77.040.30;77.080.01 标准查询与下载

JIS G 1211-3:2018 钢铁. 碳的测定. 第3部分: 燃烧后红外吸收法

Iron and steel -- Determination of carbon -- Part 3: Infrared absorption method after combustion

JIS G 1215-4:2018 钢铁. 硫的测定. 第4部分: 感应炉中燃烧后的红外吸收法

Iron and steel -- Determination of sulfur -- Part 4: Infrared absorption method after combustion in an induction furnace

JIS G 1217 AMD 1:2017 铁和钢.氯含量的测定方法(修改件1)

Iron and steel -- Methods for determination of chromium content (Amendment 1)

EN ISO 4829-2:2016 钢-总硅含量的测定-还原硅钼酸盐分光光度法第2部分:硅含量0.01%,0.05%(ISO 4829-2:2016)之间

Dieser Teil der ISO 4829 legt ein spektrophotometrisches Verfahren mit reduziertem Molybdatosilicat zur Bestimmung des Gesamtsiliciumanteils in Stahl fest. Dieses Verfahren lässt sich auf Siliciumanteile im Bereich von 0,01 % bis 0,05 % (Massenanteil) in Stählen anwenden.

Steels - Determination of total silicon contents - Reduced molybdosilicate spectrophotometric method - Part 2: Silicon contents between 0@01 % and 0@05 %

EN ISO 4938:2016 钢和铁-镍含量的重量分析法或滴定法测定(ISO 4938:2016)

Diese Internationale Norm legt ein Verfahren zur gravimetrischen oder titrimetrischen Bestimmung des Nickelanteils in Stahl und Eisen fest. Das Verfahren lässt sich auf Nickelanteile im Bereich von 1 % bis 30 % (Massenanteil) Nickel anwenden.

Steel and iron - Determination of nickel content - Gravimetric or titrimetric method

ISO 4939:2016 钢. 镍含量的测定. 丁二酮肟分光光度法

This International Standard specifies a spectrophotometric method for the determination of nickel in steel using dimethylglyoxime. The method is applicable to the determination of nickel mass fractions in the range of 0,10 % and 2,0 %. Cobalt, copper and manganese can cause interferences (see 7.3.2).

Steel - Determination of nickel - Dimethylglyoxime spectrophotometric method

ISO 4938:2016 钢和铁.镍含量的测定.重量法或容量法

Steel and iron - Determination of nickel content - Gravimetric or titrimetric method

ISO 4829-2:2016 钢.全硅量的测定.硅钼蓝分光光度法.第2部分:硅含量在0.01%-0.05%之间

Steels - Determination of total silicon contents - Reduced molybdosilicate spectrophotometric method - Part 2: Silicon contents between 0,01 % and 0,05 %

GOST R ISO 16918-1-2013 钢铁. 感应耦合等离子体质谱法. 第1部分. 锡, 锑, 铈, 铅以及铋含量的测定

Steel and iron. Inductively coupled plasma mass spectrometric method. Part 1. Determination of tin, antimony, cerium, lead and bismuth content

EN 10071:2012 黑色金属材料的化学分析,钢中锰和铁-电势滴定法

This European Standard specifies an electrometric titration method for the determination of manganese in

Chemical analysis of ferrous materials - Determination of manganese in steels and irons - Electrometric titration method

JIS G 1211-3:2011 钢铁.碳含量的测定.第3部分:燃烧后红外吸收法

This Standard specifies the infrared absorption method after combustion among the determination methods of carbon content of iron and steel. This method is applicable to the determination of carbon content (mass fraction) in iron and steel in the range of 0.001 % or over to and including 5.0 %. When using the working curve of reagent or reference solution, it is applicable to the determination in the range of 0.003 % or over to and including 4.5 % in mass fraction.

Iron and steel -- Determination of carbon content -- Part 3: Infrared absorption method after combustion

JIS G 1211-2:2011 钢铁.碳含量的测定.第2部分:燃烧后气体容积法

This Standard specifies the gas volumetric method after combustion among the determination methods of carbon content of iron and steel. This method is applicable to the determination of carbon content (mass fraction) in iron and steel in the range of 0.05 % or over to and including 5.0 %.

Iron and steel -- Determination of carbon content -- Part 2: Gas volumetric method after combustion

JIS G 1211-4:2011 钢铁.碳含量的测定.第4部分:带有预热或者峰值隔离的熔炉内燃烧后的红外吸收法

This Standard specifies the removal of carbon adhered and adsorbed on surface-combustion-infrared absorption method among the determination methods of carbon content of iron and steel. This method is applicable to the determination of carbon content (mass fraction) in iron and steel in the range of 0.000 3 % or over to and including 0.010 %.

Iron and steel -- Determination of carbon content -- Part 4: Infrared absorption method after combustion in a furnace with preheating or peak separating

JIS G 1211-5:2011 钢铁.碳含量的测定.第5部分:非化合碳的测定

This Standard specifies the determination method of non-combined carbon content in iron and steel. This method is applicable to the determination of non-combined carbon content (mass fraction) in the range of 0.3 % or over to and including 3.0 %.

Iron and steel -- Determination of carbon content -- Part 5: Determination of non-combined carbon

JIS G 1256 AMD 1:2010 钢铁.X射线荧光光谱测定分析方法

Iron and steel -- Method for X-ray fluorescence spectrometric analysis (Amendment 1)

ISO 16918-1:2009 铁和钢.用感应耦合等离子质量光谱测定法测定9类元素.第1部分:锡、锑、铈、铅和铋的测定

Steel and iron - Determination of nine elements by the inductively coupled plasma mass spectrometric method - Part 1: Determination of tin, antimony, cerium, lead and bismuth

DIN EN ISO 10720:2007 钢和铁.氮含量的测定.惰性气体流中熔解后热电导法

This International Standard specifies a thermal conductimetric method after fusion under inert gas for the detemination of nitrogen in steel and iron. The method is applicable to nitrogen contents between 0,0008%(m/m) and 0,5%(m/m).

Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (ISO 10720:1997); English version of DIN EN ISO 10720:2007-06

JIS G 1217:2005 铁和钢.氯含量的测定方法

この規格は，鉄及び鋼中のクロム定量方法について規定する。

Iron and steel -- Methods for determination of chromium content

JIS G 1201:2001 钢铁.分析方法通则

この規格は，鉄及び鋼の分析方法並びにニッケルクロム鉄合金の分析方法に共通な事項について規定する。なお，この規格における鉄とは，銑鉄，鋳鉄などを，鋼とは，炭素鋼，低合金鋼，高合金鋼(ステンレス鋼を含む。)などをいう。

Iron and steel -- General rules for analytical methods

GOST 12345-2001 合金钢和高合金钢.含硫量测定法

Настоящий стандарт устанавливает титриметрические методы определения серы: йодид-йодатный и тетраборатный (при массовой доле серы от 0,002%

Alloyed and high-alloyed steels. Methods of sulphur determination