共找到 19 条与 相关的标准,共 2 页
Generic Telecommunications Grounding (Earthing) and Bonding for Customer Premises - Addendum 1: External Grounding
Generic Telecommunications Bonding and Grounding (Earthing) for Customer Premises - Addendum 2: Structural Metal
Telecommunications - Pathways and Spaces: Addendum 1: Revised Temperature and Humidity Requirements for Telecommunications Spaces
This Standard specifies administration systems for telecommunications infrastructure within buildings(including commercial,industrial,residential,and data center premises)and between buildings.This infrastructure may range in size from a building requiring a single telecommunications space(TS)and associated elements,to many TSs and associated elements in multiple campus locations.This Standard applies to administration of telecommunications infrastructure in existing,renovated,and new buildings.
Administration Standard for Telecommunications Infrastructure
This default ballot is a result of the comment resolution held regarding SP-3-4817-RV3-F and is limited to 5 specific technical changes. Other comments submitted to SP-3-4817-RV3-F were resolved editorially. The results of the SP-3-4817-RV3-F ballot consisted of 15 'abstain', 16 'approve' votes, 4 'approve with comments' votes, and 2 with disapprove with comments votes.
Telecommunications Pathways and Spaces
This default ballot is a result of the comment resolution held regarding SP-3-4351-RV2-1 and is limited to Three (3) specific technical changes. Other comments submitted to SP-3-4351-RV2-1 were resolved editorially. The results of the SP-3-4351-RV2-1 ballot consisted of 14 'abstain', 23 'approve' votes,0 'approve with comments' votes, and 3 with disapprove with comments.
Generic Telecommunications Grounding (Earthing) and Bonding for Customer Premises
Commercial Building Telecommunications Cabling Standard - Part 2: - Balanced Twisted-Pair Cabling Components - Addendum 9 - Additional Category 6 Balance Requirements and Mesurement Procedures
This standard specifies the requirements for the cable diameter of 4-pair balanced UTP and SCTP cables specified in TIA-568-B.2.
Commercial Building Telecommunications Cabling Standard - Part2: Balanced Twisted-Pair Cabling Components - Addendum 11: Specification for Increased Diameter of 4-Pair UTP and ScTP Cables
This addendum contains refinements and enhancements to the measurement methods specified for category 6 components in the TIA/EIA-568-B.2-1 Standard
Commercial Building Telecommunicatins Cabling Standard - Part 2: Balanced Twisted-Pair Cabling Components - Addendum 6 - Category 6 Related Component Test Procedures
This addendum makes corrections to TIA/EIA-568-B.2
Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Cabling Components - Addendum 5
Specifies requirements for insertion loss, near-end crosstalk (NEXT) loss, equal level far-end crosstalk (ELFEXT), return loss, propagation delay, and delay skew requirements for 100 ohm 4-pair category 6 cabling, cables, and connecting hardweare. (SP-3-3727-AD1-B)
Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Components - Addendum 1 - Transmission Performance Specifications for 4-Pair 100 Ohm Category 6 Cabling
(SP-3-4351) Specifies the requirements for a uniform telecommunications grounding and bonding infrastructure that shall be followed within commercial buildings where telecommunications equipment will be installed.
Commercial Building Grounding and Bonding Requirements for Telecommunications
The purpose of this addendum is to add clause 1.2.5 to TIA/EIA-568-B.2. which covers insertion loss and return loss pass/fail determination.
Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling - Addendum 3 - Additional Considerations for Insertion Loss and Return Loss Pass/Fail Determination
(SP-3-4426-AD4) This standard specifies solderless connection reliability requirements for copper connecting hardware used in commercial building telecommunications.
Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Cabling Components - Addendum 4 - Solderless Connection Reliability Requirements for Copper Connecting Hardware
Specifies a generic telecommunications cabling system for commercial buildings that will support a multiproduct, multivendor environment. This standard was listed for public review in the 2/11/2000 issue of Standards Action. It is being resubmitted due to substantive changes to the text.
Commercial Building Telecommunications Cabling Standard
Specifies minimum requirements for balanced twisted-pair telecommunications cabling components. This standard was listed for public review in the 11/3/2000 issue of Standards Action. It is being resubmitted due to substantive changes to the text.
Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling
Revises subclauses 4.3.48, 4.4, 4.4.1, 4.4.4.9, and 5.4.3 of the standard.
Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling
Applies to minimum 4-pair unshielded twisted-pair (UTP) and 4-pair screened twisted-pair (ScTP) patch cable bend radius
Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 1 - Minimum 4-Pair UTP and 4-Pair ScTP Patch Cable Bend Radius
Provides requirements for telecommunications ELV d.c. power supplies in restricted access locations of premises that are used by licensed public telecommunications carriers in the provision of public telecommunications networks. It also provides the esse
Electrical installations - Extra-low voltage d.c. power supplies and service earthing within public telecommunications networks
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号