91.100.10;91.180 标准查询与下载



共找到 28 条与 相关的标准,共 2

DTU 25.31 - Building works - Works plaster tiles - Part 1-2 : general criteria for selection of materials

ICS
91.100.10;91.180
CCS
P32
发布
2017-04-22
实施
2017-04-22

Building works - Gypsum plasterboards works - Gypsum wallboards - Part 2: contract bill of special administrative clauses

ICS
91.100.10;91.180
CCS
P04
发布
2012-12-01
实施
2012-12-21

Building works - Gypsum plasterboards works - Gypsum wallboards - Part 1-2 : general criteria for selection of materials

ICS
91.100.10;91.180
CCS
Q62
发布
2012-12-01
实施
2012-12-21

Building works - Gypsum plasterboards works - Gypsum wallboards - Part 1-1 : contract bill of technical model clauses

ICS
91.100.10;91.180
CCS
Q62
发布
2012-12-01
实施
2012-12-21

Building works - Internal insulation and wall linings using gypsum composite panels - Part 2: contract bill of administrative and technical model clauses

ICS
91.100.10;91.180
CCS
P32
发布
2012-12-01
实施
2012-12-28

Building works - Internal insulation and wall linings using gypsum composite panels - Part 1-1 : contract bill of technical model clauses

ICS
91.100.10;91.180
CCS
Q62
发布
2012-12-01
实施
2012-12-28

Building works - Gypsum plasterboards works - Gypsum wallboards - Part 1-1 : contract bill of technical model clauses - Part 1-2 : general criteria for selection of materials - Part 2: contract bill of special administrative clauses

ICS
91.100.10;91.180
CCS
P04
发布
2012-12-01
实施

이 표준은 주로 건축물의 벽, 천장에 사용하는 기초재 및 마감재인 석고 보드 제품에 대하여

Gypsum boards

ICS
91.100.10;91.180
CCS
Q62
发布
2012-11-15
实施
2012-11-15

This Technical Report provides details on the rules and recommendations for the installation of works carried out using fibrous (gypsum) plaster casts as defined in European Standard EN 13815, with instructions and details about construction. Fibrous (gypsum) plaster casts from the three categories of production below (see 4.1 of EN 13815:2006) should be involved inThis Technical Report: a) "cpp" allowing regulatory marking CE, b) "cppv" allowing regulatory marking CE, c) "ipp" either when CE marking is required or without CE marking (see Annex D, note 2 of EN 13815:2006). There are three products: traditional fibrous (gypsum) plaster casts, and two specific products: GRG casts, PMGRG casts. NOTE 1 Construction of traditional gypsum plaster works using screwed system, showing similar provisions with GRG works screwed construction, is not dealt inThis Technical Report. NOTE 2 PMGRG works are not dealt inThis Technical Report. There are three ranges of casts, defined by their principal functions shapes and configurations (see 4.2 of EN 13815:2006): casts for interior architecture, casts for technical functions and units. The equipment, accessories and devices are defined inThis document.This Technical Report applies to both new construction and to the refurbishment, restructuring or conversion of existing buildings. Fibrous plastering work should be capable of having the usual finishes applied directly to them (e. g. paint, wallpaper), subject to the normal preparatory work applicable for the finish.This Technical Report should not apply to: works consisting of various boards, elements or casts when they are not fibrous (gypsum) plaster casts or fibrous plaster works which, by their nature, do not form an integral part of the structure by the use of permanent fixing (see the scope of EN 15319:2007). fibrous plaster works consisting of casts and embellishments, when they are to be applied directly to either new or existing wall or ceiling surfaces, for purely decorative applications (see Figures 3 and 4 of EN 15319:2007); works of these types should be carried out in accordance with standard practice.This Technical Report does not contain the regulatory requirements with which fibrous plaster works (e. g. ceiling) must comply in certain buildings. NOTE 3 In the field of safety, most regulations relate to certain types of building for example: public buildings (PB), high rise buildings (HRB), buildings for educational purposes, buildings for sanitary purposes.This Technical Report does not deal with the ability of fibrous plastering works to comply with particular technical requirements (e. g. fire behaviour, protection against noise, energy economy, etc) needed for the works to comply with the requirements of the particular building contract.

Installation rules of fibrous (gypsum) plaster works

ICS
91.100.10;91.180
CCS
发布
2011-07-01
实施

Building works - Internal gypsum plastering - Part 2 : contract bill of special administrative model clauses.

ICS
91.100.10;91.180
CCS
Q11
发布
2010-11-01
实施
2010-11-27

Building works - Internal gypsum plastering - Part 1-1 : contract bill of technical model clauses.

ICS
91.100.10;91.180
CCS
Q15
发布
2010-11-01
实施
2010-11-27

Building works - Internal gypsum plastering - Part 1-2 : general criteria for selection of materials.

ICS
91.100.10;91.180
CCS
Q27
发布
2010-11-01
实施
2010-11-27

Building works - Gypsum plasterboards works - Part 1-2 : General criteria for selection of materials.

ICS
91.100.10;91.180
CCS
P04
发布
2008-02-01
实施
2008-02-29

Building works - Gypsum plasterboards works - Part 1-1 : contract bill of technical model clauses.

ICS
91.100.10;91.180
CCS
Q62
发布
2008-02-01
实施
2008-02-29

Building works - Gypsum plasterboards works - Part 1-1 : contract bill of technical model clauses - Part 1-2 : General criteria for selection of materials - Part 2 : contract bill of special administrative clauses.

ICS
91.100.10;91.180
CCS
Q62
发布
2008-02-01
实施
2008-02-29

Building works - Gypsum plasterboards works - Part 2 : contract bill of special administrative clauses.

ICS
91.100.10;91.180
CCS
P04
发布
2008-02-01
实施
2008-02-29

This European standard specifies the characteristics and performance of preformed plasterboard cornices intended to be used in building construction works either as part of the original specification or subsequently for improved decorative enrichment of the wall/ceiling angle in rooms.This standard covers the performance characteristics: reaction to fire and flexural strength. This standard covers also additional technical characteristics that are of importance for the use and acceptance of the product by the Construction Industry and the reference tests for these characteristics.It provides for the evaluation of conformity of the product to this European s

Preformed plasterboard cornices - Definitions, requirements and test methods

ICS
91.100.10;91.180
CCS
发布
2007-06-15
实施
2007-06-15

Preformed plasterboard cornices - Definitions, requirements and test methods

ICS
91.100.10;91.180
CCS
发布
2006-03-31
实施
2006-03-31

Preformed plasterboard cornices - Definitions, requirements and test methods.

ICS
91.100.10;91.180
CCS
Q62
发布
2006-03-01
实施
2006-03-05

This European standard specifies the characteristics and performance of preformed plasterboard cornices intended to be used in building construction works either as part of the original specification or subsequently for improved decorative enrichment of the wall/ceiling angle in rooms.This standard covers the performance characteristics: reaction to fire and flexural strength. This standard covers also additional technical characteristics that are of importance for the use and acceptance of the product by the Construction Industry and the reference tests for these characteristics.It provides for the evaluation of conformity of the product to this European s

Preformed plasterboard cornices - Definitions, requirements and test methods

ICS
91.100.10;91.180
CCS
发布
2006-02-27
实施
2006-02-27



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号