77.020 金属生产 标准查询与下载

GB/T 4134-2021 金锭

本文件规定了金锭的要求、检测方法、检验规则标志、包装、运输、贮存、质量证明书和订货单(或合同)。 本文件适用于以各种含金原料生产的金锭。

Gold ingots

GB/T 15512-2009 评价企业节约钢铁材料技术导则

本标准规定了节约钢铁材料的评价原则、评价指标及计算方法、技术要求和管理要求。 本标准适用于钢铁材料的生产、加工、使用、流通和废钢铁回收利用单位。

Technical guides for evaluating the saving of iron and steel product in enterprise

GB 50405-2007 钢铁工业资源综合利用设计规范

本规范适用于钢铁工业的新建、扩建和改建项目的设计。 钢铁工业包括铁矿、锰矿、铬矿采选和烧结、焦化、炼铁、炼钢、轧钢、铁合金、炭素制品、耐火材料、金属制品等工艺及相关配套工艺。

Code for design of comprehensive utilization of iron and steel industry resources

T/CIET 457-2024 氢冶金 氢基竖炉直接还原技术规范

本文件规定了氢基竖炉还原技术的术语和定义、原理与工艺、技术要求、设备与维护等内容。 本文件适用于新建、改扩建钢铁企业氢基竖炉还原技术的设计、运行、管理及设备维护。

Hydrogen metallurgy Technical specifications for hydrogen-based shaft furnace direct reduction

T/QGCML 3998-2024 钛材加工生产技术规范

本文件规定了钛材加工生产技术规范的术语和定义、基本要求、生产过程控制、产成品要求、安全管理、污染物监控。 本文件适用于航空航天用高温钛合金棒材（以下简称“钛材”）的生产和检验活动。

Titanium processing and production technical specifications

T/QGCML 2199-2023 金属制品 热镀锌工艺技术规范

本文件规定了金属制品热镀锌工艺技术的术语和定义、工艺流程、人员要求、镀前要求、镀前处理、热镀作业、质量检验、修复。 本文件适用于金属制品的热镀锌工艺。

Technical specifications for hot-dip galvanizing process for metal products

T/CIET 273-2023 温室气体碳排放量测算方法 电解铝

本文件规定了电解铝企业的温室气体排放量计算的基本原则、核算边界、温室气体排放量计算方法、编制计算报告、质量保证和文件存档、报告内容和格式等内容。 本文件适用于温室气体碳排放量测算方法 电解铝。

Greenhouse Gas Carbon Emission Calculation Method Electrolytic Aluminum

T/CIET 272-2023 产品碳足迹评价导则 电解铝

本文件规定了电解铝产品碳足迹的术语和定义、原则、范围界定、评价流程、核算方法、评价报告等内容。 本文件适用于电解铝产品碳足迹的评价和通报。

Product Carbon Footprint Evaluation Guidelines for Electrolytic Aluminum

T/ZLJYXH 6-2023 钢铁工业覆膜滤袋寿命评估及失效分析

1.基本要求 2.评估项目 3.寿命评估抽样 4.失效分析抽样方法 5.测试步骤 6.检验方法

Guide for life evaluation of coated filter bags in iron and steel industry

T/YNBX 097-2023 再生冰晶石

本文件规定了再生冰晶石的术语和定义、要求、试验方法、检验规则、包装、标识、运输、贮存、质量证明和订货单。  本文件适用于铝电解大修渣、炭渣等危险固体废弃物及其他铝电解固废处置过程中，生产的冰晶石副产品。

Regenerated Cryolite

23/30462529 DC BS EN 14125. 用于加油站地下安装的热塑性和柔性金属管道

BS EN 14125. Thermoplastic and flexible metal pipework for underground installation at petrol filling stations

