共找到 47 条与 相关的标准,共 4 页
Crude petroleum and petroleum products -- Determination of water -- Part 2: Potentiometric Karl Fischer titration method
Crude petroleum and petroleum products -- Determination of water -- Part 1: Distillation method
Crude petroleum and petroleum products -- Determination of water -- Part 3: Coulometric Karl Fischer titration method
Crude oil and petroleum products. Guide for use of the measurement tables
Crude petroleum and liquid petroleum products. Laboratory method for determination of density by hydrometer
Crude petroleum and petroleum products -- Determination of density -- Part 2: Hydrometer method
Crude petroleum and petroleum products -- Determination of density -- Part 3: Capillary pyknometer method
Crude petroleum and petroleum products -- Determination of density -- Part 1: Oscillating U-tube method
This Standard prescribes the determination of total sulfur in petroleum and petroleum products that are single-phase and either liquid at ambient conditions, liquefi able with moderate heat, or soluble in hydrocarbon solvents. These materials can include diesel fuel, jet fuel, kerosine, other distillate oil, naphtha, residual oil, lubricating base oil, hydraulic oil, crude oil, unleaded gasoline, gasohol and similar petroleum products.
Petroleum and petroleum products - Determination of sulfur spectrometry X-ray fluorescence (energy dispersive)
Petroleum and petroleum products. Guide for use of the measurement tables
This Standard specifies a method for determining the amount of carbon residue, in the range of 0.01% to 30.0% mass fraction, left afer evaporation and pyrolysis of crude petroleum and petroleum products, according to Conradson method.
Crude petroleum and petroleum products -- Determination of carbon residue -- Part 1: Conradson method
This Standard specifies the measuring method of absolute vapoure at 37.8℃ of volatile and non-viscous petroleum products in accordance with the Reid method.
Crude petroleum and petroleum products -- Determination of vapour pressure -- Part 1: Reid method
This Standard specifies the measuring method of absolute vapoure PRESSURE OF 7 KPa to 150 kPa at 37.8℃ of volatile and non-viscous petroleum products in accordance with the triple expansion method.
Crude petroleum and petroleum products -- Determination of vapour pressure -- Part 2: Triple expansion method
이 표준은 원유 및 석유 제품의 인화점을 측정하는 방법에 대하여 규정한다.
Testing methods for flash point of crude oil and petroleum products-Determination of flash point-Tag closed cup method
이 표준은 21.1 ℃에서부터 98.9 ℃에 이르는 규정된 온도에서 원유 또는 석유 제품의
Testing method for saybolt viscosity of crude oils and petroleum products
この規格は,タグ密閉法引火点試験器を用いて,引火点が93 ℃以下の石油製品及び関連製品の引火点を求める方法について規定する。
Determination of flash point -- Part 1: Tag closed cup method
Crude petroleum and liquid petroleum products. Laboratory hydrometer method for determination of density
이 규격은 1로트의 원유 및 석유 제품의 품질을 알기 위한 대표 시료를 재고품, 적하품 등
Method of sampling crude oil and petroleum products
The document specifies methods for the determination of density or relative density of crude petroleum and of petroleum products handled as liquids. The capillary-stoppered pyknometer is for use with solids and coal tar products. It is not suitable for highly volatible liquids having Reid vapour pressure greater than 50 kPA (0,5 bar) according to ISO 3007 or having an initial point below 40 ? The graduated bicappillary pyknometer method is recommended for all except the more viscous products, and is particularly useful when only small amounts of samples are available.
Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004); German version EN ISO 3838:2004
1.1 This standard specifies methods for the determination of the density or relative density of crude petroleum and of petroleum products handled as liquids. 1.2 The capillary-stoppered pyknometer method is also for use with solids and this may also be used for coal tar products, including road tars, creosote and tar pitches, or for mixtures of these with petroleum products. This method is not suitable for the determination of density or relative density of highly volatile liquids having Reid vapour pressures greater than 50 kPa according to ISO 3007 or having an initial boiling point below 40 °C. 1.3 The graduated bicapillary pyknometer method is recommend
Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号