55.230 发售机和自动售货机 标准查询与下载

GB 4706.72-2003 家用和类似用途电器的安全 商用售卖机的特殊要求

GB 4706.1—1998的该章用下述内容代替： GB 4706本部分涉及制备或交付食品、饮料和消费品的自动售卖机的安全。对于单相器具，其额定电压不超过250V；对于其他器具，其额定电压不超过480V。 就实际情况而言，本部分涉及器具出现的一般危险，而这些危险是用户和维修人员都能遇到的。 通常，本部分没有考虑儿童玩耍的器具。

Safety of household and similar electrical appliances Particular requirements for commercial dispensing appliances and vending machines

T/GDID 1091-2023 全自动手机壳无人售卖机

主要技术内容有术语和定义、组成、要求、试验方法、检验规则、标志、包装、运输和贮存。

Fully automatic mobile phone case self-service vending machine

T/DJPEC 0027-2023 自动售货机售后服务规范

本标准参考国内GB 4706.1-2005  《家用和类似用途电器的安全 第1部分：通用要求》第十章节与GB 4706.72-2008  《家用和类似用途电器的安全 商用售卖机的特殊要求》第十六与第十七章节中的具体要求。本团体标准在同行业内具有统一化、规范化、制度化及可操作性，按标准执行售后服务，提升客户体验感与满意度，市场客户一致反映效果良好，各项指标设置具有先进性、合理性和科学性，确保市场正常运营秩序，提高客户运营率。

Maintenance and service regulations of vending machine

T/DJPEC 0028-2023 非专用型自动售药机

本标准参考国内GB/T 28493-2012《瓶装、罐装和其它封装饮料自动售货机性能试验》、国际JIS B 8561-2007《自动售货机－试验方法》、JIS B 8562-2007《自动售货机－试验方法》，使国家标准真正落地，在企业内可以有效实施。并且与国家标准GB/T 28493-2012《瓶装、罐装和其它封装饮料自动售货机性能试验》相比，增加多项标准，并严于国家标准，各项指标设置具有先进性、合理性和科学性。本团体标准在同行业内具有可操作性、规范性，按标准生产的产品经过市场客户使用一致反映效果良好。

Non dedicated drug vending machine

T/HEBQIA 194-2023 饮料自动售货机

本文件规定了饮料自动售货机的结构、分类及代号、要求、检验方法、检验规则及标志、包装、运输和贮存。

Beverage vending machine

T/CASME 458-2023 自动售卖机通用技术规范

本文件规定了自动售卖机的术语和定义、工作条件、技术要求、试验方法以及标志、包装、运输和贮存等内容。

General technical specifications for vending machines

EN IEC 60335-2-75:2023 家用和类似用途电器 安全 第 2-75 部分：商用分配器具和自动售货机的特殊要求

IEC 60335-2-75:2012 deals with the safety of electric commercial dispensing appliances and vending machines for preparation or delivery of food, drinks and consumer products, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Examples of appliances that are within the scope of this standard are bulk tea or coffee brewing machines, cigarette vending machines, coffee grinders, commercial liquid heaters, coffee makers with or without integrated coffee grinder, coffee makers with cooling systems, hot and cold beverage vending machines, hot water dispensers, ice cream and whipped cream dispensers, ice dispensers, newspaper, audio or video tape or disc vending machines, packaged food and drink vending machines and refrigerated merchandisers. Appliances can have more than one function. Other standards may be applicable for some functions such as refrigeration (IEC 60335-2-24) and heating by microwaves (IEC 60335-2-25). This standard also deals with the hygiene aspects of appliances. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by users and maintenance persons. However, in general, it does not take into account young children playing with the appliance. This third edition cancels and replaces the second edition published in 2002 including its Amendment 1 (2004) and its Amendment 2 (2008). It constitutes a technical revision. The principal changes in this edition as compared with the second edition of IEC 60335-2-75 are as follows: some notes have been deleted or converted to normative text (5.2, 5.6, 5.104, 7.12.1, 7.12.101.1, 11.2, 11.8, 15.2.103, 15.2.104, 15.2.106, 15.2.109, 15.2.111, 19.102, 19.6, 19.13, 19.101, 22.6, 22.7, 22.112, 22.113, 22.114, 24.102, 27.2), added requirements for espresso coffee makers in 3.115, 22.114 and throughout standard, modified 11.4 to address heating appliances with electronic process controls and 11.6 to address combined appliances without electronic process controls, modified Clause 22 to indicate that pressure regulating devices are to be rendered inoperable and deleted ISO 13732-1 from Bibliography. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of publication. Keywords: Vending machines, Dispensers.

