45.080;93.100 标准查询与下载
共找到 14 条与 相关的标准，共 1 页
Flat bottom (Vignole) railway rails 43 kg/m and above
- ICS
- 45.080;93.100
- CCS
- S11
- 发布
- 2016-03
- 实施
Cette Norme européenne caractérise la qualité de la géométrie des voies sur la base des paramètres définis dans l'EN 13848-1 et spécifie les différentes classes de géométrie de voie qui doivent être considérées.
Railway applications - Track - Track geometry quality - Part 6 : characterisation of track geometry quality
- ICS
- 45.080;93.100
- CCS
- 发布
- 2014-06-14
- 实施
- 2014-06-14
This European Standard specifies Vignole railway rails of 46 kg/m and greater linear mass, for conventional and high speed railway track usage. Nine pearlitic steel grades are specified covering a hardness range of 200 HBW to 440 HBW and include non heat treated non alloy steels, non heat treated alloy steels, and heat treated non alloy steels and heat treated alloy steels. There are 23 rail profiles specified inThis standard. Two classes of rail straightness are specified, differing in requirements for straightness, surface flatness and crown profile. Two classes of profile tolerances are specified.
Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above
- ICS
- 45.080;93.100
- CCS
- 发布
- 2011-02-01
- 实施
Railway applications - Track - Special purpose rail - Grooved and associated construction
- ICS
- 45.080;93.100
- CCS
- 发布
- 2010-03-31
- 实施
- 2010-03-31
Railway applications - Track - Special purpose rail - Grooved and associated construction.
- ICS
- 45.080;93.100
- CCS
- S11
- 发布
- 2010-01-01
- 实施
- 2010-01-28
Railway applications - Track - Track alignment design parameters - Track gauges 1435 mm and wider - Part 2 : switches and crossings and comparable alignment design situations with abrupt changes of curvature.
- ICS
- 45.080;93.100
- CCS
- S11
- 发布
- 2010-01-01
- 实施
This European Standard specifies requirements for grooved rails and associated construction rail profiles for grooved rail facilities with a linear mass of 42 kg/m and upwards for use in tram transport systems. NOTE Grooved rails are also used for harbour and industrial tracks. Six pearlitic steel grades are specified in a hardness range between 200 HBW and 390 HBW. The rails are either non-heat-treated or heat-treated and are made from non-alloyed (C-Mn) steel in both cases. This standard specifies 18 specific grooved rail profiles and 7 specific construction rail profiles. The grooved rail profiles can also be used as construction elements in switches and crossings. Two grooved rail classes are specified differing in requirements for profile tolerances.
Railway applications - Track - Special purpose rail - Grooved and associated construction
- ICS
- 45.080;93.100
- CCS
- S11
- 发布
- 2009-11
- 实施
This European Standard specifies the minimum requirements that shall be met by measuring systems fitted on track construction and maintenance machines to give an evaluation of track geometry quality when measuring one or more of the parameters described in EN 13848-1. It does not seek to prescribe which parameters are to be measured, since these depend upon the measuring capabilities of the machine and the purpose for which the machine or its measuring system is used. It also sets out the acceptable differences from EN 13848-1 when using track construction and maintenance machines to measure track geometry. It applies to track geometry measuring systems which are fitted to track construction and maintenance machines from one year after the date of implementation of this standard.
Railway applications - Track - Track geometry quality - Part 3:Measuring systems - Track construction and maintenance machines
- ICS
- 45.080;93.100
- CCS
- S11
- 发布
- 2009-06-30
- 实施
- 2009-06-30
This European Standard specifies Vignole railway rails of 46 kg/m and greater linear mass, for general and high speed railway track usage. Seven pearlitic steel grades are specified covering a hardness range of 200 to 390 HBW and include non heat treated carbon manganese steels; non heat treated alloy steels; and heat treated carbon manganese and Iow alloy steels. There are 21 rail profiles specified in this Standard. Two classes of rail straightness are specified, differing in requirements for straightness, surface flatness and crown profile. Two classes of profile tolerances are specified.
Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above (includes Amendment A1:2007); English version of DIN EN 13674-1：2008-01
- ICS
- 45.080;93.100
- CCS
- S11
- 发布
- 2008-01
- 实施
This part of EN 13232 covers the following subjects:to establish a working terminology for expansion devices,for their constituent parts and for the types;to specify the minimum manufacturing requirements for expansion devices and their constituent parts;to formulate codes of practice for inspection and tolerances;to define the method by which expansion devices and their parts should be identified and traced.
Railway applications - Track - Switches and crossings - Part 8: Expansion devices; English version of DIN EN 13232-8:2007-06
- ICS
- 45.080;93.100
- CCS
- S11
- 发布
- 2007-06
- 实施
This part of EN 13674 specifies flat bottom symmetrical railway rails of 46 kg/m and greater linear mass, for general and high speed railway track usage. Seven pearlitic steel grades are specified giving a hardness range between 200-390 HBW. The rails are either non heat treated carbon manganese or alloy steel, or heat treated carbon manganese or low alloy steel. There are 21 rail profiles specified in this Standard. Two rail classes are specified, differing in requirements for straightness, surface flatness and crown profile. Three classes of profile tolerances are specified.
Railway applications - Track; Rail - Part 1: Vignole railway rails 46 kg/m and above; German version EN 13674-1:2003
- ICS
- 45.080;93.100
- CCS
- S11
- 发布
- 2003-12
- 实施
This European Standard specifies Vignole railway rails of 46 kg/m and greater linear mass, for general and high speed railway track usage. Seven pearlitic steel grades are specified covering a hardness range of 200 to 390 HBW and include non heat treated carbon manganese steels; non heat treated alloy steels; and heat treated carbon manganese and low alloy steels. There are 21 rail profiles specified in this Standard. Two classes of rail straightness are specified, differing in requirements for straightness, surface flatness and crown profile. Two classes of profile tolerances are specified.
Railway applications - Track - Rail - Vignole railway rails 46 kg/m and above
- ICS
- 45.080;93.100
- CCS
- S11
- 发布
- 2003-10-03
- 实施
- 2003-10-03
Railway fixed equipment. Ballast and gravel for shovel-packing. Characteristics and specifications.
- ICS
- 45.080;93.100
- CCS
- S10
- 发布
- 1996-08-01
- 实施
- 1996-08-20
This British Standard specifies the dimensions and requirements for normal and high strength bolts and nuts for fishplates conforming to BS 47 : Part 1 : 1991 for use with railway rails conforming to BS 11 : 1985. The provisions of this specification are not restricted to fishbolts for use with rails and fishplates conforming to BS 11 : 1985 and BS 47 : Part 1 : 1991 and may be applied to fishbolts for any rail section of 24.8 kg/m (50 lb/yd) or greater linear mass and the complementary fishplates.
Specification for normal and high strength steel bolts and nuts for railway rail fishplates
- ICS
- 45.080;93.100
- CCS
- S11
- 发布
- 1992-11-15
- 实施
- 1992-11-15
