83.160 轮胎 标准查询与下载
共找到 245 条与 轮胎 相关的标准，共 17 页
本标准规定了涂覆式刺扎自密封轮胎自密封性能的评价要求和试验方法。本标准适用于胎冠内侧附有涂层并具有刺扎后防漏气功能的充气无内胎轿车子午线轮胎。
Evaluation of self-sealing performance for tyres coated with self-sealing materail
- ICS
- 83.160
- CCS
- G41
- 发布
- 2020-03-06
- 实施
- 2021-02-01
本标准规定了轮胎气门嘴(以下简称气门嘴)的型号标记、结构型式及尺寸规格。 本标准适用于轿车、载重汽车、工业车辆、工程机械、拖拉机与农业、林业机械、摩托车用轮胎的气门嘴，也适用于自行车用轮胎的气门嘴。 本标准不适用于航空轮胎气门嘴。
Tyre valve series
- ICS
- 83.160
- CCS
- G41
- 发布
- 2003-11-10
- 实施
- 2004-06-01
本标准规定了载重汽车轮胎在负荷条件下，测量滚动周长和每单位距离（千米）转数的试验方法。 本标准适用于所有新的载重汽车轮胎。
Test method of measuring rolling circumference for truck tyres
- ICS
- 83.160
- CCS
- G41
- 发布
- 2003-11-10
- 实施
- 2004-06-01
本标准规定了轮胎气门芯（以下简称气门芯）的类型、结构型式、尺寸、技术要求及检验规则。 本标准适用于轿车、载重汽车（包括客车、挂车及无轨电车）、工业车辆、工程机械、拖拉机、农业和林业机械、摩托车及畜力车轮胎用气门芯。 本标准不适用于航空轮胎用气门芯。
Tyre valve core
- ICS
- 83.160
- CCS
- G41
- 发布
- 1996-12-02
- 实施
- 1997-05-01
本标准规定了压配式实心轮胎的规格尺寸、速度与负荷的对应关系。 本标准适用于装在起升车、牵引车和固定平台搬运车等工业车辆上使用的压配式实心轮胎。
Series of pressed-on solid tyres
- ICS
- 83.160
- CCS
- G41
- 发布
- 1996-12-02
- 实施
- 1997-05-01
本标准规定了轮胎专业的一般术语、轮胎分类术语、胎面花纹、轮胎部位和部件、轮辋和轮胎尺寸、轮胎负荷下的尺寸和参数、工艺、轮胎使用条件、轮胎外观缺陷、轮胎翻新和修补、轮胎性能及其测试的术语及定义。 本标准适用于各类轮胎。
Tyre terms
- ICS
- 83.160
- CCS
- G40
- 发布
- 1994-12-22
- 实施
- 1995-10-01
Method of measuring tyre peripheral dimensions
- ICS
- 83.160
- CCS
- G41
- 发布
- 1993-12-30
- 实施
- 1994-10-01
Test method of the physical mechanical properties for pneumatic tyres
- ICS
- 83.160
- CCS
- G41
- 发布
- 1993-12-30
- 实施
- 1994-10-01
本标准规定了翻新用的旧轮胎的选胎技术要求和翻修后的翻新轮胎成品技术要求、试验方法、检验规则及标志。 本标准适用于子午线结构的轿车、载重汽车及其挂车用充气轮胎的翻新。
Retreading and repair of tyres (radial tyres)
- ICS
- 83.160
- CCS
- G41
- 发布
- 1993-09-09
- 实施
- 1994-08-01
This Regulation applies to the approval of vehicles of category M1 up to a maximum mass of 3,500 kg and N1 1 when equipped with a tyre pressure monitoring system, except for vehicles fitted with dual wheels on an axle.
Uniform provisions concerning the approval of vehicles with regard to their Tyre Pressure Monitoring Systems (TPMS)
- ICS
- 83.160
- CCS
- 发布
- 2021-07-01
- 实施
This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense.
TIRES, RIBBED TREAD, PNEUMATIC, AIRCRAFT
- ICS
- 83.160
- CCS
- G41
- 发布
- 2007-02-20
- 实施
The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.
RETREAD TIRES, RIBBED TREAD, PNEUMATIC AIRCRAFT
- ICS
- 83.160
- CCS
- G41
- 发布
- 2007-02-20
- 实施
This specification covers the requirements for a retreaded bias ply or radial ply aircraft tire, which has had a worn casing restored by renewing the tread material or the tread and sidewall material. A rebuilt aircraft pneumatic tire may be a ube-type o
RETREAD TIRES, RIBBED TREAD, PNEUMATIC AIRCRAFT
- ICS
- 83.160
- CCS
- G41
- 发布
- 2007-02-20
- 实施
The activities listed above were interested in this document as of the date of this document. Some organizations and responsibilities can change verification of this currency of the information above by using ASSIST Online database or http://assist.daps
TIRES, RIBBED TREAD, PNEUMATIC, AIRCRAFT
- ICS
- 83.160
- CCS
- G41
- 发布
- 2007-02-20
- 实施
This specification covers requirements for aircraft pneumatic tube type and tubeless ribbed tread tires intended for use on aircraft wheels.
TIRES, RIBBED TREAD, PNEUMATIC, AIRCRAFT
- ICS
- 83.160
- CCS
- G41
- 发布
- 2007-02-20
- 实施
This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the epartment of Defense.
RETREAD TIRES, RIBBED TREAD, PNEUMATIC AIRCRAFT
- ICS
- 83.160
- CCS
- G41
- 发布
- 2007-02-20
- 实施
This Commercial Item Description (CID) covers the general requirements for a commercial, diesel-engine-driven, telescoping mast, container-handling lift truck. The truck will primarily be used to lift, transport, and stack International Standards Organiza
TRUCK, LIFT, TELESCOPING MAST, CONTAINER HANDLER, DIESEL-ENGINEDRIVEN, PNEUMATIC-TIRED, 100,000-POUND CAPACITY
- ICS
- 83.160
- CCS
- G41
- 发布
- 2006-08-02
- 实施
MS27818A, dated 27 September 1993, has been reviewed and determined to be valid for use in acquisition.
TIRE PNEUMATIC RETREAD, TYPE VII 38 X 11 / 14 PR
- ICS
- 83.160
- CCS
- G41
- 发布
- 2006-07-27
- 实施
MS27823A, dated 27 September 1993, has been reviewed and determined to be valid for use in acquisition.
TIRE - PNEUMATIC REBUILT, TYPE VII 20.00-20/26 PR
- ICS
- 83.160
- CCS
- G41
- 发布
- 2006-07-27
- 实施
