共找到 12 条与 相关的标准,共 1 页
이 표준은 3종의 메이슨리 시멘트에 대하여 규정한다.
Masonry cement
Hydraulic binder for non-structural applications - Definition, specifications and conformity criteria.
This European Standard applies to Hydraulic binder for non-structural applications in construction used as binder for preparation of mortar for masonry, rendering and plastering and other non structural construction products. This European Standard specifies the definition and composition of Hydraulic binder for non-structural applications (HB). It includes physical, mechanical and chemical requirements and defines strength classes. EN 15368 also states the conformity criteria and the related rules. Necessary durability requirements are also given. NOTE For normal applications the information given in this standard, and in the masonry specifications, EN 998-1 and EN 998-2, is generally sufficient. However, in special cases, an exchange of additional information between the producer and user can be helpful. The details of such an exchange are not within the scope of this standard but should be dealt with in accordance with national standards or other regulations or can be agreed between the parties concerned. Terms of delivery or other contractual conditions, normally included in documents exchanged between the supplier and the purchaser of Hydraulic binder for non-structural applications, are outside the scope of this European Standard.
Hydraulic binder for non-structural applications. Definition, specifications and conformity criteria
This European Standard applies to Hydraulic binder for non-structural applications in construction used as binder for preparation of mortar for masonry, rendering and plastering and other non structural construction products. This European Standard specifies the definition and composition of Hydraulic binder for non-structural applications (HB). It includes physical, mechanical and chemical requirements and defines strength classes. EN 15368 also states the conformity criteria and the related rules. Necessary durability requirements are also given. NOTE For normal applications the information given in this standard, and in the masonry specifications, EN 998-1 and EN 998-2, is generally sufficient. However, in special cases, an exchange of additional information between the producer and user can be helpful. The details of such an exchange are not within the scope of this standard but should be dealt with in accordance with national standards or other regulations or can be agreed between the parties concerned. Terms of delivery or other contractual conditions, normally included in documents exchanged between the supplier and the purchaser of Hydraulic binder for non-structural applications, are outside the scope of this European Standard.
Hydraulic binder for non-structural applications: definition, specifications and conformity criteria
Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 2: Test methods
This European Standard describes the test methods for binders and composite binders for floor screeds based on calcium sulfate specified in prEN 13454-1. This European Standard describes the test methods for factory made mixtures for floor screeds based on calcium sulfate specified in EN 13813. This European Standard describes reference test methods. If other than these methods and conditions are used, it is necessary to show that they give results equivalent to those given by the reference methods. In the event of a dispute, only the reference test method is used.
Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 2: Test methods (includes Amendment A1:2007); English version of DIN EN 13454-2:2007-11
Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 2 : test methods.
This European Standard describes the test methods for binders and composite binders for floor screeds based on calcium sulfate specified in prEN 13454-1. This European Standard describes the test methods for factory made mixtures for floor screeds based on calcium sulfate specified in EN 13813. This European Standard describes reference test methods. If other than these methods and conditions are used, it is necessary to show that they give results equivalent to those given by the reference methods. In the event of a dispute, only the reference test method is used.
Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 2: Test methods
Binders, composite binders and factory made mixtures or floor screeds based on calcium sulfate - Test methods
This European Standard describes the test methods for binders and composite binders for floor screeds based on calcium sulfate specified in prEN 13454-1. This European Standard describes the test methods for factory made mixtures for floor screeds based on calcium sulfate specified in EN 13813. This European Standard describes reference test methods. If other than these methods and conditions are used, it is necessary to show that they give results equivalent to those given by the reference methods. In the event of a dispute, only the reference test method is used.
Binders,composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 2:Test methods
This European Standard describes the test methods for binders and composite binders for floor screeds based on calcium sulfate specified in prEN 13454-1.This European Standard describes the test methods for factory made mixtures for floor screeds based on calcium sulfate specified in EN 13813.This European Standard describes reference test methods. If other than these methods and conditions are used, it is necessary to show that they give results equivalent to those given by the reference methods. In the event of a dispute, only the reference test method is used.
Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 2: Test methods (Incorporates Amendment A1: 2007)
Schválení ST SEV 826-77 doporu?ilo ministerstvo stavebnictví CSR Zpracovatel: V?zkumn? a v?vojov? ústav maltovin a osinkocemen-tu, Praha 5 - Radotín, pracovi?tě Brno — ing. Richard Pitlík Pracovník ??adu pro normalizaci a mě?ení: Ing. Milena Veselá
Plaster binders. Classification. Common technical requirements. Testing methods
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号