Household and similar electrical appliances - Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines

EN IEC 60335-2-75:2023/A11:2023 家用和类似用途电器 安全 第 2-75 部分：商用分配器具和自动售货机的特殊要求

IEC 60335-2-75:2012 deals with the safety of electric commercial dispensing appliances and vending machines for preparation or delivery of food, drinks and consumer products, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Examples of appliances that are within the scope of this standard are bulk tea or coffee brewing machines, cigarette vending machines, coffee grinders, commercial liquid heaters, coffee makers with or without integrated coffee grinder, coffee makers with cooling systems, hot and cold beverage vending machines, hot water dispensers, ice cream and whipped cream dispensers, ice dispensers, newspaper, audio or video tape or disc vending machines, packaged food and drink vending machines and refrigerated merchandisers. Appliances can have more than one function. Other standards may be applicable for some functions such as refrigeration (IEC 60335-2-24) and heating by microwaves (IEC 60335-2-25). This standard also deals with the hygiene aspects of appliances. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by users and maintenance persons. However, in general, it does not take into account young children playing with the appliance. This third edition cancels and replaces the second edition published in 2002 including its Amendment 1 (2004) and its Amendment 2 (2008). It constitutes a technical revision. The principal changes in this edition as compared with the second edition of IEC 60335-2-75 are as follows: some notes have been deleted or converted to normative text (5.2, 5.6, 5.104, 7.12.1, 7.12.101.1, 11.2, 11.8, 15.2.103, 15.2.104, 15.2.106, 15.2.109, 15.2.111, 19.102, 19.6, 19.13, 19.101, 22.6, 22.7, 22.112, 22.113, 22.114, 24.102, 27.2), added requirements for espresso coffee makers in 3.115, 22.114 and throughout standard, modified 11.4 to address heating appliances with electronic process controls and 11.6 to address combined appliances without electronic process controls, modified Clause 22 to indicate that pressure regulating devices are to be rendered inoperable and deleted ISO 13732-1 from Bibliography. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of publication. Keywords: Vending machines, Dispensers.

Household and similar electrical appliances - Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines

KS C IEC 60335-2-75-2023 家用和类似用途电器.安全.第2-75部分:商用点胶器具和自动售货机的特殊要求

Household and similar electrical appliances — Safety — Part 2-75: Particular requirements for commercial dispensing appliances and vending machines

T/QGCML 478-2022 预制菜专用储存和售卖设备

本文件规定了预制菜专用储存和售卖设备的术语和定义、型号和基本结构、要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于预制菜专用储存和售卖设备（简称“设备”）。

Special storage and sales equipment for prepared dishes

T/DJPEC 0023-2022 制冷自动售货柜检验规范

本标准主要内容包括范围，规范性引用文件，术语与定义，检验标准与方法等。技术指标方面从外观、噪声、售卖、安全、制冷/加热等多个方面对检验标准与具体检验方法进行要求与规范。 本标准参考国内GB/T 28493-2012《瓶装、罐装和其它封装饮料自动售货机性能试验》、国际JIS B 8561-2007《自动售货机－试验方法》、JIS B 8562-2007《自动售货机－试验方法》，并且与国家标准GB/T 28493-2012《瓶装、罐装和其它封装饮料自动售货机性能试验》相比，增加多项标准，并严于国家标准。本团体标准在同行业内具有可操作性、规范性，按标准检验的产品经过市场客户使用一致反映效果良好，各项指标设置具有先进性、合理性和科学性，为人们更加方便、愉悦的购物体验提供了有力支撑

