共找到 990 条与 输送机零部件 相关的标准,共 66 页
本文件规定了地下矿井用钢丝绳芯阻燃输送带(简称带)的结构、标记、技术要求、试验方法、检验、标志、包装、贮存和运输。 本文件适用于地下矿井使用的钢丝绳芯阻燃输送带。
Flame retardant steel cord conveyor belts used in underground mines
本标准规定了输送带机械接头强度的静态试验方法。该接头可以使用连接轴杆连接,也可以不使用连接轴杆连接。本标准不涉及硫化接头。本标准适用于织物芯叠层输送带和织物整芯输送带的机械接头。本标准不适用于GB/T398
Conveyor belts—Determination of strenght of mechanical fastenings—Static test method
本标准规定了输送带的最大表面电阻及试验方法。本标准是用来保证输送带有足够的导电性,避免在使用过程中静电荷累积。本标准适用于除GB/T39825[3]规定的轻型输送带之外的输送带。轻型输送带静电性能的测定见[]GB/T332042 。
Conveyor belts—Electrical conductivity—Specification and test method
本标准规定了轻型输送带的基本结构、性能及应用。本标准适用于轻型输送带。
Light conveyor belts—Principal characteristics and applications
本标准规定了输送带处于相对高的局部热源(比如火)中可燃性能的试验方法。本标准适用于阻燃输送带丙烷燃烧器中规模可燃性试验。
Conveyor belts—Propane burner mid-scale flammability test method
本标准规定了输送带过渡距离的计算公式并详细说明了其应用和推导。[]本标准不适用于ISO21183 11 规定的轻型输送带。
Conveyor belts—Determination of minimum transition distance on three idler rollers
本标准规定了织物芯输送带的宽度和长度及相应的极限偏差。本标准不适用于GB/T39825[1]规定的轻型输送带,切割式轻型输送带的宽度和长度极限偏差见[]GB/T398232 规定。2 宽度及极限偏差
Conveyor belts with textile carcass—Widths and lengths
GB/T28267 的本部分规定了以纵向钢丝绳作为增强体的输送带的性能和结构要求。第6 章规定的结构要求适用于单根带的设计和GB/T28267.2 中全部型号系列的设计。
Steel cord conveyor belts—Part 1:Design,dimensions and mechanical requirements for conveyor belts for general use
本标准规定了钢丝绳与包覆橡胶之间粘合强度(包括原始状态下和热老化后)的试验方法。本标准适用于有金属骨架的输送带。
Steel cord conveyor belts—Cord-to-coating bond test—Initial test and after thermal treatment
本标准规定了非井下设备使用的普通用途输送带的导电性和可燃性安全要求及安全水平类别。本标准适用于非井下设备使用的输送带。
Conveyor belts for general purpose use—Electrical and flammability safety requirements
本标准规定了GB/T39825描述的切割式轻型输送带长度和宽度的测量方法及极限偏差。 本标准适用于轻型输送带。
Light conveyor belts—Tolerances on widths and lengths of cut light conveyor belts
本标准规定了输送带贮存和搬运最适宜条件的指导性原则。本标准不适用于ISO21183 1 规定的轻型输送带。
Conveyor belts—Guidelines for storage and handling
本标准规定了钢丝绳芯输送带覆盖层与带芯层之间粘合强度的试验方法。本标准适用于钢丝绳芯输送带。
Steel cord conveyor belts—Adhesion strength test of the cover to the core layer
Textile conveyor belts—Full thickness tensile strength,elongation at break and elongation at the reference load—Test method
Conveyor belts—Determination of minimum pulley diameters
Heat resistant conveyor belts of duck construction
General technical conditions for electrical control device of passenger ropeway
Safety requirements of carriers for passenger transportation by rope
Conveyor belts—Determination of elastic and permanent elongation and calculation of elastic modulus
本标准规定了切割式轻型输送带的产品分类技术要求.试验方法.检验规则及标志,包装.贮存和搬运。 本标准适用于纺织.轻工.食品.电子等行业的轻便输送机用轻型输送带(以下简称轻型带或带);本标准不适用于与食品直接接触的轻型带。
Light conveyor belts
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号