应用于CMM 三坐标测量仪上的粗糙度仪测量

用于CMM三坐标测量仪上的粗糙度测量仪

用于CMM三坐标测量仪上的粗糙度测量系统，mini粗糙度测量仪可适合各种形状的工件，特别适合在线测量。用于CMM的小型的粗糙度测量仪，可大幅度地降低测量。

E PalA v#{_9t!NB0视频: 用于CMM三坐标测量仪上的粗糙度测量仪分析测试百科网CDb3yW0\k)huW

Profile and Roughness measurement on a Coordinate Measuring Machine

Roughness measurement with a CMM

This BMT MiniProfiler roughness measurement system in combination with the CMM manipulator arm supplements a CMM with a universal roughness measurement system.分析测试百科网n1_O*j.oD8C0M
The manipulator arm together with the MiniProfiler roughness measurement system is an分析测试百科网{.W@|+_tni0A
exchangeable system and is stored in the CMM magazine like the conventional probes. It has its own processor and enables to position the stylus in the most important spatial orientations at the workpiece.
}0LY$R5I'u0The data transfer for the positioning commands and the measurement data transfer are done in a wireless mode. Therefore any CMM can be supplemented by this system.分析测试百科网Z)|%u%_ E3gq Q
Workpiece specific adapters enable the skidless roughness measurement even at slanted workpiece contours and inside holes.accumulator is being charged.分析测试百科网}L}!|ixyfd
Due to the extremely small measurement loop the system is immune to external vibrations. The measurement parameters are set inside the original CMM program and the roughness tester is handled like conventional probes. The stylus can be exchanged by the user. Preferably the control of the roughness tester as well as the data evaluation is done via the operating surface of the CMM.