75.200;91.140.40 标准查询与下载

DS/CEN/TR 13737-1:2012 CEN/TC 234 天然气基础设施制定的功能标准实施指南 第1部分：总则

This part of the Technical Report contains the definition of ""Functional Standardisation"" in the context of CEN/TC 234 and explains their relationship with relevant European Directives, national legislation and national standards. It is intended as a gu

Implementation Guide for functional standards prepared by CEN/TC 234 Gas infrastructure - Part 1: General

ASME B31.8-2012 气体传输与分配管道系统

Gas Transmission and Distribution Piping Systems

ANSI/ASME B31.8S-2012 燃气管道的管理系统完整性

Managing System Integrity of Gas Pipelines

ASME STP-PT-048-2012 ASME B31.8规程用基于可靠度设计和评估的准则

This Criteria Document provides guidance to potential users of the proposed ASME Appendix B31.8R on Reliability Based Design and Assessment (RBDA) by documenting the relevant background information required to fully understand the requirements of the Appendix and to apply them correctly in decision making.

CRITERIA FOR RELIABILITY -BASED DESIGN AND ASSESSMENT FOR ASME B31.8 CODE

ASME STP-PT-049-2012 高强线管温度降额因子的调查

This report reviews the ASME derating factors, identifies the range of line pipe steel grades that may be affected and the potential impacts to ASME pipeline and piping design standards, and makes recommendations for further study or experimental investigation as necessary.

INVESTIGATION OF TEMPERATURE DERATING FACTORS FOR HIGH-STRENGTH LINE PIPE

ASME B31.8S-2012 燃气管道的管理系统完整性

Managing System Integrity of Gas Pipelines

ANSI/ASME B31.8-2012 气体输送和分配管道系统

Gas Transmission and Distribution Piping Systems

ASME B31.8-2010 气体传输与分配管道系统

This Code covers the design, fabrication, installation, inspection, testing, and other safety aspects of operation and maintenance of gas transmission and distribution piping systems, including gas pipelines, gas compressor stations, gas metering and regulation stations, gas mains, and service lines up to the outlet of the customer's meter set assembly. The scope of this Code includes gas transmission and gathering pipelines, including appurtenances, that are installed offshore for the purpose of transporting gas from production facilities to onshore locations; gas storage equipment of the closed pipe type that is fabricated or forged from pipe or fabricated from pipe and fittings; and gas storage lines.

Gas Transmission and Distribution Piping Systems

ASME B31.8S-2010 燃气管道的管理系统完整性

This document applies to on-shore pipeline systems constructed with ferrous materials and that transport gas. This includes all parts of physical facilities through which gas is transported, including pipe, valves, appurtenances attached to pipe, compressor units, metering stations, regulator stations, delivery stations, holders and fabricated assemblies. The principles and processes embodied in integrity management are applicable to all pipeline systems. This Standard is specifically designed to provide the operator with the information necessary to develop and implement an effective integrity management program utilizing proven industry practices and processes. The processes and approaches within this Standard are applicable to the entire pipeline system.

Managing System Integrity of Gas Pipelines

ASME B31.8-2007 气体传输和配油管道系统

This Code covers the design, fabrication, installation, inspection, testing, and other safety aspects of operation and maintenance of gas transmission and distribution systems, including gas pipelines, gas compressor stations, gas metering and regulation stations, gas mains, and service lines up to the outlet of the customer's meter set assembly. The scope of this Code includes gas transmission and gathering pipelines, including appurtenances, that are installed offshore for the purpose of transporting gas from production facilities to onshore locations; gas storage equipment of the closed pipe type that is fabricated or forged from pipe or fabricated from pipe and fittings, and gas storage lines.

Gas Transmission and Distribution Piping Systems

AS 4645:2005 配气网络管理

Specifies the requirements for safe management of a fuel gas distribution network throughout the life cycle of all elements of that network. The requirements apply to the life cycle of new assets in new or existing systems, but the Sections on operations

Gas distribution network management

AS 1697:2005 气体用钢管系统的安装和维护

Specifies materials, design, construction, installation, testing and maintenance requirements for steel piping systems covered by AS 4645, for the distribution of fuel gas suitable for domestic, commercial or industrial uses, where the pressure of the ga

Installation and maintenance of steel pipe systems for gas

AS 5601:2004 气体装置

Specifies requirements for consumer piping, flueing, ventilation and appliance installations which are associated with the use or intended use of fuel gases such as town gas, natural gas, liquefied petroleum gas in the vapour phase, tempered liquefied pe

Gas installations

ASME B31.8S-2004 燃气管道的管理系统完整性

This Standard applies to onshore pipeline systems constructed with ferrous materials and that transport gas. Pipeline system means all parts of physical facilities through which gas is transported, including pipe, valves, appurtenances attached to pipe, compressor units, metering stations, regulator stations, delivery stations, holders, and fabricated assemblies. The principles and processes embodied in integrity management are applicable to all pipeline systems. This Standard is specifically designed to provide the operator (as defined in para. 13) with the information necessary to develop and implement an effective integrity management program utilizing proven industry practices and processes. The processes and approaches within this Standard are applicable to the entire pipeline system.

Managing System Integrity of Gas Pipelines

ASME B31.8-2003 气体传输和分配管道系统

This Code covers the design, fabrication, installation, inspection, and testing of pipeline facilities used for the transportation of gas. This Code also covers safety aspects of the operation and maintenance of those facilities.

Gas Transmission and Distribution Piping Systems

ASME B31.8-2000 气体传输和分配管道系统

Gas Transmission and Distribution Piping Systems

ASME B31.8-1999 气体传送和分配管道系统

Gas transmission and distribution piping systems

AS 5601:2004(CD-ROM) 气体装置（CD－ROM上）

Specifies requirements for consumer piping, flueing, ventilation and appliance installations which are associated with the use or intended use of fuel gases such as town gas, natural gas, liquefied petroleum gas in the vapour phase, tempered liquefied pe

Gas installations on CD-ROM

AS 5601:2002*AG 601:2002 气体装置

Provides requirements for piping and appliance installations that are associated with the use of fuel gases. For metered installations the requirements cover piping systems from the outlet of the billing meter to the inlet of the appliance. For non-meter

Gas installations