intake filter systems for rotary machinery – Test methods – Part 1: Static filter elements

EN ISO 29461-1:2021 旋转机械的进气过滤系统.试验方法.第1部分:静态过滤器元件

Air intake filter systems for rotary machinery - Test methods - Part 1: Static filter elements (ISO 29461-1:2021)