49.100;49.120 标准查询与下载

BS ISO 21100:2014 航空货物装置负载设备.性能要求和测试参数

Air cargo unit load devices. Performance requirements and test parameters

ISO 21100:2014 空运贷物单位负荷设备. 性能要求和试验参数

Air cargo unit load devices - Performance requirements and test parameters

BS ISO 6966-2:2014 飞行器地面设备.基本要求.安全要求

Aircraft ground equipment. Basic requirements. Safety requirements

ISO 6966-2:2014 飞行器地面设备.基本要求.第2部分:安全要求

This part of ISO 6966 specifies the minimum design requirements applicable to all aircraft ground support equipment (GSE), as defined in 3.1 hereafter, in order to ensure a) safety of staff operating or maintaining the equipment or in its vicinity, and b) protection of aircraft against interference or damage. An informative list of the most commonly used pieces of ground equipment is provided in Annex A hereafter. Nevertheless, the requirements of this part of ISO 6966 apply to any piece of aircraft ground support equipment, as defined, used on airports. This part of ISO 6966 does not intend to provide all the design requirements applicable for aircraft ground support equipment. Other requirements apply, and can be found in separate International Standards: ground support equipment; aircraft ground support equipment intended for handling and loading of baggage and cargo unit load devices; — specific International Standards, listed in the Bibliography, define the functional and performance requirements for certain types of aircraft ground support equipment. In most countries, standing Government Health and Safety laws and regulations apply to machinery, implicitly or explicitly, including aircraft ground support equipment. Nothing in this part of ISO 6966, however, shall be deemed or otherwise used to supersede any locally applicable law or regulation, unless a specific exemption has been obtained for this purpose from the appropriate Authority. This part of ISO 6966 does not apply to automotive vehicles or parts thereof approved for public vehicles, when used on aircraft ground support equipment for the purpose for which they are designed.

Aircraft ground equipment - Basic requirements - Part 2: Safety requirements

BS DD ISO/PAS 21100:2011 航空货物装置负载设备.性能要求和测试参数

Air cargo unit load devices. Performance requirements and test parameters

ISO/PAS 21100:2011 空运货物成组装运设备新要求和测试参数

Air cargo unit load devices - Performance requirements and test parameters

NF E54-001-2/IN1*NF EN 1915-2/IN1:2010 飞行器地面支持设备.一般要求.第2部分:稳定性和强度的要求,计算和试验方法.

Aircraft ground support equipment - General requirements - Part 2 : stability and strength requirements, calculations and test methods.

KS W ISO 4116:2008 空中货运设备.与航空器成组货件装置相配合的地面设备要求

이 표준은 이 표준의 제정 후에 항공화물장치를 생산하는 생산자와 장착자에게 적용하기 위한

Air cargo equipment－Ground equipment requirements for compatibility with aircraft unit load devices

BS ISO 6967:2006 飞行器地面设备.主要甲板集装箱/托盘装载机.功能要求

This International Standard does not provide all the design requirements applicable for aircraft main deck loaders. Other requirements can be found in separate International Standards: ⎯ ISO 4116 specifies the additional requirements applicable for conveying surfaces of those pieces of aircraft ground support equipment intended for handling and loading of baggage and cargo unit load devices; ⎯ ISO 6966-1 and ISO 6966-2 specify, respectively, the general and safety-related requirements applicable to all aircraft ground support equipment. The requirements of this International Standard were determined based on generally recognized assumptions with regard to a) the normally intended use of aircraft ground support equipment, when used on the ramp of international civil airports in order to handle, service or maintain civil transport aircraft; b) the environmental (surface, slope, weather, lighting, operating rules, staff qualification, etc.) conditions prevailing on the ramp area of the majority of international civil airports. It is assumed the manufacturers of aircraft main deck loaders define in the relevant documentation the specifically intended conditions of use and environment for each item of equipment, and the purchasers systematically review their own specific conditions of use and environment in order to determine whether those stated are adequate, or negotiate with the manufacturer appropriate modifications to ensure they are.

