77.040.30;77.120.60 标准查询与下载

JIS H 1111:2014 锌金属制品的化学分析方法

Methods for chemical analysis of zinc metal

JIS H 1113:2014 锌金属的原子发射分光光电分析法

Method for photoelectric emission spectrochemical analysis of zinc metal

DIN EN 12441-11:2006 锌及锌合金.化学分析.第11部分:锌合金中硅的测定.分光光度法

This European Standard specifies a spectrophotometric method for the determination of silicon in zinc alloys. It is applicable to the products specified in EN 1774 and EN 12844. It is suitable for the determination of silicon contents (mass fractions) between 0,01 % and 0,1 %.

Zinc and zinc alloys - Chemical analysis - Part 11: Determination of silicon in zinc alloys - Spectrophotometric method; English version of DIN EN 12441-11:2006-10

BS EN ISO 3815-2:2005 锌和锌合金.用感应耦合等离子体光发射光谱测定法分析

This part of ISO 3815 specifies analytical methods for determining the chemical composition of zinc and zinc alloys in accordance with ISO 301 and ISO 752 by inductively coupled plasma optical emission spectrometry. This part of ISO 3815 includes provisions for preparation of test solutions and calibration solutions for zinc and zinc alloys. The ranges specified for each method can be extended and/or adapted for determinations of low concentrations. This part of ISO 3815 can be applied to other elements (e.g. Ni, Cr and Ti). However, such results will need to be carefully checked by taking into account the interferences, the sensitivity, the resolution and the linearity criteria for each instrument and each wavelength.

Zinc and zinc alloys - Analysis by inductively coupled plasma optical emission spectrometry

DIN EN ISO 3815-2:2005 锌和锌合金.第2部分:用感应耦合等离子体光辐射光谱测定法分析

This ducument specifies analytical methods for determining the chemical composition of zinc and zinc alloys in accordance with ISO 301 and ISO 752 by inductively coupled optical emission spectrometry. This ducument includes provisions for preparation of test solutions and calibration solutions for zinc and zinc alloys. The ranges specified for each method can be extended and/or adapted, for determinations of low concentrations. It can be applied to other elements (e. g. Ni, Cr and Ti). However, such results will need to be carefully checked by taking into account the interferences, the sensivity, the resolution and the linearity criteria for each instrument and each wavelength.#,,#

Zinc and zinc alloys - Part 2: Analysis by inductively coupled plasma optical emission spectrometry (ISO 3815-2:2005); German version EN ISO 3815-2:2005

BS EN ISO 3815-1:2005 锌和锌合金.用光辐射光谱测定法分析固体样品

This part of ISO 3815 specifies analytical methods for determining the chemical composition of zinc and zinc alloys in accordance with ISO 301 and ISO 752 by optical emission spectrometry. This part of ISO 3815 includes recommendations for preparation of test pieces from zinc and zinc alloys.

Zinc and zinc alloys - Analysis of solid samples by optical emission spectrometry

DIN EN ISO 3815-1:2005 锌和锌合金.第1部分:用光辐射光谱测定法分析固体样品

This ducument specifies analytical methods of testing chemical composition of zinc and zinc alloys in accordance with ISO 301 and ISO 752 by optical emission spectrometry. Included are provisions for preparation of test pieces of zinc and zinc alloys.

Zinc and zinc alloys - Part 1: Analysis of solid samples by optical emission spectrometry (ISO 3815-1:2005); German version EN ISO 3815-1:2005

EN ISO 3815-2:2005 锌和锌合金.第2部分:用感应耦合等离子体光辐射光谱测定法分析;代替EN 12019-1997;ISO 3815-2-2005

Zinc and zinc alloys - Part 2: Analysis by inductively coupled plasma optical emission spectrometry

EN ISO 3815-1:2005 锌和锌合金.第1部分:用光发射光谱测定法分析固体样品;代替EN 12019-1997;ISO 3815-1-2005

This part of ISO 3815 specifies analytical methods for determining the chemical composition of zinc and zinc alloys in accordance with ISO 301 and ISO 752 by optical emission spectrometry.This part of ISO 3815 includes recommendations for preparation of test pieces from zinc and zinc alloys.

Zinc and zinc alloys - Part 1: Analysis of solid samples by optical emission spectrometry (ISO 3815-1:2005)

ISO 3815-1:2005 锌和锌合金.第1部分:用光发射光谱测定法分析固体样品

This part of ISO 3815 specifies analytical methods for determining the chemical composition of zinc and zinc alloys in accordance with ISO 301 and ISO 752 by optical emission spectrometry. This part of ISO 3815 includes recommendations for preparation of test pieces from zinc and zinc alloys.

