71.080.50 酐 标准查询与下载

GB/T 3676-2020 工业用顺丁烯二酸酐

本标准规定了工业用顺丁烯二酸酐的要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于以苯或正丁烷为原料经催化氧化制得的顺丁烯二顺酐。 分子式 ：C4H2O3结构式 ： 相对分子质量 ：98.056（按 2016 年国际相对原子质量）

Maleic anhydride for industrial use

GB/T 23967-2017 工业用偏苯三酸酐

Trimellitic Anhydride for industrial use

GB/T 23967-2009 工业用偏苯三酸酐

本标准规定了工业用偏苯三酸酐的要求、试验方法、检验规则以及标志、包装、运输、贮存。 本标准适用于工业用偏苯三酸酐的生产、检验和销售。化学名称：1，2，4-苯三羟酸-1，2-酐 结构式、分子式略

Trimellitic anhydride for industrial use

GB/T 3676-2008 工业用顺丁烯二酸酐

本标准规定了工业用顺丁烯二酸酐的要求、试验方法、检验规则以及标志、包装、运输和贮存等。 本标准适用于以苯或石油碳四馏分为原料经催化氧化制得的顺丁烯二酸酐的生产、检验和销售。该产品主要用作不饱和聚醋树脂、油漆、农药以及医药等的原料。 分子式：CHO 相对分子质量：98.058（按2005年国际相对原子质量）。

Maleic anhydride for industrial use

GB/T 10668-2000 工业乙酸酐

本标准规定了工业乙酸酐的要求、试验方法、检验规则及标志、包装、运输、贮存、安全等。 本标准适用于乙酸裂化法或乙醛氧化法制得的乙酸酐。 该产品主要用于生产醋酸纤维、医药、染料、香料、胶片等产品。

Acetic anhydride for industrial use

GB 3676-1992 顺丁烯二酸酐

本标准规定了工业顺丁烯二酸酐产品的技术要求、试验方法、检验规则及标志、包装、贮存和运输等。 本标准适用于由苯或石油碳四馏分为原料经催化氧化制得的工业顺丁烯二酸酐。其主要用途为不饱和聚酯树脂、油漆、农药以及医药等的原料。 分子式：C4H2O3 相对分子质量：98.058（按1987年国际相对原子质量）

Maleic anhydride

HG/T 6251-2023 工业用2-氯甲基-3,4-二甲氧基吡啶盐酸盐

2-Chloromethyl-3,4-dimethoxypyridine hydrochloride for industrial use

T/CPCIF 0319-2023 偏苯三酸酐副产酸酐混合物

本文件规定了偏苯三酸酐副产酸酐混合物的技术要求、试验方法、检验规则、标签、包装、运输和贮存。

Anhydride mixture by-produced in trimellitic anhydride production

T/ZXJY 010-2023 甲基六氢邻苯二甲酸酐

本文件规定了甲基六氢邻苯二甲酸酐（以下简称甲基六氢苯酐）的分类、技术要求、试验方法、检验规则、标志、包装、运输、贮存。

Methyl hexahydrophthalic anhydride

T/CIEP 010-2022 3,3',4,4'-联苯四甲酸二酐

本文件规定了3,3',4,4'-联苯四甲酸二酐（以下简称“产品”）的要求、试验方法、检验规则和标志、包装、运输、储存。

3,3',4,4'-Biphenyltetracarboxylic dianhydride

T/CIEP 011-2022 3,3',4,4'-二苯醚四甲酸二酐

本文件规定了3,3',4,4'-二苯醚四甲酸二酐（以下简称“产品”）的要求、试验方法、检验规则和标志、包装、运输、储存。

3,3',4,4'-Diphenyl ether tetracarboxylic dianhydride

HG/T 5784-2021 工业用3-氯代苯酐

3-Chlorophthalic anhydride for industrial use

HG/T 5785-2021 工业用4-氯代苯酐

4-Chlorophthalic anhydride for industrial use

T/ZZB 1198-2019 工业用顺丁烯二酸酐

本标准规定了工业用顺丁烯二酸酐的基本要求、技术要求、试验方法、检验规则、标识、包装、运输、贮存和质量承诺。 本标准适用于以正丁烷为原料经催化氧化所制得的工业用顺丁烯二酸酐。 分子式： C4H2O3 结构式： 相对分子质量： 98.056（按2016年国际相对原子质量）。

Maleic anhydride for industrial use

T/SDAS 59-2019 工业用顺丁烯二酸酐

本标准规定了工业用顺丁烯二酸酐的要求、试验方法、检验规则以及标志、包装、运输和贮存等。  本标准适用于以石油碳四馏分为原料经催化氧化制得的顺丁烯二酸酐的生产、检验和销售。该产品主要用作不饱和聚酯树脂、油漆、农药以及医药等的原料。

Maleic anhydride for industrial use

T/HNPCIA 13-2019 丁二酸酐

本标准规定了丁二酸酐的要求、试验方法、检验规则、标识、包装和贮运。

succinic anhydride

ASTM D3366-18 熔融状态和加热后马来酸酐颜色的标准测试方法（铂 - 钴标度）

1.1 This test method covers the determination of the visual measurement of the color of maleic anhydride melt before and after prolonged heating under specified conditions of time and temperature. Color values are expressed in terms of platinumcobalt standards. 1.2 This test method covers the range 0 to 100 color standard numbers. 1.3 In determining the conformance of the test results using this method to applicable specifications, results shall be rounded off in accordance with the rounding-off method of Practice E29. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements see Sections 7, 10.2.1, and 10.4.2. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale)

ASTM D8087-18 使用三色比色法测定熔融状态和加热后马来酸酐的颜色（铂 - 钴标准）的标准试验方法

1.1 This test method covers an instrumental method for the CIE (Commission International de l’Eclairage) tristimulus measurement of the color of maleic anhydride melt before and after prolonged heating under specified conditions of time and temperature. The measurement is converted to color values in the platinum-cobalt system. 1.2 This test method covers the range 0 to100 Pt-Co color. 1.3 In determining the conformance of the test results using this method to applicable specification, results shall be rounded in accordance with the rounding off methods of Practice E29. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Sections 7, 10.3, and 10.6. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale) Using Tristimulus Colorimetry

ABNT NBR 10547 Versão Corrigida-2012 燃料乙醇电导率的测定

This Standard specifies a method for determining the electrical conductivity in hydrous and anhydrous ethanol containing up to three per cent volume/volume (% v/v) of hydrocarbon.

Fuel ethanol - Determination of electrical conductivity

KS M 1707-2008 顺丁烯二酸酐(马来酸酐)

이 표준은 산업용 말레산 무수물(이하, 말레산 무수물이라 한다.)에 대하여 규정한다.

Maleic anhydride for industrial use