53.040.30 气动运输及其零部件 标准查询与下载
共找到 56 条与 气动运输及其零部件 相关的标准，共 4 页
本标准规定了吸粮机技术性能的试验方法。 本标准适用于港口吸粮机。
Test methods of port pneumatic grain unloader
- ICS
- 53.040.30
- CCS
- R46;
- 发布
- 1993-12-10
- 实施
- 1994-08-01
本标准规定了港口吸粮机的技术要求、标志、包装、运输和贮存。 本标准适用于港口吸粮机的设计、制造。
Specifications of port pneumatic grain unloader
- ICS
- 53.040.30
- CCS
- R46;
- 发布
- 1993-12-10
- 实施
- 1994-08-01
本文件规定了一般用途芳纶织物芯阻燃输送带(以下简称“带”)的术语和定义、结构、型号与标记、技术要求、试验方法、检验、标志、包装、贮存和运输。 本文件适用于化工、煤炭、冶金和电力等行业工作环境温度为-20℃～45℃的一般用途芳纶织物芯阻燃输送带。 本文件不适用于煤矿井下用阻燃输送带。
General purpose aramid fabric core flame retardant conveyor belt
- ICS
- 53.040.30
- CCS
- C291
- 发布
- 2022-10-18
- 实施
- 2023-01-18
Continuous mechanical handling equipment for loose bulk materials —Dimensions of bends for use in pneumatic handling
- ICS
- 53.040.30
- CCS
- 发布
- 20211012
- 实施
- 20211012
Continuous mechanical handling equipment for loose bulk materials —Couplings and hose components used in pneumatic handling — Safety code
- ICS
- 53.040.30
- CCS
- 发布
- 20211012
- 实施
- 20211012
Pneumatic handling appliances for loose bulk materials — Piping
- ICS
- 53.040.30
- CCS
- 发布
- 20211012
- 实施
- 20211012
This International Standard specifies, in addition to the general safety rules set out in ISO 1819, the special safety rules for couplings and hose components used in the pneumatic handling of loose bulk materials.
Continuous mechanical handling equipment for loose bulk materials -- Couplings and hose components used in pneumatic handling -- Safety code
- ICS
- 53.040.30
- CCS
- 发布
- 2015-09-03
- 实施
The standard introduces important technological parameters and equipment of pneumatic conveyor systems. An overview of the constructive design of pneumatic conveying systems and their components complements the procedural part. Pneumatic conveying is considered generally the Transport of solids with the help of flowing gases, usually air, which is done as for the single phase flow by tubular conveyor pipes. Conveyed materials are predominantly granular and powdery, free-flowing solids.
Pneumatic conveying plants - Fundamentals, plants, components
- ICS
- 53.040.30
- CCS
- 发布
- 2015-07
- 实施
Continuous mechanical handling equipment for loose bulk materials - Dimensions of bends for use in pneumatic handling
- ICS
- 53.040.30
- CCS
- 发布
- 2014-11-29
- 实施
- 2014-11-29
This International Standard specifies the Dimensions of bends for use in pneumatic handling for loose bulk materials, in three series : light, moderate and heavy
Continuous mechanical handling equipment for loose bulk materials -- Dimensions of bends for use in pneumatic handling
- ICS
- 53.040.30
- CCS
- 发布
- 2013-04-01
- 实施
This International Standard specifies the dimensions of piping used in the pneumatic handling of loose bulk materials, in three series, light, medium and strong.
Pneumatic handling appliances for loose bulk materials -- Piping
- ICS
- 53.040.30
- CCS
- 发布
- 2013-04-01
- 实施
This standard specifies the special safety requirements for those types of fixed pneumatic handling systems and components as defined in clause 3, which are designed for conveying bulk materials on a continuous or an intermittent basis (batch conveying system) from the loading point(s) to the unloading point(s). 1.2 This European standard deals with the technical requirements to minimise the hazards listed in clause 4 which can arise during the operation and the maintenance of the pneumatic conveying system. when carried out in accordance with the specifications given by the manufacturer or his authorised representative. Annex A gives a list of hazards according to EN ISO 12100-1 and the safety requirements and/or measures are specified in the same order as they are given in Annex A. 1.3 This standard applies to design, on site assembly, and commissioning stages. 1.4 This standard applies also to the built-in actuators and parts of the systems, which control the components. 1.5 Exclusions This standard does not specify the requirements for any elements used as a link between a fixed part(s) of the system and any other part mounted on mobile/movable supports (e.g.: ship, unloaders, ...). This standard does not take into account the risks of burns and scalds by the radiation of heat sources or by contact with hot gases. This standard does not take into account the risk generated by ionising materials used in measuring equipment (e.g. level indicators). This standard does not specify the requirements for handling specific hazardous materials, such as radiating material, explosives, explosive gases, ... This standard does not specify the requirements for hazards due to electrostatic charges of pipes and equipment made of non-metallic materials. The safety requirements for the transportation including loading and unloading of the components are not covered by this standard.
Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials
- ICS
- 53.040.30
- CCS
- 发布
- 2011-10-12
- 实施
1.1 This standard specifies the special safety requirements for those types of fixed pneumatic handling systems and components as defined in clause 3, which are designed for conveying bulk materials on a continuous or an intermittent basis (batch conveying system) from the loading point(s) to the unloading point(s). 1.2 This European standard deals with the technical requirements to minimise the hazards listed in clause 4 which can arise during the operation and the maintenance of the pneumatic conveying system. when carried out in accordance with the specifications given by the manufacturer or his authorised representative. Annex A gives a list of hazards according to EN ISO 12100-1 and the safety requirements and/or measures are specified in the same order as they are given in Annex A. 1.3 This standard applies to design, on site assembly, and commissioning stages. 1.4 This standard applies also to the built-in actuators and parts of the systems, which control the components. 1.5 Exclusions This standard does not specify the requirements for any elements used as a link between a fixed part(s) of the system and any other part mounted on mobile/movable supports (e.g.: ship, unloaders, ...). This standard does not take into account the risks of burns and scalds by the radiation of heat sources or by contact with hot gases. This standard does not take into account the risk generated by ionising materials used in measuring equipment (e.g. level indicators). This standard does not specify the requirements for handling specific hazardous materials, such as radiating material, explosives, explosive gases, ... This standard does not specify the requirements for hazards due to electrostatic charges of pipes and equipment made of non-metallic materials. The safety requirements for the transportation including loading and unloading of the components are not covered by this standard.
Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials; German version EN 741:2000+A1:2010
- ICS
- 53.040.30
- CCS
- J81
- 发布
- 2011-06
- 实施
- 2011-06-01
Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials
- ICS
- 53.040.30
- CCS
- 发布
- 2011-03-18
- 实施
- 2011-03-18
This standard specifies the special safety requirements for those types of fixed pneumatic handling systems and components as defined in clause 3, which are designed for conveying bulk materials on a continuous or an intermittent basis (batch conveying system) from the loading point(s) to the unloading point(s).1.2 This European standard deals with the technical requirements to minimise the hazards listed in clause 4 which can arise during the operation and the maintenance of the pneumatic conveying system. when carried out in accordance with the specifications given by the manufacturer or his authorised representative.Annex A gives a list of hazards accord
Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials
- ICS
- 53.040.30
- CCS
- 发布
- 2011-02-24
- 实施
- 2011-02-24
This standard specifies the special safety requirements for those types of fixed pneumatic handling systems and components as defined in clause 3, which are designed for conveying bulk materials on a continuous or an intermittent basis (batch conveying system) from the loading point(s) to the unloading point(s). This European standard deals with the technical requirements to minimise the hazards listed in clause 4 which can arise during the operation and the maintenance of the pneumatic conveying system. when carried out in accordance with the specifications given by the manufacturer or his authorised representative. Annex A gives a list of hazards according to EN ISO 12100-1. and the safety requirements and/or measures are specified in the same order as they are given in Annex A. This standard applies to design, on site assembly, and commissioning stages. This standard applies also to the built-in actuators and parts of the systems, which control the components. Exclusions This standard does not specify the requirements for any elements used as a link between a fixed part(s) of the system and any other part mounted on mobile/movable supports (e. g.: ship, unloaders, ...). This standard does not take into account the risks of burns and scalds by the radiation of heat sources or by contact with hot gases. This standard does not take into account the risk generated by ionising materials used in measuring equipment (e. g. level indicators). This standard does not specify the requirements for handling specific hazardous materials, such as radiating material, explosives, explosive gases, ... This standard does not specify the requirements for hazards due to electrostatic charges of pipes and equipment made of non-metallic materials. The safety requirements for the transportation including loading and unloading of the components are not covered by this standard. This standard does not apply to pneumatic conveying systems used underground, for mining and in public areas. This European standard does not establish the additional requirements for: freezer applications, high temperatures, corrosive environments, strong magnetic fields, potentially explosive atmospheres, radioactive environment, operation on ships and earthquake effects, hazards during decommissioning. This standard does not specify the requirements for hazards due to noise.
Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials
- ICS
- 53.040.30
- CCS
- J81
- 发布
- 2010-12
- 实施
This guideline gives guidance in specifying process and operating conditions for pneumatic conveying systems to clearly address the technical characteristics to be agreed between the contracting parties, to avoid, to the greatest extent possible, insufficient information and misunderstandings. The technical conditions for which a pneumatic conveying system has been designed and under which it is intended to operate are essential here. The information listed in Section 3 serves this purpose.
Pneumatic conveying plants - Recommendations for requirements and characteristics
- ICS
- 53.040.30
- CCS
- 发布
- 2010-05
- 实施
1.1.1 This standard provides minimum requirements for the design, construction, installation, operation, testing, and maintenance of exhaust systems for air conveying of vapors, gases, mists, and noncombustible particulate solids except as modified or amplified by other applicable NFPA standards. 1.1.2 This standard does not cover exhaust systems for conveying combustible particulate solids that are covered in other NFPA standards (see A.1.1).
Standard for Exhaust Systems for Air Conveying of Vapors, Gases, Mists, and Noncombustible Particulate Solids
- ICS
- 53.040.30
- CCS
- V52
- 发布
- 2010
- 实施
Continuous mechanical handling equipment for loose bulk materials —Couplings and hose components used in pneumatic handling — Safety code
- ICS
- 53.040.30
- CCS
- 发布
- 2006-12-11
- 实施
이 규격은 경부하ㆍ중부하ㆍ고부하 시리즈에 대한 벌크성 물체의 공압 취급에 사용하는 배관
Pneumatic handling appliances for loose bulk materials－Piping
- ICS
- 53.040.30
- CCS
- J81
- 发布
- 2006-12-11
- 实施
- 2006-12-11