Specification for inspection of refrigerated vending cabinets

T/DJPEC 0024-2022 制冷自动售货机能效试验规范

      本标准主要内容包括范围，规范性引用文件，术语与定义，试验标准与方法等。技术指标方面从24H基础耗电量、有效冷藏容积、总平均温度、能耗限定值等多个方面对试验设备、试验标准与具体试验方法进行要求与规范。       本标准参考国内GB 26920.3-2019《商用制冷器具能效限定值和能效等级 第三部分：制冷自动售货机》、GB/T 28493-2012《瓶装、罐装和其它封装饮料自动售货机性能试验》、国际JIS B 8561-2007《自动售货机－试验方法》、JIS B 8562-2007《自动售货机－试验方法》，使国家标准真正落地，在企业内可以有效实施。本团体标准在同行业内具有可操作性、规范性，按标准试验的产品经过市场客户使用一致反映效果良好，各项指标设置具有先进性、合理性和科学性，为人们更加方便、愉悦的购物体验提供了有力支撑。

Specifications for energy efficiency test of refrigeration vending machines

PN-EN IEC 63252-2021-04 E 自动售货机的能耗（IEC 63252:2020）

Energy consumption of vending machines (IEC 63252:2020)

T/HIS 003-2021 智能识别电子计价秤

       本标准给出了智能识别电子计价秤的产品分类、计量要求、技术要求、试验方法、检测规则和标志、包装、运输、贮存。适用于称重传感器为转换元件并带有载荷承载器、视觉识别单元和打印的电子计价秤

Intelligent identification electronic price calculation scale

PNS IEC 60335-2-75:2021 家用和类似用途电器.安全.第2-75部分：商用分配器具和自动售货机的特殊要求

Household and similar electrical appliances - Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines

ASTM F2891-15(2020)e1 机械制冷商用散装奶机标准规范

1.1 This specification covers commercial bulk milk dispensers which are for dispensing milk in the commercial and institutional food service establishments. These commercial bulk milk dispensers are self-contained, manually-operated, gravity-fed, mechanically refrigerated cabinet(s) with lift-up or push-type valves. These units are intended to dispense refrigerated milk and fluid milk products. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Commercial Bulk Milk Dispensers, Mechanically Refrigerated

ASTM F918-15(2020)e1 饮料分配器（可视产品）用非碳化机械制冷的标准规范

1.1 This specification covers counter-top model noncarbonated beverage dispensers that are mechanically refrigerated and have rigid, transparent, impact-resistant containers to afford a visual display of the beverage dispensed. The beverage dispensers covered by this specification are intended to circulate, cool, and dispense noncarbonated beverages such as pulpy juices, frozen concentrates, and syrup drinks. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The following safety hazard caveat pertains only to the test method portion, Section 11, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Noncarbonated Mechanically Refrigerated Beverage Dispenser (Visible Product)

T/DLQYLHH 003-2019 杯式饮料自动售货机

本标准规定了杯式饮料自动售货机的术语和定义、产品分类、要求、试验方法、检验规则、标志包装、运输与贮存。 本标准适用于10料仓及以下的杯式饮料自动售货机，研磨、萃取装置适用于咖啡和茶叶。

Cup Vending Machine

T/DLQYLHH 002-2019 综合自动售货机

本标准规定了综合自动售货机的术语和定义、产品分类、要求、试验方法、检验规则、标志包装、运输与贮存。 本标准适用于80货道及以下的综合（带包装）自动售货机等。

Comprehensive Vending Machine

T/DLQYLHH 004-2019 自动售饭机

本标准规定了自动售饭机的术语和定义、产品分类、要求、试验方法、检验规则、标志 包装、运输与贮存。 本标准适用于12货道及以下的自动售饭机。

Bento Vending Machine