71.080.80 醛和酮 标准查询与下载
共找到 220 条与 醛和酮 相关的标准，共 15 页
Amendment No. 1 to Industrial Acetone
- ICS
- 71.080.80
- CCS
- G17
- 发布
- 2017-9-7
- 实施
- 2017-9-7
本标准规定了工业用聚N-乙烯基吡咯烷酮的外观、鉴别、K值、NVP残余单体、水分、固含量、pH值及硫酸盐灰分的检测方法。 本标准适用于N-乙烯基吡咯烷酮(以下简称NVP)单体通过溶液聚合制成的工业用聚N-乙烯基吡咯烷酮(以下简称PVP)线性聚合物。
Determination of 1-vinyl-2-pyrrolidinone homopolymer for industrial use
- ICS
- 71.080.80
- CCS
- G31
- 发布
- 2016-10-13
- 实施
- 2017-05-01 00:00:00.0
1-Vinyl-2-pyrrolidinone homopolymer for industrial use
- ICS
- 71.080.80
- CCS
- G32
- 发布
- 2016-10-13
- 实施
- 2017-05-01
本标准规定了工业用丙酮的要求、试验方法、检验规则、标志、包装、运输、贮运及安全等。本标准适用于异丙苯法和发酵法制得的工业用丙酮。分子式:(CH)CO相对分子质量:58.08(按2007年国际相对原子质量)。
Acetone for industrial use
- ICS
- 71.080.80
- CCS
- G17
- 发布
- 2013-12-31
- 实施
- 2014-08-01
本标准规定了工业用甲醛溶液的要求、试验方法、检验规则、标志、包装、运输、贮存、安全等。本标准适用于由甲醇氧化法制得的工业用甲醛溶液。 分子式：CH0 相对分子质量：30.03(按2007年国际相对原子质量）
Formaldehyde solution for industrial use
- ICS
- 71.080.80
- CCS
- G17
- 发布
- 2011-12-30
- 实施
- 2012-06-01
本标准规定了合成樟脑的定义、外观、性状、等级、要求、试验方法、检验规则、标志、包装、贮存、运输、安全及卫生。 本标准适用于以松节油为原料制得的工业合成樟脑。
Synthetic camphor
- ICS
- 71.080.80
- CCS
- B72
- 发布
- 2007-03-05
- 实施
- 2007-09-01
本标准规定了工业用环已酮的要求、试验方法、检验规则及标志、包装、运输、贮存、安全等。 本标准适用于环已烷氧化法制得的工业用环已酮，该产品主要用于制造尼龙的中间体，作为溶剂和工业原料应用于涂料、树脂及医药等行业。 分子式：C（下标6）H（下标10）O 相对分子质量：98.15（按1997年国际相对原子质量）
Cyclohexanone for industrial use
- ICS
- 71.080.80
- CCS
- G17
- 发布
- 2001-09-06
- 实施
- 2002-04-01
本标准规定了工业甲醛溶液的要求、试验方法、检验规则、标志、包装、运输、贮存、安全等。 本标准适用于由甲醇氧化法制得的工业甲醛溶液。该产品为生产医药、合成纤维、合成树脂、塑料防腐剂及还原剂等的原料。 分子式：HCHO 相对分子质量：30.03（按1995年国际相对原子质量）
Formaldehyde solution for industrial use
- ICS
- 71.080.80
- CCS
- G17
- 发布
- 1998-10-19
- 实施
- 1999-04-01
本标准规定了工业丙酮的要求、试验方法、检验规则、标志、包装、运输、贮存等。 本标准适用于异丙苯法和发酵法制得的丙酮。该产品主要用作有机溶剂及有机合成的原料。 分子式：（CH）CO 相对分子质量：58.08（按1995年国际相对原子质量）
Acetone for industrial use
- ICS
- 71.080.80
- CCS
- G17
- 发布
- 1998-10-19
- 实施
- 1999-04-01
本标准规定了工业糠醛的产品等级、技术要求、检验规则和标志、包装、运输、贮存的方法。 本标准适用于以农林原料通过水解法制取的工业糠醛。 工业糠醛主要用于润滑油精制、糠醇生产、制药以及其他有机合成工业等方面。
Technical furfural
- ICS
- 71.080.80
- CCS
- B72
- 发布
- 1988-12-10
- 实施
- 1989-07-01
本标准规定了GB1926.1第3.2条中所列指标的试验方法，并推荐了硫酸盐测定方法和工业糠醛气相色谱分析法，可分别参考附录B（参考件）和附录C（参考件）。 本标准适用于以农林原料通过水解法制取的工业糠醛。
Technical furfural test methods
- ICS
- 71.080.80
- CCS
- B72
- 发布
- 1988-12-10
- 实施
- 1989-07-01
Amendment No. 1 to Industrial Acetone
- ICS
- 71.080.80
- CCS
- G17
- 发布
- 实施
Standard Test Method for Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine
- ICS
- 71.080.80
- CCS
- 发布
- 2024-01-01
- 实施
项 目 指 标 7-氟-6-氨基-2H-1,4-苯并恶嗪-3(4H)-酮的质量分数/% ≥98.0 干燥减量/% ≤0.5 熔融范围/℃ 265.0 ~ 270.0
7-Fluoro-6-amino-2H-1,4-benzoxazin-3(4H)-one
- ICS
- 71.080.80
- CCS
- C261
- 发布