Aircraft ground equipment - Main deck container/pallet loader - Functional requirements

BS ISO 6968:2006 飞行器地面设备.底舱板装载机.功能要求

This International Standard specifies the functional requirements for a self-propelled loader capable of raising air cargo unit load devices (ULDs) with base dimensions and maximum mass as follows: This International Standard does not intend to provide all the design requirements applicable for aircraft lower deck loaders. Other requirements can be found in separate International Standards: — ISO 4116 specifies the additional requirements applicable for conveying surfaces of those pieces of aircraft ground support equipment intended for handling and loading of baggage and cargo unit load devices; — ISO 6966-1 and ISO 6966-2 specify, respectively, the general and safety-related requirements applicable to all aircraft ground support equipment. The requirements of this International Standard were determined based on generally recognized assumptions with regard to a) the normally intended use of aircraft ground support equipment, when used on the ramp of international civil airports in order to handle, service or maintain civil transport aircraft; b) the environmental (surface, slope, weather, lighting, operating rules, staff qualification, etc.) conditions prevailing on the ramp area of the majority of international civil airports. It is assumed the manufacturers of aircraft lower deck loaders define in the relevant documentation the specifically intended conditions of use and environment for each item of equipment, and the purchasers systematically review their own specific conditions of use and environment in order to determine whether those stated are adequate, or negotiate with the manufacturer appropriate modifications to ensure they are.

Aircraft ground equipment - Lower deck loader - Functional requirements

ISO 6967:2006 飞行器地面设备.主要甲板装载机.功能要求

This International Standard does not provide all the design requirements applicable for aircraft main deck loaders. Other requirements can be found in separate International Standards: ⎯ ISO 4116 specifies the additional requirements applicable for conveying surfaces of those pieces of aircraft ground support equipment intended for handling and loading of baggage and cargo unit load devices; ⎯ ISO 6966-1 and ISO 6966-2 specify, respectively, the general and safety-related requirements applicable to all aircraft ground support equipment. The requirements of this International Standard were determined based on generally recognized assumptions with regard to a) the normally intended use of aircraft ground support equipment, when used on the ramp of international civil airports in order to handle, service or maintain civil transport aircraft; b) the environmental (surface, slope, weather, lighting, operating rules, staff qualification, etc.) conditions prevailing on the ramp area of the majority of international civil airports. It is assumed the manufacturers of aircraft main deck loaders define in the relevant documentation the specifically intended conditions of use and environment for each item of equipment, and the purchasers systematically review their own specific conditions of use and environment in order to determine whether those stated are adequate, or negotiate with the manufacturer appropriate modifications to ensure they are.

Aircraft ground equipment - Main deck loader - Functional requirements

ISO 6968:2005 飞行器地面设备.底舱板装载机.功能要求

This International Standard specifies the functional requirements for a self-propelled loader capable of raising air cargo unit load devices (ULDs) with base dimensions and maximum mass as follows: This International Standard does not intend to provide all the design requirements applicable for aircraft lower deck loaders. Other requirements can be found in separate International Standards: — ISO 4116 specifies the additional requirements applicable for conveying surfaces of those pieces of aircraft ground support equipment intended for handling and loading of baggage and cargo unit load devices; — ISO 6966-1 and ISO 6966-2 specify, respectively, the general and safety-related requirements applicable to all aircraft ground support equipment. The requirements of this International Standard were determined based on generally recognized assumptions with regard to a) the normally intended use of aircraft ground support equipment, when used on the ramp of international civil airports in order to handle, service or maintain civil transport aircraft; b) the environmental (surface, slope, weather, lighting, operating rules, staff qualification, etc.) conditions prevailing on the ramp area of the majority of international civil airports. It is assumed the manufacturers of aircraft lower deck loaders define in the relevant documentation the specifically intended conditions of use and environment for each item of equipment, and the purchasers systematically review their own specific conditions of use and environment in order to determine whether those stated are adequate, or negotiate with the manufacturer appropriate modifications to ensure they are.

