共找到 17 条与 相关的标准,共 2 页
GB/T 24132的本部分规定了PVC涂覆织物(简称涂覆织物)的技术要求。涂覆织物是在针织物的单面充分连续均匀地涂覆一层弹性聚氯乙烯高聚物或主要成分是聚氯乙烯的共聚物而制成,这种涂层称为聚氯乙烯涂覆层。 本部分适用于致密性聚氯乙烯涂覆织物,也适用于其他两种类型的发泡聚氯乙烯涂覆织物。
Plastics-coated fabrics for upholstery.Part 1:Specification for PVC-coated knitted fabrics
GB/T 24132的本部分规定了室内装饰用聚氨酯涂覆织物规的技术要求。它是在编织织物的单面充分均匀地涂覆一层聚氨酯高聚物而制成。
Plastics-coated fabrics for upholstery.Part 3:Specification for polyurethane-coated woven fabrics
GB/T 24132的本部分规定了装饰用聚氯乙烯涂覆织物的技术要求。该涂覆织物是在编织织物的单面充分均匀地涂覆一层弹性聚氯乙烯高聚物或主要成分是聚氯乙烯的共聚物而制成,这种涂层称为聚氯乙烯涂覆层。 本部分适用A和B两个级别的聚氯乙烯涂覆织物。
Plastics-coated fabrics for upholstery.Part 2:Specification for PVC-coated woven fabrics
Rubber- or plastic-coated fabrics - Upholstery fabrics - Classification and methods of test; German version EN 15618:2009+A1:2012
This European Standard specifies a set of properties relevant to the assessment of upholstery coated fabrics for indoor furniture and the appropriate test methods to determine these properties. It also describes a matrix system to express the material pro
Rubber- or plastic-coated fabrics - Upholstery fabrics - Classification and methods of test
This European standard specifies a test method for assessing resistance to soiling and cleanability of coated fabrics for upholstery. This European standard is applicable to upholstery fabrics with a coating on the wear face.
Rubber- or plastic-coated fabrics - Upholstery fabrics - Resistance to soiling
Plastics-coated fabrics for upholstery. Part 1. Specification for polyvinylchloride-coated knitted fabrics
Rubber- or plastic-coated fabrics. Upholstery fabrics. Classification and methods of test
本标准规定了浮顶油罐软密封装置橡胶密封带的结构、尺寸及公差、要求、试验方法、检验规则和标志、包装、运输、贮存等。 本标准适用于织物两面涂覆耐原油及轻质油品(苯及芳香烃除外)的橡胶而制成的浮顶油罐软密封装置橡胶密封带。
Seal installation for oil storaged tank's.Rubber seal belt
This standard specifies a set of properties relevant to the assessment of upholstery coated fabrics for indoor furniture and the appropriate test methods to determine these properties. It also describes a matrix system to express the material properties of an upholstery fabric. This standard applies to upholstery fabrics both in domestic and public use, except when used for the seats of road or railway vehicles, boats or aeroplanes. This standard applies to upholstery fabrics with a coating on the wear face. This standard does not apply to textile upholstery fabrics covered by EN 14465.
Rubber- or plastic-coated fabrics - Upholstery fabrics - Classification and methods of test; German version EN 15618:2009
Rubber- or plastic-coated fabrics - Upholstery fabrics - Classification and methods of test.
This European Standard specifies a set of properties relevant to the assessment of upholstery coated fabrics for indoor furniture and the appropriate test methods to determine these properties. It also describes a matrix system to express the material properties of an upholstery fabric.This European Standard applies to upholstery fabrics both in domestic and public use, except when used for the seats of road or railway vehicles, boats or aeroplanes.This European Standard applies to upholstery fabrics with a coating on the wear face.This European Standard does not apply to textile upholstery fabrics covered by EN 14465.
Rubber- or plastic-coated fabrics - Upholstery fabrics - Classification and methods of test (Incorporates Amendment A1: 2012)
This part of ISO 7617 specifies requirements for coated fabrics for upholstered furniture, manufactured by applying to one side of a woven cloth a substantially continuous coating of a suitably plasticized polymer of vinyl chloride, or a copolymer the major constituent of which is vinyl chloride. Such coatings are known as poly(vinyl chloride) (PVC) coatings. The present specification covers two grades (A and B) of PVC-coated woven fabric.
Plastics-coated fabrics for upholstery - Part 2: Specification for PVC-coated woven fabrics
This part of ISO 7617 specifies technical requirements for coated fabrics for upholstered furniture for interior use, obtained by applying to one side of a weft-knitted base cloth a substantially continuous coating of a suitably plasticized polymer of vinyl chloride, or a copolymer the major constituent of which is vinyl chloride. Such coatings are known as poly (vinyl chloride) (PVC) coatings. The present specification covers fabrics coated with solid PVC and also covers two grades with coatings consisting of a layer of expanded PVC.
Plastics-coated fabrics for upholstery - Specification for PVC-coated knitted fabrics
This part of ISO 7617 specifies technical requirements for coated fabrics for upholstered furniture for interior use, obtained by applying to one side of a weft-knitted base cloth a substantially continuous coating of a suitably plasticized polymer of vinyl chloride, or a copolymer the major constituent of which is vinyl chloride. Such coatings are known as poly (vinyl chloride) (PVC) coatings. The present specification covers fabrics coated with solid PVC and also covers two grades with coatings consisting of a layer of expanded PVC.
Plastics-coated fabrics for upholstery - Part 1: Specification for PVC-coated knitted fabrics
This part of ISO 7617 specifies requirements for coated fabrics for upholstered furniture, manufactured by applying to one side of a woven cloth a substan-tially continuous coating of a suitably plasticized polymer of vinyl chloride, or a copolymer the major constituent of which is vinyl chloride. Such coatings are known as polyvinyl chloride (PVC) coatings. The present specification covers two grades (A and B) of PVC-coated woven fabric.
Coated fabrics for upholstery. Specification for PVC coated woven fabrics
Plastics-coated fabrics for upholstery - Part 2: Specification for PVC-coated woven fabrics
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号