- 2023-11-13
- 实施
- 2023-11-20
本文件规定了资源综合利用产品环己酮的要求、试验方法、检验规则、标志、包装、运输、贮存和安全。 本文件适用于在以环己烯水合法和环己烷氧化生产环己酮的过程中，反应液经分离出产品后，剩余的含有大量醇酮物质的精馏残渣与苯蒸残液提取出的醇酮物质混合后通过常压精馏、减压精馏的方式可得到环己酮产品，其主要用途是作为工业原料。
Resource comprehensive utilization products Cyclohexanone
- ICS
- 71.080.80
- CCS
- C261
- 发布
- 2023-10-20
- 实施
- 2023-10-27
1.1 This test method covers the determination of the purity of methyl isobutyl ketone (MIBK) by gas chromatography and in addition provides a means for measuring certain impurities such as methyl isobutyl carbinol which are of interest. Impurities such as water and acidity are measured by other appropriate ASTM procedures and the results are used to normalize the chromatographic value. 1.2 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the round-off method of Practice E29 . 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 For specific hazard information and guidance, see the supplier’s Safety Data Sheet for the materials listed in this test method. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography
- ICS
- 71.080.80
- CCS
- 发布
- 2023-08-03
- 实施
1.1 This specification covers isophorone2 (98 % grade) for use in paint, varnish, lacquer, and related products. 1.2 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29 . 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 For specific hazard information and guidance, see the supplier’s Safety Data Sheet for materials listed in this specification. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Specification for Isophorone
- ICS
- 71.080.80
- CCS
- 发布
- 2023-08-03
- 实施
1.1 This test method covers the determination of the acidity of commercially available formaldehyde solutions. 1.2 For purposes of determining conformance of an observed or a calculated value using this test method to relevant specifications, test result(s) shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29 . 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 For hazard information and guidance, see the supplier’s Safety Data Sheet. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 7 . 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Test Method for Acidity of Formaldehyde Solutions
- ICS
- 71.080.80
- CCS
- 发布
- 2023-08-02
- 实施
Standard Test Method for Purity of Methyl Amyl Ketone and Methyl Isoamyl Ketone by Gas Chromatography
- ICS
- 71.080.80
- CCS
- 发布
- 2023-07-01
- 实施
本文件规定了溴代三嗪的技术要求、试验方法、检验规则、标签、包装、运输和贮存。 本文件适用于以苯酚、溴素、三聚氯氰为原料生产的作为阻燃剂使用的溴代三嗪。
Flame retardant chemical— Tri(tribromophenyl) cyanurate for industrial use
- ICS
- 71.080.80
- CCS
- C261
- 发布
- 2023-06-01
- 实施
- 2023-07-01
