共找到 109 条与 光纤通信 相关的标准,共 8 页
GB/T28514.3 的本部分规定了对基于IPv6 的中间系统-中间系统路由协议(IS-ISv6)的技术要求,包括对IPv6 可达性TLV、IPv6 接口地址TLVIPv6 NLPID操作安全等方面的规定。 本部分适用于支持IS-ISv6 的网络设备。
IPv6 routing protocol.Part 3:Intermediate system to intermediate system intra-domain routing information exchange protocol(IS-ISv6)
本标准规定了对光传送网(OTN)体系设备的功能块特性要求。 本标准适用于光传送网(OTN)体系设备,可以选择本标准中功能块的不同子集,根据本标准给出的组合规则,以不同方式组合,提供不同的设备功能。
Characteristics of optical transport network hierarchy equipment functional blocks
本标准规定了与光纤通信有关的术语及其定义。主要包括一般概念、光纤结构和光学特性、传播特性、光缆、连接器和耦合器、光源和光检测器、测量技术与系统等方面的术语。 本标准适用于光通信技术领域。
Terminology for Optical communication
本标准规定了光纤机械式固定接头(以下简称“光纤接头”)在几种使用条件下插入损耗的测试方法。 所规定的光纤接头被设计用于单信道和多信道,或混合信道,或者两者兼有的网络结构。根据这种测试,对光纤接头插入损耗进行计算。可用于质量评定。 本标准适用于光纤机械式固定接头插入损耗的测试。
Optical fiber mechanical-type splice insertion loss test
本标准规定了长途光缆数字通信系统进入公用电信网的要求。本标准包括长途光缆通信系统的组成和主要特性,光缆数字线路系统的组成和主要传输特性,对机线设备的要求,对系统的可靠性要求以及维护使用的要求等。 本标准适用于公用电信网长途干线光缆通信系统。系统的传输性能应适应电话、电报、数据、传真、彩色电视及其他通信业务等多种信息传输的需要。专用电信网的长途干线光缆通信系统亦可参照使用本标准。
Requirements for long haul optical fiber cable systems joined to national public telecommunication network
本标准规定了通信用多模光纤的分类、几何尺寸参数系列、光学和传输特性参数系列、机械特性参数系列。 本标准适用于通信网及其他通信设备中使用的多模光纤。
The series of multimode optical fibres for telecommunication
本标准规定了摄象管、象增强管、变象管、阴极射线管等光电器件用光学纤维面板(简称光纤板)的有关术语及测试方法。 本标准适用于摄象管、象增强管、变象管、阴极射线管等光电器件中使用的光纤板。
Methods of measurement of fibre-optic plates
本文件适用于对宽带接入服务运营商提供给家庭固定宽带用户的接入速率进行测试,也适用于对非宽带接入服务运营商为用户提供固定宽带接入速率测试服务时的接入速率进行测试。 本文件不适用于企业专线接入以及跨运营商接入的情况。
Broadband rate test method for fixed broadband access
Access equipment supports VxLAN technical requirements
Quantum Key Distribution (QKD) System Technical Requirements Part 1: QKD System Based on Decoy State BB84 Protocol
Fiber Optic Sensors—Fiber Bragg Grating Interrogator Standard—Terminology and Definitions
PIN-FET optical receiving component testing method
本标准规定了义务教育学校音乐教学器材的要求、质量检验及评定、标志、合格证、使用说明书、包装、运输和贮存。 本标准适用于义务教育学校音乐教学器材。
Technical specifications for music teaching equipment in compulsory education schools
This technical report describes the round robin measurement results for the group delay ripple (GDR) of tunable dispersion compensators (TDCs). It briefly explains the four typical TDCs measured and four typical methods of measuring group delay (GD), as well as the GDR round robin measurement results of TDCs, and an analysis of repeatability and differences among these measurement methods. This technical report also proposes suitable measurement parameters and a new parameter of phase ripple instead of GDR
Dynamic modules - Part 6-3: Round robin measurement results for group delay ripple of tunable dispersion compensators
Technical specifications for prefabricated optical cables in smart substations
Optical fiber composite overhead phase line and related accessories
Specifications for construction, acceptance and operation of optical fiber composite overhead phase line
Fibre optic active components and devices - Reliability standards - Part 3: Laser modules used for telecommunication
This part of IEC 62572 deals with reliability assessment of laser modules used for telecommunication. The aim of this standard is ?C to establish a standard method of assessing the reliability of laser modules in order to minimize risks and to promote product development and reliability; ?C to establish means by which the distribution of failures with time can be determined. This should enable the determination of equipment failure rates for specified end of life criteria. In addition@ guidance is given in IEC TR 62572-2.
Fibre optic active components and devices - Reliability standards - Part 3: Laser modules used for telecommunication
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号