91.060.01;91.120.10 标准查询与下载
共找到 12 条与 相关的标准，共 1 页
This document provides the method of calculation of the thermal resistance and thermal transmittance of building components and building elements, excluding doors, windows and other glazed units, curtain walling, components which involve heat transfer to the ground, and components through which air is designed to permeate. The calculation method is based on the appropriate design thermal conductivities or design thermal resistances of the materials and products for the application concerned. The method applies to components and elements consisting of thermally homogeneous layers (which can include air layers). This document also provides an approximate method that can be used for elements containing inhomogeneous layers, including the effect of metal fasteners, by means of a correction term given in Annex F. Other cases where insulation is bridged by metal are outside the scope of this document. NOTE Table 1 in the Introduction shows the relative position of this document within the set of EPB standards in the context of the modular structure as set out in ISO 52000-1.
Building components and building elements - Thermal resistance and thermal transmittance - Calculation methods
- ICS
- 91.060.01;91.120.10
- CCS
- Q70
- 发布
- 2017-06
- 实施
This document specifies the characteristics related to the dynamic thermal behaviour of a complete building component and provides methods for their calculation. It also specifies the information on building materials required for the use of the building component. Since the characteristics depend on the way materials are combined to form building components, this document is not applicable to building materials or to unfinished building components. The definitions given in this document are applicable to any building component. A simplified calculation method is provided for plane components consisting of plane layers of substantially homogeneous building materials. Annex C provides simpler methods for the estimation of the heat capacities in some limited cases. These methods are suitable for the determination of dynamic thermal properties required for the estimation of energy consumption. These approximations are not appropriate, however, for product characterization. NOTE Table 1 in the Introduction shows the relative position of this document within the set of EPB standards in the context of the modular structure as set out in ISO 52000-1.
Thermal performance of building components - Dynamic thermal characteristics - Calculation methods
- ICS
- 91.060.01;91.120.10
- CCS
- Q70
- 发布
- 2017-06
- 实施
이 표준은 문, 창 및 기타 유리 단위체, 지상으로의 열전달에 관련된 부재, 그리고 공기가 통하도록설계된 부재를 제외한 건물 부재와 요소의 열저항과 열투과율의 계산방법을 제시한다.이 계산방법은 응용적 측면에서의 재료와 관련 제품의 적절한 설계 열전도도 및 설계 열저항에 근거한다.이 방법은 열적 균질층(공기층을 포함하는)을 구성하는 부재와 요소에 적용된다.또한 이 표준은 부속서 D에 주어진 보정항을 이용하여, 금속 조임쇠의 효과를 가지고 있는 불균질층을 포함하고 있는 요소에 사용하기에 적절한 방법을 제공한다. 금속에 의한 연결관 단열공간의 경우에는 이 표준의 범주를 벗어난다.
Building components and elements — Thermal resistance and thermal transmittance — Calculation method
- ICS
- 91.060.01;91.120.10
- CCS
- P20
- 发布
- 2013-12-31
- 实施
- 2013/12/31
This International Standard specifies the characteristics related to the dynamic thermal behaviour of a complete building component and provides methods for their calculation. It also specifies the information on building materials required for the use of the building component. Since the characteristics depend on the way materials are combined to form building components, this International Standard is not applicable to building materials or to unfinished building components. The definitions given in this International Standard are applicable to any building component. A simplified calculation method is provided for plane components consisting of plane layers of substantially homogeneous building materials.
Thermal performance of building components - Dynamic thermal characteristics - Calculation methods
- ICS
- 91.060.01;91.120.10
- CCS
- P20
- 发布
- 2008-12-31
- 实施
- 2008-12-31
Thermal performance of building components. Dynamic thermal characteristics. Calculation methods
- ICS
- 91.060.01;91.120.10
- CCS
- 发布
- 2008-12-31
- 实施
- 2008-12-31
Building components and building elements. Thermal resistance and thermal transmittance. Calculation method
- ICS
- 91.060.01;91.120.10
- CCS
- 发布
- 2008-09-30
- 实施
- 2008-09-30
This International Standard provides the method of calculation of the thermal resistance and thermal transmittance of building components and building elements, excluding doors, windows and other glazed units, curtain walling, components which involve heat transfer to the ground, and components through which air is designed to permeate. The calculation method is based on the appropriate design thermal conductivities or design thermal resistances of the materials and products for the application concerned. The method applies to components and elements consisting of thermally homogeneous layers (which can include air layers). This International Standard also provides an approximate method that can be used for elements containing inhomogeneous layers, including the effect of metal fasteners, by means of a correction term given in Annex D. Other cases where insulation is bridged by metal are outside the scope of this International Standard.
Building components and building elements - Thermal resistance and thermal transmittance - Calculation method
- ICS
- 91.060.01;91.120.10
- CCS
- P31
- 发布
- 2008-09-30
- 实施
- 2008-09-30
Thermal performance of building components - Dynamic thermal characteristics - Calculation methods.
- ICS
- 91.060.01;91.120.10
- CCS
- P31
- 发布
- 2008-07-01
- 实施
- 2008-07-18
Building components and building elements - Thermal resistance and thermal transmittance - Calculation method.
- ICS
- 91.060.01;91.120.10
- CCS
- Q70
- 发布
- 2008-06-01
- 实施
- 2008-06-28
This International Standard specifies the characteristics related to the dynamic thermal behaviour of a complete building component and provides methods for their calculation. It also specifies the information on building materials required for the use of the building component. Since the characteristics depend on the way materials are combined to form building components, this International Standard is not applicable to building materials or to unfinished building components. The definitions given in this International Standard are applicable to any building component. A simplified calculation method is provided for plane components consisting of plane layers of substantially homogeneous building materials. Annex A specifies simpler methods for the estimation of the heat capacities in some limited cases. These methods are suitable for the determination of dynamic thermal properties required for the estimation of energy use. These approximations are not appropriate, however, for product characterization. Annex B gives the basic principle and examples of applications of the dynamic thermal characteristics defined in this International Standard. Annex C provides information for programming the calculation method. Annex D gives examples of calculation for a building component.
Thermal performance of building components - Dynamic thermal characteristics - Calculation methods
- ICS
- 91.060.01;91.120.10
- CCS
- Q70
- 发布
- 2007-12
- 实施
This International Standard provides the method of calculation of the thermal resistance and thermal transmittance of building components and building elements, excluding doors, windows and other glazed units, curtain walling, components which involve heat transfer to the ground, and components through which air is designed to permeate. The calculation method is based on the appropriate design thermal conductivities or design thermal resistances of the materials and products for the application concerned. The method applies to components and elements consisting of thermally homogeneous layers (which can include air layers). This International Standard also provides an approximate method that can be used for elements containing inhomogeneous layers, including the effect of metal fasteners, by means of a correction term given in Annex D. Other cases where insulation is bridged by metal are outside the scope of this International Standard.
Building components and building elements - Thermal resistance and thermal transmittance - Calculation method
- ICS
- 91.060.01;91.120.10
- CCS
- Q70
- 发布
- 2007-12
- 实施
This International Standard provides the method of calculation of the thermal resistance and thermaltransmittance of building components and building elements, excluding doors, windows and other glazed units,curtain walling, components which involve heat transfer to the ground, and components through which air isdesigned to permeate.
Building components and building elements - Thermal resistance and thermal transmittance - Calculation method
- ICS
- 91.060.01;91.120.10
- CCS
- 发布
- 2007
- 实施
