35.220.23 盒式磁带和磁带盒 标准查询与下载
共找到 367 条与 盒式磁带和磁带盒 相关的标准，共 25 页
Specifies the physical and magnetic characteristics to enable interchangeability of the cartridges, the quality of the recorded signals, the format and the recording method, thus allowing, together with ISO 1001, full data interchange, extensions to the transformation of data before it is formatted as in ISO 9661. Cartridge and recording method being identical with those described in ISO 9661. The permissible routes for the flow of data are shown in annex H.
Information technology — Data interchange on 12,7 mm wide 18-track magnetic tape cartridges — Extended format
- ICS
- 35.220.23
- CCS
- 发布
- 2021-07-01
- 实施
La présente Norme internationale spécifie les caractéristiques physiques et magnétiques d'une cartouche à bande magnétique de 3,81 mm de large, dans le but de permettre l'interchangeabilité de telles cartouches. Elle spécifie également la qualité des signaux enregistrés, le format enregistré et la méthode d'enregistrement, permettant ainsi l'échange de données entre lecteurs-enregistreurs au moyen de telles cartouches à bande magnétique. Le format utilisé est connu sous l'appellation : DATA/DAT-DC. La présente Norme internationale spécifie deux types de cartouche. Pour les besoins de la norme, ces cartouches sont référencées comme type A et type B. Pour le type A, la bande magnétique présente une épaisseur nominale de 13 µm et une longueur nominale de 60,5 m. Pour le type B, la bande magnétique présente une épaisseur nominale de 9 µm et une longueur nominale de 92,0 m. L'échange d'information entre systèmes au moyen de la présente Norme internationale exige aussi l'utilisation, au minimum, d'une structure de volumes et de fichiers et d'un code d'échange qui doivent être acceptés par les parties concernées dans l'échange. Il n'est pas du domaine d'application de la présente Norme internationale de spécifier la structure de volumes et de fichiers, ou le code d'échange.
Information technology — 3,81 mm wide magnetic tape cartridge for information interchange — Helical scan recording — DATA/DAT-DC format using 60 m and 90 m length tapes
- ICS
- 35.220.23
- CCS
- 发布
- 2021-07-01
- 实施
This International Standard specifies the physical and magnetic characteristics of an 8 mm wide magnetic tape cartridge to enable physical interchange of such cartridges between drives. It also specifies the quality of the recorded signals, the recording method and the recorded format called VXA-1, and thereby allowing data interchange between drives by means of such magnetic tape cartridges. This International Standard specifies three types depending on the length of magnetic tape contained in the case, referred to as Type A, Type B and Type C. Information interchange between systems also requires, at a minimum, agreement between the interchange parties upon the interchange code(s) and the specifications of the structure and labelling of the information on the interchanged cartridge. If compression is used with this format, it shall be according to International Standard ISO/IEC 15200.
Information technology — 8 mm wide magnetic tape cartridge for information interchange — Helical scan recording — VXA-1 format
- ICS
- 35.220.23
- CCS
- 发布
- 2021-07-01
- 实施
Specifies the physical and magnetic characteristics. Also specifies the quality of the recorded signals, the recorded format and the recording method, thereby allowing data interchange between drives by means of such magnetic tape cartridges. Specifies two types of cartridges referred to as type A (magnetic tape of nominal thickness of 13 µm and a nominal length of up to 60,5 m) and type B (magnetic tape of a nominal thickness of 9 µm and a nominal length of up to 92,0 m).
Information technology — 3,81 mm wide magnetic tape cartridge for information interchange — Helical scan recording — DDS format using 60 m and 90 m length tapes
- ICS
- 35.220.23
- CCS
- 发布
- 2021-07-01
- 实施
Specifies the physical and magnetic characteristics and also the quality of the recorded signal, the recording method and the recorded format (Digital Data Storage - Data Compression, DDS-DC), thereby allowing data interchange between drives by means of such magnetic tape cartridges.
Information technology — 3,81 mm wide magnetic tape cartridge for information interchange — Helical scan recording — DDS-DC format using 60 m and 90 m length tapes
- ICS
- 35.220.23
- CCS
- 发布
- 2021-07-01
- 实施
Information technology — Data interchange on 12.7 mm, 384-track magnetic tape cartridge — Ultrium-1 format
- ICS
- 35.220.23
- CCS
- 发布
- 20200903
- 实施
- 20200903
Information technology — Data interchange on 12.7 mm, 208-track magnetic tape cartridges — DLT 5 format
- ICS
- 35.220.23
- CCS
- 发布
- 20200903
- 实施
- 20200903
Information technology — 8 mm wide magnetic tape cartridge for information interchange — Helical scan recording — VXA-1 format
- ICS
- 35.220.23
- CCS
- 发布
- 20200903
- 实施
- 20200903
Information technology — 8 mm wide magnetic tape cartridge for information interchange — Helical scan recording AIT-1 with MIC format
- ICS
- 35.220.23
- CCS
- 发布
- 20200903
- 实施
- 20200903
Information technology — 12.65 mm wide magnetic tape cassette for information interchange — Helical scan recording — DTF-2
- ICS
- 35.220.23
- CCS
- 发布
- 20200903
- 实施
- 20200903
Information technology — Data interchange on 12.7 mm, 128-track magnetic tape cartridges — DLT 3-XT format
- ICS
- 35.220.23
- CCS
- 发布
- 20200903
- 实施
- 20200903
Information processing — Data interchange on 6.30 mm(0.25 in) wide magnetic tape cartridge using IMFM recording at 252 ftpmm(6 400 ftpi) — Part 2: Track format and method of recording for data interchange in start/stop mode
- ICS
- 35.220.23
- CCS
- 发布
- 20200903
- 实施
- 20200903
Information technology — Data interchange on 12.7 mm, 208-track magnetic tape cartridges — DLT 6 format
- ICS
- 35.220.23
- CCS
- 发布
- 20200903
- 实施
- 20200903
Information technology — 8 mm wide magnetic tape cartridge for information interchange — Helical scan recording AIT-2 with MIC format
- ICS
- 35.220.23
- CCS
- 发布
- 20200903
- 实施
- 20200903
This International Standard specifies the physical and magnetic characteristics of an 8 mm wide magnetic tape cartridge to enable interchangeability of such cartridges. It also provides a format and recording method, thus allowing, together with ISO 1001 for Magnetic Tape Labelling, full data interchange by means of such magnetic tape cartridges.
