91.140.10;91.140.65 标准查询与下载

BS EN 12831-3:2017 建筑物的能源性能 设计热负荷的计算方法 生活热水系统热负荷和需求特征 模块 M8-2、M8-3

Energy performance of buildings. Method for calculation of the design heat load. Domestic hot water systems heat load and characterisation of needs, Module M8-2, M8-3

BS EN 15316-4-1:2017 建筑物能源性能. 系统能源需求和系统效率的计算方法. 空间供暖和DHW生成系统, 燃烧系统(生物质锅炉), 模块M3-8-1, M8-8-1

Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Space heating and DHW generation systems, combustion systems (boilers, biomass), Module M3-8-1, M8-8-1

BS EN 15316-5:2017 建筑物能源性能.系统能源需求和系统效率的计算方法. 空间供暖和DHW储存系统(防止冷却), 模块M3-7, M8-7

Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Space heating and DHW storage systems (not cooling), Module M3-7, M8-7

ANSI Z21.96-2014 便携式燃气热水器标准(同CSA 11.6标准)

Standard for Gas Fired Portable Water Heaters (same as CSA 11.6)

VDI 2077 Blatt 3.2-2013 建筑服务的能源消耗核算 供热和热水供应装置 连接装置的成本分配

This guideline applies to the distribution of costs in heat supply systems. The cost for the energy used by, and for the operation of, heat supply systems must be distributed both independent on consumption and consumption-dependent. The guideline deals with the separation of costs in installations which serve to heat rooms as well as potable water. This guideline is the first standard to offer a method that can be applied to distribute the cost incurred by complex systems. Systems where the cost for energy is billed directly by the energy provider based on an agreed tariff are not covered by this guideline.

Energy consumption accounting for the building services - Heat and hot-water supply installations - Cost allocation in connected installations

ANSI/UL 834-2013 加热、供水和动力锅炉的安全性标准.电气(提案日期 2012年10月26日)

Standard for Safety for Heating, Water Supply, and Power Boilers - Electric (proposal dated 10-26-12)

DS/EN 60335-2-51/A2:2012 家用和类似用途电器 安全 第 2-51 部分：供暖和饮用水装置用固定式循环泵的特殊要求

This Standard deals with the safety of electric stationary circulation pumps for household and similar purposes intended for use in heating systems or in service water systems, their rated voltage being not more than 250 V for single-phase and 480 V for o

Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations

GOST R 54438-2011 燃气集中供暖锅炉.额定热输入不超过70 kW的混合锅炉的生活用水加热器的附加要求

Gas-fired central heating boilers. Additional requirements for the domestic water heaters jointly with boilers of nominal heat input not exceeding 70 kW

DS/EN 60335-2-51/A1:2008 家用和类似用途电器 安全 第 2-51 部分：供暖和饮用水装置用固定式循环泵的特殊要求

Deals with the safety of electric stationary circulation pumps intended for use in heating systems or in service water systems, having a rated power input not exceeding 300 W, their rated voltage being not more than 250 V for single-phase and 480 V for other appliances. Hydraulic and electric parts of the pump may be in the same enclosure, so that the water serves as a coolant, or they maybe seperate. This standard does not apply to pumps for circulating liquids other than water; pumps, other than circulation pumps (EN 60335-2-41); circulation pumps intended exclusively for industrial purposes; circulation pumps intended for locations where special conditio

Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations

DIN EN 15316-3-3:2008 建筑物供热系统.系统能量要求和系统效率的计算方法.第3-3部分:家用热水产生系统

This European Standard is part of a set of standards covering the methods for calculation of system energy requirements and system efficiencies of heating systems in buildings. In particular this standard is one of a number of standards dealing with domestic hot water systems, The scope of this specific part is to standardise the methods for calculation of: thermal losses from the domestic hot water generation system; recoverable thermal losses for space heating from the domestic hot water generation system; -- auxiliary energy of the domestic hot water generation systems. These values are input data for calculation of the overall energy use according to prEN 15603 and EN 15316-1. This European Standard specifies the: -- inputs; -- calculation methods; -- outputs.

Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 3-3: Domestic hot water systems, generation; German version EN 15316-3-3:2007

DIN EN 15316-3-1:2008 建筑物供热系统.系统能量要求和系统效率的计算方法.第3-1部分:家用热水系统要求的特性(出渣要求)

This European Standard is part of a set of standards covering methods for calculation of system energy requirements and system efficiencies of heating systems in buildings. In particular this European Standard is one of a number of standards dealing with domestic hot water systems. The scope of this specific part is to standardise the methods for determining the energy needs for domestic hot water. This European Standard covers the domestic hot water needs in buildings. The calculation of the energy needs for domestic hot water applies to a dwelling, a building or a zone of a building. In order to be coherent with calculation methods for space heating systems, emission losses representing taps and control should be taken into account.

Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 3-1: Domestic hot water systems, characterisation of needs (tapping requirements); German version EN 15316-3-1:2007

DIN EN 15316-3-2:2008 建筑加热系统.系统能量要求和系统效率的计算方法.第3-2部分:生活用热水分配系统

This European Standard is part of a set of standards covering methods for calculation of system energy requirements and system efficiencies of heating systems in buildings. In particular this European Standard is one of a number of standards dealing with domestic hot water systems. The scope of this specific part is to standardise the methods for calculation of: -- thermal losses from the domestic hot water distribution system; -- recoverable thermal losses for space heating from the domestic hot water distribution system; -- auxiliary energy of the domestic hot water distribution system. These values are input data for calculation of the overall energy use according to prEN 15603 and EN 15316-1. This European Standard specifies the: -- inputs; -- calculation methods; -- outputs.

Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 3-2: Domestic hot water systems, distribution; English version of DIN EN 15316-3-2:2008-01

DS/EN 60335-2-51:2006 家用和类似用途电器 安全 第 2-51 部分：供暖和饮用水装置用固定式循环泵的特殊要求

This standard deals with the safety of electric stationary circulation pumps intended for use in heating systems or in service water systems, having a rated power input not exceeding 300 W, their rated voltage is not more than 250 V for single-phase appliances and 480 V for other appliances. NOTE 101 The hydraulic and electrical parts of the pump may be in the same enclosure, so that the water flows through the motor and serves as a coolant, or they may be separated.

Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations

UL 834-2004 电加热、供水和动力锅炉

These requirements cover electric heating, water supply, and power boilers rated at 600 volts or less intended for commercial or industrial applications utilizing hot water or steam. They may also be used for commercial, industrial, or

UL Standard for Safety Heating, Water Supply, and Power Boilers - Electric Fifth Edition; Reprint with Revisions Through and Including March 30, 2006

ONORM H 5195-1-2001 工作温度高达100 ℃的封闭温水加热系统腐蚀和结垢冻害预防

Diese ?NORM soll dazu dienen, Korrosionssch?den und Ablagerungen in geschlossenen Warmwasser-Heizungsanlagen zu verhüten. Diese ?NORM ist für direkt mittels Heizkessel und indirekt mittels Umformer beheizte geschlossene Heizungsanlagen (gem?? ?NORM B 8131) mit Betriebstemperaturen bis maximal 100 °C anzuwenden. Sie wendet sich sowohl an den Planer und den Errichter als auch an den Betreiber. In dieser ?NORM werden Ma?nahmen zur Verhütung von Korrosion und Ablagerungen beschrieben. Werden vom Hersteller der Heizungsanlage oder vom Erzeuger der Komponenten über die Anforderungen dieser ?NORM hinausgehende Festlegungen getroffen, so sind diese einzuhalten.

Prevention of damage by corrosion and scale formation in closed warm-water-heating systems up to 100 ℃ operating tempertures

BS EN 303-6:2000 供暖锅炉.带强制通风燃烧嘴器的供暖锅炉.标称热输入量不超过70kw的用雾化油燃烧炉的组合式锅炉的家用热水供热特定要求

This standard supplements EN 303-1, EN 303-2, EN 303-4 and EN 304/A1 hereafter called boiler standards. It specifies the supplementary requirements and tests for the construction, safety, rational use of energy, fitness for purpose, classification and marking related to the domestic hot water operation of oil-fired combination boilers of nominal heat output not exceeding 70 kW. The domestic hot water is produced on either the instantaneous or storage principle. The domestic hot water production is integrated or coupled, the whole being marketed as a single unit. This standard does not apply to appliances which operate independently of each other - a boiler and a water heater -even if they have a common flue. Neither does the standard apply to a boiler and water storage tank which are not included within the same casing. This standard only covers type testing.

Heating boilers - Heating boilers with forced draught burners - Specific requirements for the domestic hot water operation of combination boilers with atomizing oil burners of nominal heat input not exceeding 70 kW

NF E31-354-6:2000 供暖锅炉.第6部分:带有强制通风燃烧器的供暖锅炉.带有公称热输入功率不超过70kV的自动燃油燃烧器的组合锅炉家用热水供暖操作的特定要求

Heating boilers - Part 6 : heating boilers with forced draught burners - Specific requirements for the domestic hot water operation of combination boilers with atomizing oil burners of nominal heat input not exceeding 70 kW.

DIN EN 303-6:2000 采暖锅炉.第6部分：采用压力通风燃烧器的采暖锅炉.标称输入不超70kW雾化燃油燃烧器分节锅炉家庭热水运行的特定要求

The document specifies the supplementary requirements and tests for the construction, safety, rational use of energy, fitness for purpose, classification and marking related to the domestic hot water operation of combination boilers.

Heating boilers - Part 6: Heating boilers with forced draught burners; specific requirements for the domestic hot water operation of combination boilers with atomizing oil burners of nominal heat input not exceeding 70 kW; German version EN 303-6:2000

EN 303-6:2000 供暖锅炉.第6部分:带强制通风燃烧嘴器的供暖锅炉.额定热输入不超过70kW的雾化油燃烧炉的组合式锅炉的家用热水操作的特殊要求

This standard supplements EN303-1,EN 303-1,EN 303-2,EN 303-4 and EN 304/A1 hereafter called boiler standards.

Heating boilers - Part 6: Heating boilers with forced draught burners - Specific requirements for the domestic hot water operation of combination boilers with atomizing oil burners of nominal heat input not exceeding 70 kW

GOST 11032-1997 家用煤气容积式水加热装置.一般技术条件

Настоящий стандарт распространяется на водонагревательные емкостные газовые бытовые аппараты, предназначенные для децентрализованного

Domestic gas storage water heaters. General specifications