79.040;91.080.20 标准查询与下载

DIN EN 14358:2016 木结构. 特征值的计算和验证; 德文版本EN 14358-2016

Timber structures - Calculation and verification of characteristic values; German version EN 14358:2016

BS EN 14358:2016 木结构 特征值的计算和验证

Timber structures. Calculation and verification of characteristic values

NF P21-500-1:2016 木结构.带矩形横截面的强度分级结构木材.第1部分:一般要求

Timber structures - Strength graded structural timber with rectangular cross section - Part 1 : general requirements

DIN 20000-7:2015 结构中建筑产品的应用. 第7部分: 符合DIN EN 15497的结构型指形接合实心木材

Application of construction products in structures - Part 7: Structural finger jointed solid timber according to DIN EN 15497

NF B52-001-1/A2:2015 结构物中木材使用的管理规则.结构物所用法国软木和硬木树种的目测分类.第1部分:大块木材

Le présent amendement est destiné à :- ajouter le Pin à crochets catalan provenant des Pyrénées Catalanes Françaises ;- ajouter l'Amarante, l'Ebène verte (Ipé) et le Yayamadou provenant de la Guyane Française.

Regulations governing the use of timber in structure - Visual classification for the use of french softwood and harwood species in structure - Part 1 : massive wood

NF B52-001-1/A1:2013 结构物中木材使用的管理规则.结构物所用法国软木和硬木树种的目测分类.第1部分:大块木材

Regulations governing the use of timber in structure - Visual classification for the use of french softwood and hardwood species in structures - Part 1: massive wood

NF B52-001-2/A1:2013 结构物中木材使用的管理规则,结构体所用法国软木和硬木树种的目测分类.第2部分:制造木料胶合板BLC和胶合实心板BMR所用的整体木材的替代方法

Regulations governing the use of timber in structures - Visual classification for the use of french softwood and hardwood species in structure - Part 2: alternative method for massive wood used for manufacturing glued laminated timber BLC and glued solid

NF P21-500-2/IN1:2013 木材结构.带矩形截面的强度分级的结构木材.第2部分:机械分级.初始型式试验的附加要求

Timber structures - Strength graded structural timber with rectangular cross section - Part 2: machine grading - additional requirements for initial type testing

NF B52-001-2:2011 结构物中木材使用的管理规则,结构体所用法国软木和硬木树种的目测分类.第2部分:制造木料胶合板BLC和胶合实心板所用的整体木材的替代方法.

Regulations governing the use of timber in structure - Visual classification for the use of French softwood and hardwood species in structures - Part 2 : alternative method for massif wood used for manufacturing glued laminated timber BLC and glued solid

NF B52-001-1:2011 结构物中木材使用的管理规则,结构体所用法国软木和硬木树种的目测分类.第1部分:大块木材.

Regulations governing the use of timber in structure - Visual classification for the use of French softwood and hardwood species in structures - Part 1 : massive wood.

NF P21-500-1/IN1:2011 木结构.带矩形横截面的强度分级结构木材.第1部分:一般要求

Timber structures - Strength graded structural timber with rectangular cross section - Part 1 : general requirements.

DIN EN ISO 8970:2010 木结构.机械紧固件接头的测试.木密度要求(ISO 8970-2010);德文版本EN ISO 8970-2010

Timber structures - Testing of joints made with mechanical fasteners - Requirements for wood density (ISO 8970:2010); German version EN ISO 8970:2010

EN ISO 8970:2010 木结构.机械紧固件接头试验.木材密度要求［代替:CEN EN 28970］

This International Standard specifies a method, based on density, for the selection of pieces of wood used in determining the strength and stiffness properties of connections made with mechanical fasteners.

Timber structures - Testing of joints made with mechanical fasteners - Requirements for wood density (ISO 8970:2010)

ISO 8970:2010 木结构.机械紧固件接头试验.木材密度要求

This International Standard specifies a method, based on density, for the selection of pieces of wood used in determining the strength and stiffness properties of connections made with mechanical fasteners. It is assumed the wood density is normally distributed and that any deviations are reported. This International Standard is applicable only to specimens of wood.

Timber structures - Testing of joints made with mechanical fasteners - Requirements for wood density

ANSI 117-2010 软木材物种的胶合木结构用标准规范

Standard Specifications for Structural Glued Laminated Timber of Softwood Species

SANS 1783-2:2009 软木锯材．第2部分：框架墙施工用应力级结构木材和木料

Specifies requirements for three stress grades of visually graded structural timber and three stress grades of mechanically graded structural timber (including finger-jointed structural timber).

Sawn softwood timber Part 2: Stress-graded structural timber and timber for frame wall construction

SANS 1783-1:2009 软木锯材．第1部分：一般要求

Specifies requirements for visually, mechanically and proof-graded sawn softwood timber, for use as structural timber, brandering and battens, for frame wall construction and for industrial purposes, derived from trees of the genus Pinus grown in Souther

Sawn softwood timber Part 1: General requirements

DS/INSTA 142:2009 木材的北欧视觉强度分级规则

This INSTA Standard identifies the characteristics and defines grading specifications for visual strength grading of sawn timber to be used for load-bearing structural purposes.This INSTA standard fulfills the principles of EN 14081-1 for CE marking.This INSTA covers the species defined in Annex A1 and grown in the geographical areas defined in the same annex. Defined by the dimensions and intended use of the timber, three different sets of requirements are given.They are for:- timber with thickness t >= 45 mm or width b > 75 mm (cf. clause 6.2.2).- timber with thickness 25 mm

Nordic visual strength grading rules for timber

NF B52-001/A1:2009 建筑木材的使用管理规则.建筑物中使用的法式针叶木材和阔叶锯材的目视分类

Regulations governing the use of timber in structure - Visual classification for the use of French coniferous and deciduous sawn timber in structures.

SANS 6122:2008 按照给定标准确认木材等级系统中，固体结构木材及夹层结构木材(胶合层木)的质量测试

Provides for the qualification of testing of grading systems that are used industrially on a continuous basis for the grading of solid and laminated structural timber. Not aplicable to laminated products of specific design, or to products such as plywood

Qualification testing of solid structural timber and laminated structural timber (glulam) for verifying timber grading systems in accordance to a given standard