共找到 150 条与 相关的标准,共 10 页
本文件描述了搪玻璃平板试件搪玻璃层耐碱性溶液腐蚀性能测定的试验原理,并规定了试剂、试验装置、试样、试验步骤、结果计算和试验报告。 本文件适用于搪玻璃层耐碱性溶液腐蚀性能的测定。
Test method of viterous and porcelain enamels—Part 1:Determination of resistance to alkaline liquids
本文件描述了搪玻璃层耐温差急变性能的试验原理,并规定了试验装置和仪器、试样、试验步骤、结果判定和试验报告。 本文件适用于搪玻璃平板试件搪玻璃层耐温差急变性能的测定。
Test method of viterous and porcelain enamels—Part 3:Determination of resistance to thermal shock
本标准规定了搪玻璃容器的公称容积与公称直径。 本标准适用于搪玻璃容器。
Norminal capacity and diameter of glass-lined equipment
Test method of viterous and porcelain enamels—Part 4:Determination of resistance to impact
Test method of viterous and porcelain enamels—Part 7:Determination of coefficient of mean lincar thermal expansion
Structure,main size and basic parameters of two pieces glass-lined steel vessels with agitator
Structure,main size and basic parameters of one piece glass-lined steel vessels with agitator
GB/T 7991的本部分规定了搪玻璃设备的搪玻璃层高电压试验方法。本部分适用于试验电压不低于2 kV,且搪玻璃层的厚度不小于660 μm的搪玻璃设备的高电压试验。
Test method of viterous and porcelain enamels.Part 6:High voltage test
GB/T7991 的本部分规定了搞玻璃层中铅、锅溶出量的测定方法。 本部分适用于搞玻璃设备挤玻璃层中铅、锅溶出量的测定。
Test method of viterous and porcelain enamels.Part 10:Determination of lead and cadmium release
GB/T7991 的本部分规定了磁性基体上的扩玻璃层厚度的测量方法。 本部分适用于磁性基体擅玻璃设备扩玻璃层厚度的测量。 2 原理
Test method of viterous and porcelain enamels.Part 5:Determination of thickness by electromagnetic method
GB/T 7991的本部分规定了搪玻璃层在室温(10 ℃~35 ℃)条件下的抗拉强度测定的装置、试件、试验步骤、结果计算和试验报告。本部分适用于搪玻璃设备的搪玻璃层在室温(10 ℃~35 ℃)条件下抗拉强度的测定。
Test method of viterous and porcelain enamels.Part 9:Determination of adhesion tensile strength
本标准规定了搪玻璃层耐温差急变性的试验原理、装置和仪器、试样、试验步骤、结果判定和试验报告。本标准适用于搪玻璃平板试件耐温差急变性的规定。
Vitreous and porcelain enamels.Determination of resistance to therml shock
本标准规定了搪玻璃层耐机械冲击性能的试验原理、试验装置、试样、试验步骤、计算公式和试验报告。本标准属于破坏性试验,应用搪玻璃平板试样作为耐机械冲击试验的对象。
Vitreous and porcelain enamels.Determination of resistance to impact
本标准规定了搪玻璃容器的公称容积与公称直径。
Norminal capacity and diameter of glass-lined equipment
本标准规定了搪玻璃平板试件耐碱性溶液腐蚀性能测定的试验装置及方法。本标准适用于搪玻璃釉耐碱性溶液腐蚀性能的测定。
Viterous and porcelain enamels.Determination of resistance to alkaline liquids
本标准规定了扩玻璃平板试件耐酸和中性液体及其蒸气腐蚀性能测定的试验装置及方法。 本标准适用于挤玻璃釉耐酸和中性液体及其蒸气腐蚀性能的测定。
Viterous and porcelain enamels.Determination of resistance to chemical corrosion by boiling acids and their vapours
本标准规定了搪玻璃设备的术语和定义、分类及代号、设计、材料、金属基体的制造、检验和验收、搪玻璃过程要求、搪玻璃件成品质量及技术指标、出厂检验、搪玻璃设备的组装、铭牌、包装、运输等基本要求。 本标准适用于设计温度高于-20℃至200℃的搪玻璃设备及其配件、塔节、管道及管件。
Specification of glass-lined equipment for industry
本标准规定了搪玻璃闭式搅拌容器的术语和定义、基本参数及主要尺寸、型式和技术特性、技术要求及出厂文件、包装、运输和贮存。 本标准适用于内容器设计压力小于或等于1.0MPa,公称容积大于或等于3000L、小于或等于40000L,U型夹套内设计压力小于或等于0.6MPa,内容器及夹套内设计温度高于-20℃~200℃的搪玻璃闭式搅拌容器。
One piece glass-lined steel vessels with agitator
本标准规定了搪玻璃开式搅拌容器的术语和定义、基本参数及主要尺寸、型式和技术特性、技术要求及出厂文件、包装、运输和贮存。 本标准适用于内容器设计压力小于或等于1.0MPa,公称容积大于或等于50L、小于或等于5000L,U型夹套内设计压力小于或等于0.6MPa,内容器及夹套内设计温度高于-20℃~200℃的搪玻璃开式搅拌容器。
Two piece glass-lined steel vessels with agitator
本标准规定了搪玻璃容器的公称容积与公称直径。 本标准适用于搪玻璃容器设备的设计、制造。
Norminal capacity and diameter of glass lined vessel
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号