77.140.75;91.140.80;93.030 标准查询与下载

SANS 6594:2008 铸铁排水管和配件.插口系列

Specifies the characteristics of cast iron drainage pipes and fittings used for the installations of discharge pipes for water and sewage, rain water pipe systems, and ventilation pipe systems.

Cast iron drainage pipes and fittings - Spigot series

DS/EN 1123-2+A1:2007 废水系统用带插口和承口的纵向焊接热浸镀锌钢管的管道和配件 第2部分：尺寸

This standard applies to pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems. It specifies dimensions and tolerances for pipes, fittings, pipe connectors and seals and establishes a system of designations for the different pipe and fitting types that conform to the stated requirements. This standard is only valid in connection with EN 1123-1. This standard does not apply to the marking of products. EN 1123-1 applies to the marking.

Pipes and fittings of longitudinally welded hot-dip galvanized steel tube with spigot and socket for waste water systems - Part 2: Dimensions

DS/EN 1123-1/A1:2005 废水系统用带插口和承插口的纵向焊接热浸镀锌钢管的管道和管件 第1部分：要求、测试和质量控制

This standard specifies requirements, tests and quality control for longitudinally welded, hot-dip galvanized steel pipes and fittings with spigot and socket for use in waste water systems usually operating under gravity or at a low head of pressure. For the purposes of this standard, components are pipes, fittings, joints and seals. This standard is for components used for the discharge of: - domestic waste water; - surface water and; - groundwater. This standard is also for components discharging other waste water (e.g. industrial waste water) as long as it does not damage the components or endanger the safety and health of personnel.

Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control

DS/EN 1123-1:2000 废水系统用带插口和承插口的纵向焊接热浸镀锌钢管的管道和管件 第1部分：要求、测试和质量控制

This standard specifies requirements, tests and quality control for longitudinally welded, hot-dip galvanized steel pipes and fittings with spigot and socket for use in waste water systems usually operating under gravity or at a low head of pressure. For the purposes of this standard, components are pipes, fittings, joints and seals. This standard is for components used for the discharge of: - domestic waste water; - surface water and; - groundwater. This standard is also for components discharging other waste water (e.g. industrial waste water) as long as it does not damage the components or endanger the safety and health of personnel.

Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control

EN 877:1999 建筑物排水用铸铁管和配件及其接头和附件.要求,试验方法和质量保证.合并勘误表2008年1月;修改件A1-2006年10月

This European Standard applies to cast iron pipeline components used forThe construction of discharge systems for buildings and of drains, normally as gravity systems.The range of nominal sizes extends from DN 40 to DN 600 inclusive.This standard specifies the requirements forThe materials, dimensions and tolerances, mechanical properties, appearance, standard coatings for cast iron pipes, fittings and accessories. It also indicates performance requirements for all components, including joints. Quality assurance is covered in an informative annex.It covers pipes, fittings and accessories cast by any foundry process or manufactured by fabrication of cast components, as well asThe corresponding

Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings. Requirements, test methods and quality assurance (Incorporating Corrigendum January 2008; Incorporates Amendment A1: 2006)