33.100.01;33.100.20 标准查询与下载
共找到 17 条与 相关的标准，共 2 页
This part of IEC 61000 gives information and guidance on the EMC basic standards and other basic EMC documents published in the IEC 61000-4 series. Those basic standards describe mainly immunity tests to be considered and applied for electric and electronic equipment, including systems. The object of this part of IEC 61000 is to give assistance to the technical committees of IEC or other bodies, users and manufacturers in considering the immunity test methods applicable to their products; determining the immunity test methods relevant for the electromagnetic environment in which their products are intended to be used; specifying the ports of their products being subjected to the relevant immunity test methods.
Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of the IEC 61000-4 series
- ICS
- 33.100.01;33.100.20
- CCS
- L06
- 发布
- 2016-04
- 实施
이 표준은 전기와 전자 제품(기기 및 시스템)의 전기 자기 환경 내에서의 시험 및 측정 기
Electromagnetic compatibility(EMC)－Part 4-1：Testing and measurement techniques－Overview of IEC 61000－4 series
- ICS
- 33.100.01;33.100.20
- CCS
- L06
- 发布
- 2012-05-30
- 实施
- 2012-05-30
Interpretation Sheet 1 - Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
- ICS
- 33.100.01;33.100.20
- CCS
- L06
- 发布
- 2010-08
- 实施
Electromagnetic compatibility of technical equipment. Specification for radio disturbance and immunity measuring apparatus and methods. Part 2-3. Methods of measurement of radio disturbances and immunity. Radiated radio disturbance measurements
- ICS
- 33.100.01;33.100.20
- CCS
- 发布
- 2010
- 实施
- 2010-01-01
Electromagnetic compatibility of technical equipment. Specification for radio disturbance and immunity measuring apparatus and methods. Part 2-2. Methods of measurement of radio disturbances and immunity. Measurement of radio disturbance power
- ICS
- 33.100.01;33.100.20
- CCS
- 发布
- 2009
- 实施
- 2010-01-01
This Standard applies to apparatus intended to be connected to a power network supplied from a high or medium voltage transformer dedicated to the supply of an installation feeding manufacturing or similar plant, and intended to operate in or in proximit
Electromagnetic compatibility (EMC) - Generic standards - Emission standard for industrial environments
- ICS
- 33.100.01;33.100.20
- CCS
- L06
- 发布
- 2007-05-31
- 实施
This standard is about Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides; Amendment 1
Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides; Amendment 1
- ICS
- 33.100.01;33.100.20
- CCS
- L06
- 发布
- 2006-11
- 实施
This part of IEC 61000 is a basic EMC (electromagnetic compatibility) publication. It considers immunity tests for electric and/or electronic equipment (apparatus and system) in its electromagnetic environment. Only conducted phenomena are considered, including immunity tests for equipment connected to public and industrial networks. The object of this standard is to establish a reference for evaluating the immunity of electrical and electronic equipment when subjected to unbalanced power supply voltage. This standard applies to 50 Hz/60 Hz three-phase powered electrical and/or electronic equipment with rated line current up to 16 A per phase. This standard does not apply to equipment with three-phase plus neutral connection if that equipment operates as a group of single-phase loads connected between phase and neutral. This standard does not apply to electrical and/or electronic equipment connected to a.c. 400 Hz distribution networks. This standard does not include tests for the zero-sequence unbalance factor. The immunity test levels required for a specific electromagnetic environment together with performance criteria are indicated in the product, product family or generic standards as applicable. This immunity test should be included in product, product family or generic standards when equipment is likely to show reduced performance or function when exposed to a supply voltage with voltage unbalance. The verification of the reliability of electrical components (capacitors, motors, etc.) and longterm effects (greater than a few minutes) is not considered in this standard.
Electromagnetic compatibility (EMC) - Testing and measurement techniques - Unbalance, immunity test
- ICS
- 33.100.01;33.100.20
- CCS
- L06
- 发布
- 2006-08-25
- 实施
Electromagnetic compatibility (EMC) - Generic standards - Immunity for residential, commercial and light-industrial environments
- ICS
- 33.100.01;33.100.20
- CCS
- L06
- 发布
- 2006-06-01
- 实施
This part of IEC 61000-4 relates to the immunity of electrical and electronic equipment to repetitive electrical fast transients. It gives immunity requirements and test procedures related to electrical fast transients/bursts. It additionally defines ranges of test levels and establishes test procedures. The object of this standard is to establish a common and reproducible reference for evaluating the immunity of electrical and electronic equipment when subjected to electrical fast transient/bursts on supply, signal, control and earth ports. The test method documented in this part of IEC 61000-4 describes a consistent method to assess the immunity of an equipment or system against a defined phenomenon. NOTE As described in IEC Guide 107, this is a basic EMC publication for use by product committees of the IEC. As also stated in Guide 107, the IEC product committees are responsible for determining whether this immunity test standard should be applied or not, and if applied, they are responsible for determining the appropriate test levels and performance criteria. TC 77 and its sub-committees are prepared to co-operate with product committees in the evaluation of the value of particular immunity tests for their products. The standard defines: – test voltage waveform; – range of test levels; – test equipment; – verification procedures of test equipment; – test set-up; – test procedure. The standard gives specifications for laboratory and post-installation tests.
Electromagnetic compatibility (EMC) - Testing and measurement techniques - Electrical fast transient/burst immunity test
- ICS
- 33.100.01;33.100.20
- CCS
- L06
- 发布
- 2006-06-01
- 实施
Настоящий стандарт распространяется на профессиональную аналоговую и цифровую аудио-, видео-, аудиовизуальную аппаратуру и аппаратуру уп
Electromagnetic compatibility of technical equipment. Immunity to electromagnetic disturbance of audio, video, audio-visiual and entertainment lighting control apparatus for professional use. Requirement and test methods
- ICS
- 33.100.01;33.100.20
- CCS
- 发布
- 1999
- 实施
- 2001-07-01
Настоящий стандарт распространяется на радиовещательные приемники, телевизоры и функционально связанное с ними оборудование, включая бы
Electromagnetic compatibility of technical equipment. Immunity of sound and television broadcast receivers and associated equipment to electromagnetic disturbances. Requirements and test methods
- ICS
- 33.100.01;33.100.20
- CCS
- 发布
- 1999
- 实施
- 2001-07-01
Настоящий стандарт распространяется на оборудование распределительных сетей приемных систем телевидения и радиовещания. Стандарт не ра
Electromagnetic compatibility of technical equipment. Distribution networks of television and sound receiving systems. Limits of electromagnetic disturbances, immunity requirements and test methods
- ICS
- 33.100.01;33.100.20
- CCS
- 发布
- 1999
- 实施
- 2001-07-01
This Standard applies to apparatus intended to be connected to a power network supplied from a high or medium voltage transformer dedicated to the supply of an installation feeding manufacturing or similar plant, and intended to operate in or in proximit
Electromagnetic compatibility (EMC) - Generic standards - Emission standard for residential, commercial and light-industrial environments
- ICS
- 33.100.01;33.100.20
- CCS
- 发布
- 实施
Electromagnetic compatibility (EMC) - Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
- ICS
- 33.100.01;33.100.20
- CCS
- 发布
- 实施
Electromagnetic compatibility (EMC) - Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
- ICS
- 33.100.01;33.100.20
- CCS
- 发布
- 实施
Electromagnetic compatibility (EMC) - Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
- ICS
- 33.100.01;33.100.20
- CCS
- 发布
- 实施
