47.020.01;53.020.20 标准查询与下载

BS EN 13852-3:2021 起重机.海上起重机.通用海上起重机

This European Standard specifies the requirements for general-purpose offshore cranes including their supporting pedestals or structures. This standard applies to cranes manufactured after the date of issue of this standard. This European Standard does not cover: a) Fabrication, assembly, dismantling or changing the configuration of the crane; b) Lifting accessories, i.e. any item between the hook and the load; c) Sub-sea lifting operations; d) Design temperature below -20 ℃; e) Operations at an ambient temperature above 40 ℃; f) Lifting operations involving more than one crane; g) Transportation of the crane; h) Loads due to earthquake; i) Cranes on seagoing vessels, excluded from the scope of the Machinery Directive. The significant hazards covered by this European Standard are identified in clause 4. This standard includes requirements for the lifting of personnel. Where National Authorities permit the use of a general-purpose offshore crane for the lifting of personnel, the crane would at least need to fulfil the requirements of this standard.

Cranes - Offshore cranes - Part 1: General-purpose offshore cranes

BS EN 13852-2:2004 沥青和沥青粘合剂.阳离子沥青乳液规定框架

This document specifies the safety requirements for floating cranes including their supporting pedestals or structures. This document applies to cranes manufactured after the date of issue of this document. This document does not cover: a) fabrication, assembly, dismantling or changing the configuration of the crane; b) lifting accessories, i.e. any item between the hook and the load; c) design temperature below -20 ℃; d) operations at an ambient temperature above 50 ℃; e) cranes covered by the Machinery Directive. The significant hazards covered by this document are identified in clause 4. This document includes requirements for lifting of persons. The use of cranes for lifting of persons may be subject to specific national regulations. Where National Authorities permit the use of a floating crane for the lifting of persons, the crane would at least need to fulfil the requirements of this standard and be adopted in accordance with the relevant National regulations for the lifting of persons.

Cranes-Offshore cranes-Part 2:Floating cranes

LST EN 13852-2-2005 起重机 海上起重机 第2部分：浮式起重机

Cranes - Offshore cranes - Part 2: Floating cranes

BS EN 13852-1:2004 起重机.海上起重机.通用海上起重机

This European Standard specifies the requirements for general-purpose offshore cranes including their supporting pedestals or structures. This standard applies to cranes manufactured after the date of issue of this standard. This European Standard does not cover: a) Fabrication, assembly, dismantling or changing the configuration of the crane; b) Lifting accessories, i.e. any item between the hook and the load; c) Sub-sea lifting operations; d) Design temperature below -20 ℃; e) Operations at an ambient temperature above 40 ℃; f) Lifting operations involving more than one crane; g) Transportation of the crane; h) Loads due to earthquake; i) Cranes on seagoing vessels, excluded from the scope of the Machinery Directive. The significant hazards covered by this European Standard are identified in clause 4. This standard includes requirements for the lifting of personnel. Where National Authorities permit the use of a general-purpose offshore crane for the lifting of personnel, the crane would at least need to fulfil the requirements of this standard.

Cranes - Offshore cranes - Part 1: General-purpose offshore cranes

EN 13852-2:2004 起重机.海上起重机.第2部分:浮动式起重机

This document specifies the safety requirements for floating cranes includingTheir supporting pedestals orstructures.This document applies to cranes manufactured afterThe date of issue of this document.This document includes requirements for lifting of persons.The use of cranes for lifting of persons may besubject to specific national regulations. Where National Authorities permitThe use of a floating crane forThelifting of persons,The crane would at least need to fulfilThe requirements of this standard and be adopted inaccordance withThe relevant National regulations forThe lifting of persons.

Cranes - Offshore cranes - Part 2: Floating cranes

SAE J1366-1994 对在海洋环境中平台上运行的起重机进行评级

The scope of this SAE Information Report is limited to a lift crane mounted on a fixed or floating platform, lifting loads from a vessel alongside. The size of the vessel is assumed not to exceed that of a workboat as defined in 4.15. The purpose of this document is to establish the design dynamic loads, the calculation procedures for rated loads, and a load-rating chart format for lift cranes operating in a variety of sea conditions.

Rating Lift Cranes Operating on Platforms in the Ocean Environment