1 | GB/T 208-2014 | 水泥密度测定方法 | Standard test method for cement density | 英文 |
2 | GB/T 222-2006 | 钢的成品化学成分允许偏差 | Permissible tolerances for chemical composition of steel products | 英文 |
3 | GB/T 271-2017 | 滚动轴承 分类 | Rolling bearings — Classification | 英文 |
4 | GB/T 304.1-2017 | 关节轴承 分类 | Spherical plain bearings — Classification | 英文 |
5 | GB/T 307.3-2017 | 滚动轴承 通用技术规则 | Rolling bearings — General technical regulations | 英文 |
6 | GB/T 802.1-2008 | 组合式盖形螺母 | Acorn nuts-Assembling type | 英文 |
7 | GB/T 802.3-2009 | 六角法兰面盖形螺母 焊接型 | Acorn hexagon nuts with flange — Welding type | 英文 |
8 | GB/T 802.4-2009 | 六角低球面盖形螺母 焊接型 | Hexagon cap nuts — Welding type | 英文 |
9 | GB/T 802.5-2009 | 非金属嵌件六角锁紧盖形螺母 焊接型 | Prevailing torque type hexagon acorn nuts with non-metallic insert — Welding type | 英文 |
10 | GB 1103.1-2023 | 棉花 第1部分:锯齿加工细绒棉 | Cotton — Part 1:Saw ginned upland cotton | 英文 |
11 | GB/T 1345-2005 | 水泥细度检验方法 筛析法 | The test sieving method for fineness of cement | 英文 |
12 | GB/T 1499.2-2018 | 钢筋混凝土用钢 第2部分:热轧带肋钢筋 | Steel for the reinforcement of concrete — Part 2:Hot rolled ribbed bars | 英文 |
13 | GB/T 1912-2018 | 字典纸 | Bible paper | 英文 |
14 | GB/T 2275-2017 | 镁砖和镁铝砖 | Magnesia and magnesia-alumina bricks | 英文 |
15 | GB/T 2518-2008 | 连续热镀锌钢板及钢带 | Continuously hot-dip zinc-coated steel sheet and strip | 英文 |
16 | GB/T 2523-2022 | 冷轧金属薄板和薄带表面粗糙度、峰值数和波纹度测量方法 | Measuring method of surface roughness, peak count and waviness for cold-rolled metal sheet and strip | 英文 |
17 | GB/T 2688-2012 | 滑动轴承 粉末冶金轴承技术条件 | Plain bearings — Technical specification for powder metallurgy bearings | 英文 |
18 | GB/T 2938-2008 | 低热微膨胀水泥 | Low heat expansive cement | 英文 |
19 | GB/T 3003-2017 | 耐火纤维及制品 | Refractory fibres and the products | 英文 |
20 | GB/T 3098.22-2009 | 紧固件机械性能 细晶非调质钢螺栓、螺钉和螺柱 | Mechanical properties of fasteners made of the fine grain non-heat treatment steel — Bolts, screws and studs | 英文 |
21 | GB/T 3183-2017 | 砌筑水泥 | Masonry cement | 英文 |
22 | GB/T 3326-2016 | 家具 桌、椅、凳类主要尺寸 | Furniture — Main sizes of tables, chairs and stools | 英文 |
23 | GB/T 3327-2016 | 家具 柜类主要尺寸 | Furniture — Main sizes of storage units | 英文 |
24 | GB/T 3328-2016 | 家具 床类主要尺寸 | Furniture — Main sizes of beds | 英文 |
25 | GB/T 3830-2008 | 软聚氯乙烯压延薄膜和片材 | Calendered film and sheet from flexible polyvinyl chloride | 英文 |
26 | GB/T 3903.6-2017 | 鞋类 整鞋试验方法 防滑性能 | Footwear — Test methods for whole shoe — Slip performance | 英文 |
27 | GB 4053.1-2009 | 固定式钢梯及平台安全要求 第1部分:钢直梯 | Safety requirements for fixed steel ladders and platform — Part 1:Steel vertical ladders | 英文 |
28 | GB 4053.2-2009 | 固定式钢梯及平台安全要求 第2部分:钢斜梯 | Safety requirements for fixed steel ladders and platform — Part 2:Steel inclined ladders | 英文 |
29 | GB 4053.3-2009 | 固定式钢梯及平台安全要求 第3部分:工业防护栏杆及钢平台 | Safety requirements for fixed steel ladders and platform — Part 3:Industrial guardrails and steel platform | 英文 |