Zinc and zinc alloys - Part 1: Analysis of solid samples by optical emission spectrometry

NF A06-841-7*NF EN 12441-7:2005 锌及锌合金.化学分析.第7部分:锡的测定.萃取后的光焰原子吸收光谱法

Zinc and zinc alloys - Chemical analysis - Part 7 : determination of tin - Flame atomic absorption spectrometric method after extraction.

NF A06-841-9*NF EN 12441-9:2005 锌及锌合金.化学分析.第9部分.锌合金中镍的测定.光焰原子吸收光谱法

Zinc and zinc alloys - Chemical analysis - Part 9 : determination of nickel in zinc alloys - Flame atomic absorption spectrometric method.

DIN EN 12441-10:2005 锌及锌合金.化学分析.第10部分:锌合金中铬和钛的测定.分光光度法

This document specifies a spectrophotometric method for the determination of chromium and titanium in zinc alloys. It is applicable to the products specified in EN 988, EN 1774 and EN 12844. It is suitable for the determination of chromium and titanium contents (mass fractions) between 0,05 % and 0,50 %.#,,#

Zinc and zinc alloys - Chemical analysis - Part 10: Determination of chromium and titanium in zinc alloys - Spectrophotometric method; German version EN 12441-10:2004

DIN EN 12441-9:2005 锌及锌合金.化学分析.第9部分:锌合金中镍的测定.火焰原子吸收光谱法

This document specifies a flame atomic absorption spectrometric method for the determination of nickel in zinc alloys. It is applicable to the products specified in EN 1774 and EN 12844. It is suitable for the determination of nickel contents (mass fractions) between 0,000 5 % and 0,020 %.

Zinc and zinc alloys - Chemical analysis - Part 9: Determination of nickel in zinc alloys - Flame atomic absorption spectrometric method; German version EN 12441-9:2004

DIN EN 12441-8:2005 锌及锌合金.化学分析.第8部分:二级锌中锡的测定.火焰原子吸收光谱法

This European Standard specifies an analytical method for the determination of tin in secondary zinc by atomic absorption spectrometry. It is applicable to the products specified in EN 13283. It is suitable for the determination of tin mass between 0,1 % and 1,0 %.

Zinc and zinc alloys - Chemical analysis - Part 8: Determination of tin in secondary zinc - Flame atomic absorption spectrometric method; German version EN 12441-8:2004

DIN EN 12441-7:2005 锌及锌合金.化学分析.第7部分:锡的测定.萃取后的火焰原子吸收光谱法

Zinc and zinc alloys - Chemical analysis - Part 7: Determination of tin - Flame atomic absorption spectrometric method after extraction; German version EN 12441-7:2004

DIN EN 12441-2:2005 锌及锌合金.化学分析.第2部分:锌合金中镁的测定.火焰原子吸收光谱测定法

This European Standard specifies a flame atomic absorption spectrometric method for the determination of magnesium in zinc alloys. It is applicable to the products specified in EN 1774 and EN 12844. It is suitable for the determination of magnesium contents (mass fractions) between 0,002 % and 0,08 %.

Zinc and zinc alloys - Chemical analysis - Part 2: Determination of magnesium in zinc alloys - Flame atomic absorption spectrometric method; German version EN 12441-2:2001 + A1:2003 + A2:2004

BS EN 12441-7:2005 锌和锌合金.化学分析.锡的测定.萃取后的火焰原子吸收光谱测定法

This document specifies a flame atomic absorption spectrometric method after extraction for the determination of tin in zinc and zinc alloys. It is applicable to the products specified in EN 988, EN 1179, EN 1774 and EN 12844. It is suitable for the determination of tin contents (mass fractions) between 0,000 5 % and 0,005 %.

Zinc and zinc alloys - Chemical analysis - Determination of tin - Flame atomic absorption spectrometric method after extraction

BS EN 12441-10:2005 锌和锌合金.化学分析.锌合金中铬和钛的测定.分光光度法

This document specifies a spectrophotometric method for the determination of chromium and titanium in zinc alloys. It is applicable to the products specified in EN 988, EN 1774 and EN 12844. It is suitable for the determination of chromium and titanium contents (mass fractions) between 0,05 % and 0,50 %.

Zinc and zinc alloys - Chemical analysis - Determination of chromium and titanium in zinc alloys - Spectrophotometric method

BS EN 12441-8:2005 锌和锌合金.化学分析.二级锌中锡的测定.火焰原子吸收光谱测定法

This document specifies a flame atomic absorption spectrometric method for the determination of tin in secondary zinc. It is applicable to the products specified in EN 13283. It is suitable for the determination of tin contents (mass fractions) between 0,1 % and 1,0 %.

Zinc and zinc alloys - Chemical analysis - Detection of tin in secondary zinc - Flame atomic absorption spectrometric method