83.140.50;91.100.50 标准查询与下载

GB/T 23654-2009 硫化橡胶和热塑性橡胶.建筑用预成型密封条的分类、要求和试验方法

警告：使用本标准的人员应有正规实验室工作的实践经验。本标准并未指出所有可能的安全问题。使用者有责任采取适当的安全和健康措施，并保证符合国家有关规定条件。 本标准规定了建筑物用预成型密封条的分类、性能及密封条本身的一些功能性试验要求及其相关的试验方法。 本标准适用于硫化橡胶和热塑性橡胶制成的预成型密封条，这些预成型密封条包括下列产品： 门窗框内密封条，即，门窗挡风密封条； 玻璃装配密封条； 用于周围填缝密封条； 用于建筑物正面各部分之间的密封条； 用于砖砌墙体之间的密封条。 本标准也适用于设计使用温度在-20℃～+55℃之间和设计使用温度在-40℃～+70℃之间的海绵橡胶制成的上述预成型密封条。

Rubber,vulcanized and thermoplastic.Preformed gaskets used in buildings.Classification,specification and test methods

GB/T 23661-2009 建筑用橡胶结构密封垫

本标准规定了建筑用橡胶结构密封垫要求、试验方法、标志、包装和贮存。 本标准适用于预成型密化硫化的结构密封垫，不适用于建筑用门窗框内密封条和玻璃装配密封条。

Rubber building structural gaskets

BS ISO 5892:2013 建筑橡胶衬垫.预成型密实的硫化结构衬垫材料.规格

Rubber building gaskets. Materials for preformed solid vulcanized structural gaskets. Specification

ISO 5892:2013 建筑橡胶衬垫.预成型密实的硫化结构衬垫材料.规格

This International Standard specifies material requirements for preformed, solid vulcanized rubber structural gaskets in sealing and supporting applications for buildings. NOTE Specifications for non-supporting gaskets are given in ISO 3934.

Rubber building gaskets - Materials for preformed solid vulcanized structural gaskets - Specification

JIS A 5760:2013 建筑用结构密封垫.分类,规格和试验方法

Structural gaskets used in buildings -- Classification, specification and test methods

JIS A 5756:2013 建筑用预成型硫化热塑橡胶垫.分类、规范和试验方法

Performed gaskets used in buildings.Classification, specifications and test methods

NF P85-210-2:2012 建筑工程 - 专用合同 - 使用密封剂的密封接头面 - 第2部分: 特殊管理标准条款合同单.

Building works - Private contacts - Sealing joint front by implementation of sealants - Part 2 : contract bill of special administratives mode clauses.

NF P85-210-1-1:2012 建筑工程 - 使用密封剂的密封接头面 - 第1-1部分: 技术标准条款合同单.

Building works - Sealing joint front by implementation of sealants - Part 1-1 : contract bill of technical model clauses.

NF P85-210-1-2:2012 建筑工程.使用密封剂的密封接头面.第1-2部分:材料选择的通用标准

Building works - Sealing joint front by implementation of sealants - Part 1-2 : general criteria for selection of materials.

ISO 4635:2011 公路混凝土铺筑路段间用橡胶,硫化预制接缝密封.规范

CAUTION — Manufacturers shall ensure that emissions from their products of substances which could be hazardous to health or to the environment are not in excess of the legally permitted level in the country of use. This International Standard specifies requirements for material for preformed vulcanized rubber joint seals used between concrete paving sections of highways. It is applicable to seals for joints in new concrete highways as well as to maintenance work on such highways. It does not cover the design or dimensions of seals, but general requirements for finished seals are given. NOTE This International Standard is based on experience with chloroprene (CR) rubber and ethylene-propylenediene monomer (EPDM) rubber.