Aircraft ground equipment - Lower deck loader - Functional requirements

KS W 1542-1999 航空器.宽体航空器底舱面集装箱/托盘装载机.功能要求

이 규격은 다음과 같은 기준 치수와 최대 중량을 가지는 파렛트와 컨테이너를 올릴 수 있는

Aircraft-Wide body aircraft lower deck container / pallet loader-Functional requirement

BS M 89:1996 飞机地面支持设备 装载和维修设备的稳定性要求

1 This International Standard specifies: a) the criteria to be used to determine stability of aircraft loading and servicing equipment, including wind loads; b) the classification of systems recommended to achieve stability; c) the formula to be used for calculating steady-state wind stability; d) the recommended test methods applicable to equipment. 2 The intent of this International Standard is not to specify equipment design, but rather to define uni-form criteria, calculation and testing methods in order to provide a safe work environment under all predict-able circumstances for the users of aircraft loading and servicing equipment. 3 This International Standard specifies the world-wide requirements recognized by aircraft and equip-ment manufacturers as well as airlines and handling agencies. In addition, it shall be applied with due reference to national governmental regulations of the country where the equipment is to be operated. 4 This International Standard applies to aircraft loading and servicing equipment, typically but not exclusively defined as follows: — container and pallet loaders (see ISO 6967 and ISO 6968); — catering trucks (see ISO 10841); — passenger stairs (see ISO 12056); — maintenance and fueling access platforms, when operated in a static position on an aircraft. 5 This International Standard does not apply to: — forklifts; — aircraft de-icers; — any equipment with rotating booms, and more generally any equipment the normal mode of operation of which includes moving in the elevated position.

Aircraft ground support equipment. Stability requirements for loading and servicing equipment

ISO 11995:1996 航空器 装载和服务设备的稳定性要求

Specifies the criteria to be used to determine stability of aircraft loading and servicing equipment, including wind loads. Is intended to define uniform criteria, calculation and testing methods in order to provide a safe work environment under all predictable circumstances.

Aircraft - Stability requirements for loading and servicing equipment

BS M 81:1995 航空货运设备.宽体飞机底层舱集装箱/托盘装载机.功能要求

This International Standard specifies the functional requirements for a self-propelled loader capable of raising pallets and containers with standard base di-mensions and maximum weights as follows: This International Standard shall be read in conjuctior with ISO 4116. For further information, see IATA Specification AHM 931, Functional specification for lower deck container!pallet loader. note:1) The term "weight" is used in this International Standard instead of the correct technical term "mass" in order to conform to current commercial usage. 2) AHM 931 is part of the IATA Airport Handling Manual, which is available from: IATA Publications Dept., 2000 Peel Street, Montreal, Quebec H3A 2R4, Canada, or: IATA Publications Dept., Route de I'Aeroport 33, PO Box 672, CH-1215 Geneva 15 Airport, Switzerland.

Air cargo equipment - Wide body aircraft lower deck container/pallet loader - Functional requirements

BS M 80:1995 航空货运设备.宽体飞机主层舱集装箱/托盘装载机.功能要求

This International Standard specifies the functional requirements for a self-propelled loader capable of raising pallets and containers with base dimensions and maximum weights as follows: This International Standard shall be read in conjunc-tion with ISO 4116. For further information, see IATA Specification AHM 932, Functional specification for main deck container/pallet loader. note:1) The term "weight" is used in this International Standard instead of the correct technical term "mass", in order to conform to current commercial usage. 2) AHM 932 is part of the IATA Airport Handling Manual, which is available from: IATA Publications Dept, 2000 Peel Street, Montreal, Quebec H3A 2R4, Canada, or: IATA Publications Dept., Route de I'Aeroport 33, PO Box 672, CH-1215 Geneva 15 Airport, Switzerland.

Air cargo equipment - Wide body aircraft main deck container/pallet loader - Functional requirements

ISO 6967:1994 航空器 宽体飞机主舱集装箱/抚盘装载机 功能要求

Specifies the requirements for a self-propelled loader capable of raising pallets and containers with base dimensions and maximum weights according to the table. Gives information on structure and overall dimensions, platform design, guide rails and stops, platform operation and loading, mobility and stability and controls.

Aircraft - Wide body aircraft main deck container/pallet loader - Functional requirements