Information technology -- 8 mm wide magnetic tape cartridge for information interchange -- Helical scan recording
- ICS
- 35.220.23
- CCS
- 发布
- 2017-10-03
- 实施
This International Standard specifies the physical and magnetic characteristics of a 8 mm wide magnetic tape cartridge to enable physical interchange of such cartridges between drives. It also specifies the quality of the recorded signals, the recording method and the recorded format, thereby allowing data interchange between drives by means of such magnetic tape cartridges. Information interchange between systems also requires, at a minimum, agreement between the interchange parties upon the interchange code(s) and the specifications of the structure and labelling of the information on the interchanged cartridge.
Information technology -- Data interchange on 8 mm wide magnetic tape cartridge -- Helical scan recording -- DA-2 format
- ICS
- 35.220.23
- CCS
- 发布
- 2017-10-03
- 实施
This International Standard specifies the physical and magnetic characteristics of a magnetic tape cartridge, using a magnetic tape 12,7 mm wide, so as to provide physical interchange of such cartridges between drives. It also specifies the quality of the recorded signals, the recording method and the recorded format known as Parallel Serpentine, thereby allowing data interchange between drives by means of such cartridges. The format supports variable length Logical Records, high speed search, and the use of the algorithm for data compression specified in International Standard ISO/IEC 15200. Information interchange between systems also requires, at a minimum, agreement between the interchange parties upon the interchange code(s) and the specification of the structure and labelling of the information on the interchanged cartridge. Together with a standard for volume and file structure, e.g. International Standard ISO 1001, this International Standard provides for full data interchange between data processing systems.
Information technology -- 12,7 mm 128-track magnetic tape cartridge for information interchange -- Parallel serpentine format
- ICS
- 35.220.23
- CCS
- 发布
- 2017-10-03
- 实施
This International Standard specifies the physical and magnetic characteristics of a 3,81 mm wide magnetic tape cartridge to enable physical interchangeability of such cartridges between drives. It also specifies the quality of the recorded signals, the recording method and the recorded format — called Digital Data Storage (DDS) — thereby allowing data interchange between drives by means of such magnetic tape cartridges. Information interchange between systems also requires, at a minimum, agreement between the interchange parties upon the interchange code(s) and the specifications of the structure and labelling of the information on the interchanged cartridge. Under information interchange circumstances in which a processing algorithm, e.g. for lossless data compression as specified in ISO/IEC 11558, is applied to the host data prior to recording on the tape and a complementary reprocessing algorithm is applied after the data is read from the tape, agreement upon these by the interchange parties is also required.
Information technology -- 3,81 mm wide magnetic tape cartridge for information interchange -- Helical scan recording -- DDS-3 format using 125 m length tapes
- ICS
- 35.220.23
- CCS
- 发布
- 2017-10-03
- 实施
This International Standard specifies the physical and magnetic characteristics of an 8 mm wide magnetic tape cartridge containing a memory chip to enable physical interchange of such cartridges between drives. It also specifies the quality of the recorded signals, the recording method and the recorded format - called Advanced Intelligent Tape No.2 with Memory In Cartridge (AIT-2 with MIC) - thereby allowing data interchange between drives by means of such magnetic tape cartridges. The System Log are recorded in the MIC. This International Standard specifies two types of cartridge depending on the thickness of the magnetic tape contained in the case. Information interchange between systems also requires, at a minimum, agreement between the interchange parties upon the interchange code(s) and the specifications of the structure and labelling of the information on the interchanged cartridge.
Information technology -- 8 mm wide magnetic tape cartridge for information interchange -- Helical scan recording AIT-2 with MIC format
- ICS
- 35.220.23
- CCS
- 发布
- 2017-10-03
- 实施
This International Standard specifies the physical and magnetic characteristics of an 8 mm wide magnetic tape cartridge containing a memory chip to enable physical interchange of such cartridges between drives. It also specifies the quality of the recorded signals, the recording method and the recorded format - called Advanced Intelligent Tape No. 1 with Memory In Cartridge (AIT-1 with MIC) - thereby allowing data interchange between drives by means of such magnetic tape cartridges. The System Log is recorded in the MIC. This International Standard specifies two types of cartridge depending on the thickness of the magnetic tape contained in the case. Information interchange between systems also requires, at a minimum, agreement between the interchange parties upon the interchange code(s) and the specifications of the structure and labelling of the information on the interchanged cartridge.
Information technology -- 8 mm wide magnetic tape cartridge for information interchange -- Helical scan recording AIT-1 with MIC format
- ICS
- 35.220.23
- CCS
- 发布
- 2017-10-03
- 实施