ASTM D6354-23 铝生产用碳阴极块的抽样计划和核心抽样标准指南

1.1 This guide covers sampling of carbon cathode blocks used in the production of aluminum, and details procedures for taking samples from single cathode blocks. It covers equipment and procedures for obtaining samples from cathode blocks in a manner that does not destroy the cathode block or prevent its subsequent use as originally intended. However, the user must determine the subsequent use of the sampled cathode blocks. Preferred locations for taking samples from single units of cathode blocks are covered in this guide. 1.1.1 Information for sampling of shaped refractory products, in general, is given in ISO 5022. This standard details the statistical basis for sampling plans for acceptance testing of a consignment or lot. Cathode blocks used in the production of aluminum have specific requirements of sampling, and while the statistical basis for sampling given in ISO 5022 applies, further or modified requirements may also apply. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. NOTE 1—The following ASTM standards are noted as sources of useful information: Test Methods C559, C611, C651, C747, C1025, C1039, and C1225. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production

ASTM D6353-23 铝生产用预焙阳极的取样计划和芯取样的标准指南

1.1 This guide covers sampling for prebaked carbon anodes used in the production of aluminum, and details procedures for taking test samples from anode blocks. It covers equipment and procedures for obtaining samples from anode blocks in a manner that does not destroy the block or prevent its subsequent use as originally intended. However, the user must determine the subsequent use of the sampled anode blocks. Preferred locations for taking samples from single units of anodes are covered in this guide. 1.1.1 Information for sampling of shaped refractory products, in general, is given in ISO 5022. This standard details the statistical basis for sampling plans for acceptance testing of a consignment or lot. Anodes used in the production of aluminum have specific requirements for sampling and while the statistical basis for sampling given in ISO 5022 applies, further or modified requirements may also apply. 1.1.2 Information for sampling of anodes for Al-metal production is given in ISO 8007-2. This standard details the statistical basis for sampling plans for acceptance testing of a consignment or lot. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. NOTE 1—The following ASTM standards are noted as sources of useful information: Test Methods D5502, D6120, D6744, and D6745. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production

T/FSAS 72-2023 铝加工深井铸造安全生产管理平台建设指南

本文件提供了铝加工深井铸造安全生产管理平台的术语和定义、系统整体架构、 建设内容、调试及运行维护的建设指导建议。

Guidelines for the construction of safety production management platform for deep well casting of aluminum processing

T/QGCML 868-2023 无烟钢水精炼剂生产技术规范

本标准规定了无烟钢水精炼剂生产技术规范的术语和定义、生产工艺、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于无烟钢水精炼剂的生产及检验。

Technical specification for production of smokeless molten steel refining agent

DB41/T 2409-2023 铝冶炼行业安全生产风险管控与隐患治理规范

Standards for safety production risk management and hidden danger management in aluminum smelting industry

T/CFA 0310021-2023 铸造企业规范条件

本文件规定了铸造企业的建设条件与布局、企业规模、生产工艺、生产装备、质量控制、能源消耗、环境保护、安全生产及职业健康和监督管理。 本文件适用于《国民经济行业分类》中C 3391 黑色金属铸造和 C 3392 有色金属铸造企业（含主机厂内铸造车间）。

Specification conditions for foundry enterprises

T/CFA 0310021-2023 铸造企业规范条件

本文件规定了铸造企业的建设条件与布局、企业规模、生产工艺、生产装备、质量控制、能源消耗、环境保护、安全生产及职业健康和监督管理。 本文件适用于《国民经济行业分类》中C 3391 黑色金属铸造和 C 3392 有色金属铸造企业（含主机厂内铸造车间）。

Specification conditions for foundry enterprises

T/SHDSGY 027-2023 柔性石墨金属缠绕垫片

本文件规定了柔性石墨金属缠绕垫片的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于各种介质的管法兰、压力容器法兰、摩托车、汽车排气管静密封的柔性石墨金属缠绕垫片。

Flexible graphite metal wound gasket

T/CNIA 0191-2023 铜矿石生物堆浸循环过程控制技术规范

本文件规定了铜矿石生物堆浸循环过程控制的设备要求、生产工艺要求及生物堆浸过程取样和检测要求。 本文件适用于可溶性钙镁总含量（质量分数）不大于15%的氧硫混合铜矿石及硫化铜矿石生物堆浸生产。

Technical Specification for Copper Ore Bioheap Leaching Cycle Process Control