45.040 铁路工程材料和零件 标准查询与下载

GB/T 37439-2019 高速铁路预制后张法预应力混凝土简支梁

本标准规定了高速铁路预制后张法预应力混凝土简支梁的技术要求、检验方法.检验规则、标志与制造技术证明书、储存及运输。 2

Precast post-tensioned prestressed concrete simply-supported beam of high-speed railway

GB/T 17955-2000 球型支座技术条件

本标准规定了球型支座的产品规格、分类与命名、技术要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于支座承载力1 500～30 000kN的桥梁及其他工程结构所用的球型支座。

Technical requirements for spherical bearings

GB/T 14046-1993 铁路信号灯泡

本标准规定了铁路信号灯泡的型号、结构尺寸、基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于铁路透镜式色灯信号机用的铁路信号白炽灯泡（以下简称灯泡）。

Lamps for railway signal

GB/T 1246-1976 铁路道岔号数系列

本标准适用于铁路干线、支线、工业企业、矿山、森林和地方铁路的道岔。

Railway turn out number series

24/30486649 DC BS EN 16839:2022/A1 铁路应用 机车车辆 车头布局

BS EN 16839:2022/A1 Railway applications - Rolling stock - Head stock layout

BS EN 13749:2021+A1:2023 铁路应用 轮组和转向架 转向架构架结构要求的规定方法

Railway applications. Wheelsets and bogies. Method of specifying the structural requirements of bogie frames

T/QGCML 1585-2023 LLDPE防水板

本文件规定了 LLDPE 防水板的标记、技术要求、试验方法、检验规则、包装、合格证、运输与贮存。 本文件适用于 LLDPE 防水板的生产、检验、采购活动。

LLDPE waterproof board

T/CASMES 173-2023 桥墩防公路车辆撞击装置

本文件规定了桥墩防公路车撞击装置（下文简称“装置”）的术语和定义、产品分类、结构型式、技术要求、试验方法、检验规则、标志、包装、运输和贮存。

Bridge pier safety facilities for road vehicle impact

T/CASMES 168-2023 跨航道桥梁墩台柔性防船舶撞击装置

本文件规定了跨航道桥梁墩台柔性防船舶撞击装置的术语和定义、产品分类、规格及型号、结构形式、技术要求、试验方法、检验规则、标志、包装、运输和贮存。

Flexible collision prevention device for channel crossing bridge piers and abutments

T/CASME 587-2023 高速铁路支柱腕臂预配平台系统

本文件规定了高速铁路支柱腕臂预配平台系统的术语和定义、产品结构、基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。

High speed railway pillar cantilever pre assembly platform system

ASTM A551/A551M-08(2023) 铁路和快速交通用碳钢轮胎标准规范

1.1 This specification covers seven classes of carbon steel tires for railway and rapid transit use. 1.1.1 Class A—For untreated driving tires for locomotives in passenger service. 1.1.2 Class AHT—For heat-treated driving tires for locomotives in passenger service. 1.1.3 Class B—For untreated driving tires for freight locomotives and tires for locomotive-truck, tender-truck, trailer and car wheels, and miscellaneous service. 1.1.4 Class BHT—For heat-treated driving tires for freight locomotives and tires for trailer wheels. 1.1.5 Class C—For untreated tires for switching locomotives. 1.1.6 Class CHT—For heat-treated driving tires and switching locomotives and tires for locomotive-trucks, tender-trucks, trailer and car wheels, and miscellaneous service. 1.1.7 Class DHT—For heat-treated driving tires for locomotives with light braking conditions, heavily loaded trailer tires, and rapid transit wheels where off-tread brakes are employed. 1.2 Supplementary requirements, including those in the general requirements of Specification A788/A788M, are provided for use when additional testing or inspection is desired. These shall apply only when specified individually by the purchaser in the order. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text and tables the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.4 Unless the order specifies the applicable “M” specification designation, the tires shall be furnished to the inch-pound units. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications

23/30466784 DC BS EN 13262 铁路应用 轮组和转向架 轮子 产品要求

BS EN 13262. Railway applications. Wheelsets and bogies. Wheels. Product requirements

TB/T 3360.1-2023 铁路隧道防排水材料 第1部分：防水板和排水板

Waterproofing and drainage materials for railway tunnels Part 1: Waterproofing and drainage boards

TB/T 3360.2-2023 铁路隧道防排水材料 第2部分：止水带

Railway tunnel waterproofing and drainage materials Part 2: Waterstops

23/30466781 DC BS EN 13261 铁路应用 轮组和转向架 车轴 产品要求

BS EN 13261. Railway applications. Wheelsets and bogies. Axles. Product requirements

23/30450064 DC BS EN 13260 铁路应用 轮组和转向架 轮组 产品要求

BS EN 13260. Railway applications. Wheelsets and bogies. Wheelsets. Product requirement

BS 5892-1:2023 铁路机车车辆材料 第 1 部分：牵引车轴规范

1   Scope This part of BS 5892 specifies requirements for the manufacture, inspection and testing of forged and/or rolled axles (solid or hollow) in the unmachined , part machined or ready for assembly condition for traction and trailing stock. This part of BS 5892 includes requirements for the dimensions, tolerances and surface finish that are to be adopted unless otherwise specified in the design drawing. This part of BS 5892 is not applicable to axles designed to BS EN 13103 and BS EN 13104, the manufacture, inspection and testing of which are specified in BS EN 13261.

Railway rolling stock materials - Part 1: Specification for axles for traction and trailing stock

BS 5892-3:2023 铁路机车车辆材料 牵引和牵引车用整体车轮规范

1   Scope This part of BS 5892 specifies requirements for the manufacture, inspection and testing of rolled or forged monobloc wheels in the unmachined , finish machined or ready for assembly condition for traction and trailing stock. This Part of BS 5892 includes requirements for the dimensions, tolerances and surface finish that are to be adopted unless otherwise specified in the design drawing. BS 5892‑3 is not applicable to wheels to be fitted to axles designed to BS EN 13103 and BS EN 13104, the manufacture, inspection and testing of which are specified in BS EN 13261.

Railway rolling stock materials. Specification for monobloc wheels for traction and trailing stock

T/SDRTS 003-2022 城市轨道交通预埋槽道技术规程

本文件规定了城市轨道交通预埋槽道及其应用的总则、规范性引用文件、术语和定义、基本要求、产品加工制作要求、产品性能与检验、施工及质量验收要求等。 本文件适用于城市轨道交通工程。

Technical specification of embedded channel for urban transit

BS EN 16839:2022 铁路应用 机车车辆 机头座布局

1   Scope This document is applicable to vehicles equipped with buffers and screw coupling systems. In order to allow operation and coupling of trainsets or vehicles, this document specifies the defined free space for the shunter called the “ Berne rectangle ” and the necessary free space for the installation of the rescue coupler. This document specifies the location, fixing, and free spaces on the headstock of: — buffers; — screw coupling systems; — end cocks; — pneumatic half couplings; — connections for electric cables. It also specifies the calculation of the width of the buffer heads. Unless otherwise displayed, all dimensions given in this document are nominal values.

Railway applications. Rolling stock. Head stock layout