45.060;45.060.01 标准查询与下载



共找到 6 条与 相关的标准,共 1

Electronic railway equipment. On-board multimedia and telematics subsystems for railways. General architecture

ICS
45.060;45.060.01
CCS
S30
发布
2016-11-30
实施
2016-11-30

Rolling stock -- DC supplied electronic ballasts for lighting fluorescent lamps

ICS
45.060;45.060.01
CCS
S30
发布
2015-10-20
实施

Rolling stock -- General requirements of carbody structures for passenger car (Amendment 1)

ICS
45.060;45.060.01
CCS
S30
发布
2011-09-07
实施

This International Standard applies to all electronic equipment for control, regulation, protection, supply, etc. installed on rail vehicles and associated with – either the accumulator battery of the vehicle; – or a low-voltage power supply source with or without a direct connection to the contact system (transformer, potentiometer device, auxiliary supply) with the exception of electronic power circuits, which conform to IEC 61287-1. This standard covers the conditions of operation, design, construction, and testing of electronic equipment, as well as basic hardware and software requirements considered necessary for competent, reliable equipment. Additional requirements in other standards or individual specifications may complement this standard, if they are justified. Specific requirements related to practices necessary to assure defined levels of functional safety are to be determined in accordance with 4.6.3.1 and 4.6.3.2 of IEC 62278 and its informative Annex A. Software safety integrity level of 1 or higher shall only be considered when it is shown that a residual safety risk remains and that it has to be carried by the software driven programmable electronic system. In such a case (i.e. software safety integrity level 1 or higher), IEC 62279 is applicable. For the purposes of this standard, electronic equipment is defined as equipment mainly composed of semiconductor devices and recognized associated components. These components will mainly be mounted on printed boards. NOTE Sensors (current, voltage, speed, etc.) and firing unit printed board assemblies for power electronic devices are covered by this standard. Complete firing units are covered by IEC 61287-1.

Electronic equipment used on rail vehicles

ICS
45.060;45.060.01
CCS
S35
发布
2006-12
实施

この規格は,主として,電車,内燃動車,客車などの旅客車用構体が耐えなければならない荷重を規定し,その荷重にとって構体に発生する応力と使用材料の特性とを考慮に入れて構造設計を行うときの標準的な強度評価方法について規定する。この規格に規定する荷重条件は,長年の実績と実験データとに基づいているが,車両の運用計画によって荷重条件は変化するので,構造設計に適用する荷重条件は,受渡当事者間の協定による。備考この規格は,ゴムタイヤなどを用いる無軌条電車,モノレール車両,中量軌道システム車両,磁気浮上車両などの特殊鉄道用車両の構体には適用しない。用する荷重の考え方及び構体に使用する材料の許容応力は,この規格を適用してもよい。

Rolling stock -- General requirements of carbody structures for passenger car

ICS
45.060;45.060.01
CCS
S30
发布
2006-02-06
实施

この規格は,JIS E 5004-1に規定する鉄道車両用電気品に対する一般便用条件茂び一般規則に加えて,鉄道車両の電力回路,補助回路,制御回路,表示回路などに使われる電気機器に関する一般的な規則について規定する。すなわち,この規格の目的は,鉄道車両のすべての電気機器に対してJIS E 5004-1に規定する一般規則を適合させたうえで,その対応する電気機器の範囲に対する要求及び試験の統一を図るものである。ここでいう電気機器とは,制御と無関係な,主として開閉機器及び制御機器であるが,リレー,制御弁,抵抗器,ヒューズなども含む。

Electric equipment for rolling stock -- Part 2: Electrotechnical components -- General rules

ICS
45.060;45.060.01
CCS
S34
发布
2006-02-06
实施



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号