680 标准查询与下载
共找到 27 条与 相关的标准，共 2 页
Printed boards. Part 3: Design and use of printed boards
- ICS
- 680
- CCS
- 发布
- 1992
- 实施
Printed boards. Part 9: Specification for flexible multilayer printed boards with through connections
- ICS
- 680
- CCS
- 发布
- 1992
- 实施
Tests on electric cables under fire conditions. Part 2: Test on a single small vertical insulated copper wire or cable
- ICS
- 680
- CCS
- 发布
- 1992
- 实施
Low pressure sodium vapour lamps
- ICS
- 680
- CCS
- 发布
- 1992
- 实施
Printed boards. Part 10: Specification for flex rigid double-sided printed boards with through connections
- ICS
- 680
- CCS
- 发布
- 1992
- 实施
Printed boards. Part 11: Specification for flex rigid multilayer printed boards with through connections
- ICS
- 680
- CCS
- 发布
- 1992
- 实施
Denne standard specificerer dimensionerne for tre gevindh-ler og deres placering med henblik p? montering af b?jle til redskabscomputer i traktorf?rerhuse. Almindeligvis fastsp?ndes b?jlen i to af de angivne huller.
Agriculture. Tractors. Implement operation computer. Mounting holes
- ICS
- 680
- CCS
- 发布
- 1990
- 实施
This International Standard specifies dimensions and general safety requirements for circular saw-blade guards of portable hand-held combustion engine brush-saws for use primarily in forestry. The guard described in this International Standard is not intended for use with grass cutter blades.
Forestry machinery. Portable brush-saws. Saw-blade guard. Dimensions
- ICS
- 680
- CCS
- 发布
- 1986
- 实施
The standard specifies a series of implement wheels with integral hubs for agricultural machines, and the dimensions which are necessary for the attachment of such wheels to agricultural machines.
Machinery for agriculture. Wheels with integral hub
- ICS
- 680
- CCS
- 发布
- 1986
- 实施
This International Standard lays down dimensional charac-teristics and specifies the test pressure of the types of hydraulic tipping cylinders currently used on agricultural tippers, in order to provide a reasonably limited range from which manufac-turers may choose a suitable cylinder to meet current and projected requirements.
Agricultural trailers. Single-acting telescopic tipping cylinders. 25 MPa (250 bar) series. Types 1, 2 and 3. Interchangeability dimensions
- ICS
- 680
- CCS
- 发布
- 1985
- 实施
Denne standard specificerer det frirum, der skal respekteres p? redskaber for at disse kan tilkobles i landbrugstraktorers trepunktsoph?ng. Denne standard omfatter landbrugsredskaber, der tilkobles ved hj?lp af trepunktsoph?ng i overensstemmelse med DS 6010. Den g?lder ogs? for brug af redskabskoblere.
Agricultural tractors and machinery. Connections. Clearance zone for the three-point linkage of implements
- ICS
- 680
- CCS
- 发布
- 1984
- 实施
Denne standard specificerer de n?dvendige dimensioner og frirum for et koblingssystem, hvor tre-punktsoph?ngte landbrugsredskaber tilkobles ved hj?lp af en traktormonteret b?reaksel, der funge-rer som redskabskobler. Denne standard g?lder for traktorer og redskaber med kategori 2 trepunktsoph?ng.
Agricultural machinery. Cross shaft implement coupler, category 2
- ICS
- 680
- CCS
- 发布
- 1984
- 实施
This International Standard specifies the requirements for dimensional compatibility of forage harvesting machines and transport vehicles necessary to ensure satisfactory operation. NOTE — This International Standard makes no claim to cover simple types of flail forage harvesters that normally work in conjunction with agncultural trailers fitted with extension sides. Simple flail forage harvesters are defined as a) mounted or semi-mounted units; b) units without double chop capability; c) units without secondary blowers or other conveying/blowmg devices; d) units requiring tractors of power less than or equal to 50 kW.
Equipment for harvesting. Dimensional compatibility of forage harvesting machinery
- ICS
- 680
- CCS
- 发布
- 1984
- 实施
This International Standard specifies the dimensions and clearances of front hand guards on portable hand-held chain saws.
Forestry machinery. Portable chain saws, front hand guard. Dimensions
- ICS
- 680
- CCS
- 发布
- 1984
- 实施
Denne standard fastl?gger hoveddimensionerne og specificerer det modul?re arrangement samt h?jdeplacering over jordoverfladen af gafler p? baghammel beregnet til fastg?relse af harveled eller lignende. Denne standard omfatter bugseret, let jordbearbejdningsudstyr med et tr?kkraftbehov p? op til 1,2 kN pr. meter arbejdsbredde (ét harveled).
Machinery for agriculture. Trailed units of shallow tillage equipment. Main dimensions and attachment points
- ICS
- 680
- CCS
- 发布
- 1984
- 实施
This International Standard lays down the basis dimensions and the peripheral speed of saw blades for portable hand-held brush saws (see ISO 7112).
Machinery for forestry. Brush saws. Saw blades. Dimensions and peripheral speed
- ICS
- 680
- CCS
- 发布
- 1984
- 实施
This International Standard specifies dimensions of the disc centre plate and fixing holes for fixing the disc to the hub flange in disc trenchers used for soil cultivation in forestry. The design of the disc itself (concavity, cutting edge, teeth etc.) is not included in this International Standard.
Machinery for forestry. Disc trenchers. Disc-to-hub flange fixing dimensions
- ICS
- 680
- CCS
- 发布
- 1983
- 实施
This International Standard specifies the main interchange-ability dimensions for compensator and articulated hydraulic cylinders capable of activating mechanically controlled brakes fixed to the axles of agricultural trailers and trailed equipment. NOTE — The correct operation of the braking unit requires the presence of one or more recall springs.
Agricultural trailers and trailed equipment. Braking cylinders. Specifications
- ICS
- 680
- CCS
- 发布
- 1983
- 实施
Denne standard specificerer — et klassifikationssystem for kraftoverf?ringsaksler; — krav til kraftudtagsnav; — kraftoverf?ringsakslers st?rrelser og l?ngder; — placering af kraftindtagsforbindelser til redskaber beregnet til kraftoverf?ring — frirum
Agricultural machines. Power take-off drive shafts for machines and implements
- ICS
- 680
- CCS
- 发布
- 1983
- 实施
Denne Internationale Standard specificerer arbejdsbredderne ved s?ning, plantning, g?dskning og spr?jtning som en retningslinie for fabrikanter og brugere af disse maskiner. Standarden fastl?gger de sammenh?rende arbejdsbredder for maskiner til s?ning eller plantning og de maskiner, der bruges til f?lgende arbejder.
Agricultural machinery. Equipment for sowing, planting, distributing fertilizers and spraying. Recommended working widths
- ICS
- 680
- CCS
- 发布
- 1982
- 实施