30 | GB/T 4240-2019 | 不锈钢丝 | Stainless steel wires | 英文 |
31 | GB/T 4356-2016 | 不锈钢盘条 | Stainless steel wire rods | 英文 |
32 | GB/T 4549.10-2004 | 铁道车辆词汇 第10部分:客车附属设备 | Rail vehicle vocabulary — Part 10:Equipment attached to the passenger car | 英文 |
33 | GB/T 4549.4-2004 | 铁道车辆词汇 第4部分:车钩缓冲及风挡装置 | Railway vehicle vocabulary — Part 4:Coupler& draft gear and vestibule diaphragm | 英文 |
34 | GB/T 4549.5-2004 | 铁道车辆词汇 第5部分:车体 | Railway vehicle vocabulary — Part 5:Car body | 英文 |
35 | GB/T 4549.6-2004 | 铁道车辆词汇 第6部分:门、窗及其开闭装置 | Railway vehicle vocabulary — Part 6:Door, windows and their operating devices | 英文 |
36 | GB/T 4549.7-2004 | 铁道车辆词汇 第7部分:采暖、通风及空气调节装置 | Railway vehicle vocabulary — Part 7:Heating, ventilation and air conditioning equipment | 英文 |
37 | GB/T 4549.8-2004 | 铁道车辆词汇 第8部分:给水、排水装置 | Railway vehicle vocabulary — Part 8:Water supply and drainage equipment | 英文 |
38 | GB/T 4549.9-2004 | 铁道车辆词汇 第9部分:电气装置 | Railway vehicle vocabulary — Part 9:Electric equipment | 英文 |
39 | GB/T 5155-2022 | 镁及镁合金热挤压棒材 | Magnesium and magnesium alloy extruded rods | 英文 |
40 | GB/T 5156-2022 | 镁及镁合金热挤压型材 | Magnesium and magnesium alloy extruded profiles | 英文 |
41 | GB/T 5213-2008 | 冷轧低碳钢板及钢带 | Cold rolled low carbon steel sheet and strip | 英文 |
42 | GB/T 5463.2-2013 | 非金属矿产品词汇 第2部分:滑石 | Non metallic mineral products vocabulary — Part 2:Talc | 英文 |
43 | GB/T 5463.3-2013 | 非金属矿产品词汇 第3部分:石膏 | Non metallic mineral products vocabulary — Part 3:Gypsum | 英文 |
44 | GB/T 5502-2018 | 粮油检验 大米加工精度检验 | Inspection of grain and oils — Determination of milling degree of rice | 英文 |
45 | GB/T 5836.1-2018 | 建筑排水用硬聚氯乙烯(PVC-U)管材 | Unplasticized poly (vinyl chloride) (PVC-U) pipes for soil and waste discharge inside buildings | 英文 |
46 | GB/T 5836.2-2018 | 建筑排水用硬聚氯乙烯(PVC-U)管件 | Unplasticized poly(vinyl chloride) (PVC-U) fittings for soil and waste discharge inside buildings | 英文 |
47 | GB/T 5894-2015 | 机械密封名词术语 | Terminology of mechanical seal | 英文 |
48 | GB/T 6730.30-2017 | 铁矿石 铬含量的测定 二苯基碳酰二肼分光光度法 | Iron ores — Determination of chromium content — Diphenyl carbazide spectrophotometric method | 英文 |
49 | GB/T 6730.34-2017 | 铁矿石 锡含量的测定 邻苯二酚紫-溴化十六烷基三甲胺分光光度法 | Iron ores — Determination of tin content — Pyrocatechol violet cetyl trimet hylamine bromide spectrophotometric method | 英文 |
50 | GB/T 6730.38-2017 | 铁矿石 钴含量的测定 亚硝基-R盐分光光度法 | Iron ores — Determination of cobalt content — Nltroso-R salt spectrophotometric method | 英文 |
51 | GB/T 6730.42-2017 | 铁矿石 铅含量的测定 双硫腙分光光度法 | Iron ores — Determination of lead content — Dithizone spectrophotometric method | 英文 |
52 | GB/T 6730.44-2017 | 铁矿石 锌含量的测定 1-(2-吡啶偶氮)-2-萘酚分光光度法 | Iron ores — Determination of zinc content — 1-(2-pyridylazo)-2-naphthol spectrophotometric method | 英文 |
