83.100;93.010 标准查询与下载

NF P75-451*NF EN 14933:2008 土木工程用热绝缘和轻质充填产品.工厂制膨胀性聚苯乙烯(EPS)产品.规范

Thermal insulation and light weight fill products for civil engineering applications - Factory made products of expanded polystyrene (EPS) - Specification.

NF P75-452*NF EN 14934:2008 土木工程用隔热和轻质填装制品.工厂制挤制聚苯乙烯泡沫(XPS)产品.规范.

Thermal insulation and light weigh fill products for civil engineering applications . Factory made products of extruded polystyrene foam (XPS) . Specification.

DIN EN 14934:2007 土木工程用隔热和轻质填装制品.工厂制挤制聚苯乙烯泡沫(XPS)产品.规范

This European Standard specifies the requirements for factory made products of extruded polystyrene foam which are used for frost insulation of roads, railways, trafficked areas, light weight fill for reduction of horizontal and vertical earth pressure and other civil engineering applications. The products are manufactured in the form of boards, which are also available with special edge and surface treatment (tongue & grooves, shiplap etc.). The standard also covers multilayered insulation boards. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. The standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The classes and levels required for a given application are to be found in regulations or non-conflicting standards. For applications where thermal resistance is required, products with a declared thermal resistance lower than 0,25 m. K/W or a declared thermal conductivity greater than 0,060 W/(m. K) are not covered by this standard. This standard does not cover in situ insulation products and products intended to be used for insulation of buildings, of building equipment and industrial installations or products intended for acoustic insulation.

Thermal insulation and light weight fill products for civil engineering applications - Factory made products of extruded polystyrene foam (XPS) - Specification; English version of DIN EN 14934:2007-12

DIN EN 14933:2007 土木工程用隔热和轻质填装制品.工厂制膨胀聚苯乙烯(EPS)产品.规范

This European Standard specifies the requirements for factory made products of expanded polystyrene which are used for frost insulation of roads, railways, trafficked areas, light weight fill for reduction of horizontal and vertical earth pressure and other civil engineering applications. The products are manufactured in the form of boards or blocks. The standard also covers specially cut shaped boards or blocks. The standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. The standard does not specify the required class or level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The classes and levels required for a given application are to be found in regulations or non-conflicting standards. For applications where thermal resistance is required, products with a declared thermal resistance lower than 0,25 m. KNV or a declared thermal conductivity greater than 0,060 W/(m.K) are not covered by this standard. This standard does not cover in situ insulation products and products intended to be used for the insulation of buildings, of building equipment and industrial installations or products intended for acoustic insulation.

Thermal insulation and light weigth fill products for civil engineering applications - Factory made products of expanded polystyrene (EPS) - Specification; English version of DIN EN 14933:2007-12

BS EN 14934:2007 土木工程用隔热和轻质填装制品.工厂制挤压泡沫聚苯乙烯(XPS)产品.规范

This European Standard specifies the requirements for factory made products of extruded polystyrene foam which are used for frost insulation of roads, railways, trafficked areas, light weight fill for reduction of horizontal and vertical earth pressure and other civil engineering applications. The products are manufactured in the form of boards, which are also available with special edge and surface treatment (tongue & grooves, shiplap etc.). The standard also covers multilayered insulation boards. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. The standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The classes and levels required for a given application are to be found in regulations or non-conflicting standards. For applications where thermal resistance is required, products with a declared thermal resistance lower than 0,25 m²⋅K/W or a declared thermal conductivity greater than 0,060 W/(m⋅ K) are not covered by this standard. This standard does not cover in situ insulation products and products intended to be used for insulation of buildings, of building equipment and industrial installations or products intended for acoustic insulation.

Thermal insulation and light weight fill products for civil engineering applications - Factory made products of extruded polystyrene foam (XPS) - Specification

BS EN 14933:2007 土木工程用隔热和轻质填装制品.工厂制膨胀聚苯乙烯(EPS)产品.规范

This European Standard specifies the requirements for factory made products of expanded polystyrene which are used for frost insulation of roads, railways, trafficked areas, light weight fill for reduction of horizontal and vertical earth pressure and other civil engineering applications. The products are manufactured in the form of boards or blocks. The standard also covers specially cut shaped boards or blocks. The standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. The standard does not specify the required class or level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The classes and levels required for a given application are to be found in regulations or non-conflicting standards. For applications where thermal resistance is required, products with a declared thermal resistance lower than 0,25 m²⋅K/W or a declared thermal conductivity greater than 0,060 W/(m⋅K) are not covered by this standard. This standard does not cover in situ insulation products and products intended to be used for the insulation of buildings, of building equipment and industrial installations or products intended for acoustic insulation.

Thermal insulation and light weight fill products for civil engineering applications - Factory made products of expanded polystyrene (EPS) - Specification

EN 14934:2007 土木工程用隔热和轻质填装制品.工厂制挤制聚苯乙烯泡沫(XPS)产品.规范

This European Standard specifies the requirements for factory made products of extruded polystyrene foam which are used for frost insulation of roads, railways, trafficked areas, light weight fill for reduction of horizontal and vertical earth pressure and other civil engineering applications.The products are manufactured inThe form of boards, which are also available with special edge and surface treatment (tongue & grooves, shiplap etc.).The standard also covers multilayered insulation boards.This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling.The standard does not specifyThe required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application.The classes and levels required for a given application are to be found in regulations or non-conflicting standards. For applications whereThermal resistance is required, products with a declaredThermal resistance lower than 0,25 m2K/W or a declaredThermal conductivity greater than 0,060 W/(m K) are not covered byThis standard.This standard does not cover in situ insulation products and products intended to be used for insulation of buildings, of building equipment and industrial installations or products intended for acoustic insulation.

Thermal insulation and light weight fill products for civil engineering applications - Factory made products of extruded polystyrene foam (XPS) - Specification

EN 14933:2007 土木工程用隔热和轻质填装制品.工厂制膨胀聚苯乙烯(EPS)产品.规范

This European Standard specifies the requirements for factory made products of expanded polystyrene which are used for frost insulation of roads, railways, trafficked areas, light weight fill for reduction of horizontal and vertical earth pressure and other civil engineering applications. The products are manufactured in the form of boards or blocks. The standard also covers specially cut shaped boards or blocks. The standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. The standard does not specify the required class or level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The classes and levels required for a given application are to be found in regulations or non-conflicting standards. For applications where thermal resistance is required, products with a declared thermal resistance lower than 0,25 m2K/W or a declared thermal conductivity greater than 0,060 W/(mK) are not covered byThis standard.This standard does not cover in situ insulation products and products intended to be used for the insulation of buildings, of building equipment and industrial installations or products intended for acoustic insulation.

Thermal insulation and light weight fill products for civil engineering applications - Factory made products of expanded polystyrene (EPS) - Specification