Rubber, vulcanized - Preformed joint seals for use between concrete paving sections of highways - Specification

JIS A 5756 AMD 1:2006 建筑衬垫和建筑结构衬垫.门窗玻璃安装和嵌板密封用预成形固态硫化橡胶材料（修改件1）

Building gaskets and Building structural gaskets -- Materials in preformed solid vulcanizates used for sealing glazing and panels (Amendment 1)

HG/T 3099-2004 建筑橡胶密封垫—预成型实心硫化的结构密封垫用材料规范

本标准规定了建筑用预成型实心硫化的橡胶结构密封垫材料的性能要求和试验方法。 本标准详细地阐述了对锁条式密封垫的要求。 本标准不适用于建筑用玻璃窗和镶板的密封条材料。

Rubber building gaskets - Materials for preformed solid vulcanized structural gaskets - Specification

ISO 3934:2002 建筑用预成型硫化热塑橡胶垫.分类、规范和试验方法

This International Standard specifies a system of classification of materials used in preformed gaskets for buildings. It applies to the following products: a) gaskets for use round the inside of door or window casings, i.e. weatherstripping (dynamic gaskets); b) gaskets for glazing (static gaskets); c) gaskets for use round infilling; d) gaskets for use between facade parts; e) gaskets for use between masonry walls. In addition to specifying the characteristics required for the constituent materials, some functional tests on the gaskets themselves are specified. The corresponding test procedures are given in the annexes. This International Standard applies to preformed gaskets made from vulcanized or thermoplastic rubber. It also applies to preformed gaskets made of cellular rubber designed for use at temperatures between - 20 ℃ and + 55 ℃ (thermal conditions category P1 and between - 40 ℃ and + 70 ℃ (thermal conditions category P3) (see clause 4).

Rubber, vulcanized and thermoplastic - Preformed gaskets used in buildings - Classification, specifications and test methods

FD P85-210-3-2002 本文件供法国标准化组织协会(AFNOR SAGAWEB).(在线标准)客户专用和非集体使用.严格禁止所有的网络开发,复制和再传播,无论以哪种形式(硬拷贝或其它媒介),即使只是部分.

This document is intended for the exclusive and non collective use of AFNOR SAGAWEB.(Standards on line) customers. All network exploitation,reproduction and re-dissemination,even partial,whatever the form(hardcopy or other media), is strictly prohibited.

NF P85-210-2:2002 DTU 44.1.建筑工程.专门合同.使用密封剂的密封接头面.第2部分:特殊条款

DTU 44.1 - Building works - Private contracts - Sealing joint front by implementation of sealants - Part 2 : special clauses.

NF P85-210-1:2002 DTU 44.1.建筑工程.使用密封剂的密封接头面.第1部分:技术条款

DTU 44.1 - Building works - Sealing joint front by implementation of sealants - Part 1 : technical clauses.

JIS A 5756:1997 建筑衬垫和建筑结构衬垫.门窗玻璃安装和嵌板密封用预成形固态硫化橡胶材料

この規格は，建築物の構成材(パネル)の目地部及び開ロ部に用いられる建築用ガスケット（以下,ガスケットという)について規定する。 備考1.この規格の中で{}を付けて示してある単位及び数値は，従来単位によるものであって，参考として併記したものである。

Building gaskets and Building structural gaskets -- Materials in preformed solid vulcanizates used for sealing glazing and panels

NF P85-305:1991 填缝产品.水硬型密封填缝腻子.规范

Jointing products. Sealants for water-tight sealing of joints. Specifications.

NF P85-412:1988 填缝料.细木作业的窗扇门扉和横梁之间的密封填料.橡胶材料

JOINTING PRODUCTS. SEALING JOINT BETWEEN CASEMENT AND FRAME FOR WOOD JOINERY. RUBBER-BASED MATERIALS.

NF P85-411:1987 密封填缝用产品.门扉和门框间的剖面.塑性PVC热塑材料

Sealing profiles, joinery products. Profiles between door leaf and door frame. Plasticized PVC thermoplastic material.