53 | GB/T 6730.47-2017 | 铁矿石 铌含量的测定 氯代磺酚S分光光度法 | Iron ores — Determination of niobium content — Sulfochlorophenol S spectrophotometric method | 英文 |
54 | GB/T 6730.7-2016 | 铁矿石 金属铁含量的测定 磺基水杨酸分光光度法 | Iron ores — Determination of metallic iron content — Sulfosalicylic acid spectrophotometric method | 英文 |
55 | GB/T 6730.8-2016 | 铁矿石 亚铁含量的测定 重铬酸钾滴定法 | Iron ores — Determination of iron(II) content — Potassium dichromate titrimetric method | 英文 |
56 | GB 7059-2007 | 便携式木折梯安全要求 | Safety requirements for portable wood ladders | 英文 |
57 | GB/T 7106-2019 | 建筑外门窗气密、水密、抗风压性能检测方法 | Test method of air permeability, watertightness, wind load resistance performance for curtain walls | 英文 |
58 | GB/T 7935-2005 | 液压元件 通用技术条件 | Hydraulic fluid power — General requirements for hydraulic components | 英文 |
59 | GB/T 7941-2019 | 制冷试验装置 | Refrigeration test system | 英文 |
60 | GB/T 7991.4-2019 | 搪玻璃层试验方法 第4部分:耐机械冲击性能的测定 | Test method of vitreous and porcelain enamels — Part 4:Determination of resistance to impact | 英文 |
61 | GB/T 7994.1-2014 | 搪玻璃设备试验方法 第1部分:水压试验 | Test method of glass-lined equipments — Part 1:Hydraulic pressure test | 英文 |
62 | GB/T 7994.2-2014 | 搪玻璃设备试验方法 第2部分:气密性试验 | Test method of glass-lined equipment — Part 2:Gas leak test | 英文 |
63 | GB/T 8075-2017 | 混凝土外加剂术语 | Terms of concrete admixtures | 英文 |
64 | GB/T 8145-2021 | 脂松香 | Gum rosin | 英文 |
65 | GB/T 8484-2020 | 建筑外门窗保温性能检测方法 | Test method for thermal insulating performance for building exterior doors and windows | 英文 |
66 | GB/T 8487-2010 | 港口装卸术语 | Terms for cargo handling in port | 英文 |
67 | GB/T 8873-2008 | 粮油名词术语 油脂工业 | Terminology of grain and oils — Oils and fats industry | 英文 |
68 | GB/T 8948-2008 | 聚氯乙烯人造革 | Polyvinyl chloride artificial leather | 英文 |
69 | GB/T 9967-2010 | 金属钕 | Neodymium metal | 英文 |
70 | GB 10409-2019 | 防盗保险柜(箱) | Burglary-resistant safes | 英文 |
71 | GB 10493-2018 | 铁路站内道口信号设备技术条件 | Technical specification for crossing signal equipment within the station | 英文 |
72 | GB 10494-2018 | 铁路区间道口信号设备技术条件 | Technical specification for crossing signal equipment in wayside | 英文 |
73 | GB/T 10592-2008 | 高低温试验箱技术条件 | Specifications for low/high temperature test chambers | 英文 |
74 | GB/T 11263-2017 | 热轧H型钢和剖分T型钢 | Hot rolled H and cut T section steel | 英文 |
75 | GB/T 12690.3-2015 | 稀土金属及其氧化物中非稀土杂质化学分析方法 第3部分:稀土氧化物中水分量的测定 重量法 | Chemical analysis methods for non-rare earth impurity of rare earth metals and their oxides — Part 3:Determination of water content of rare earth oxides — Gravimetric method | 英文 |
76 | GB/T 12754-2006 | 彩色涂层钢板及钢带 | Prepainted steel sheet and strip | 英文 |
77 | GB 12899-2018 | 手持式金属探测器通用技术规范 | General specification for hand-held metal detector | 英文 |
78 | GB/T 13302-1991 | 钢中石墨碳显微评定方法 | Steel — Determination of area content of graphite-micrographic method using diagrams | 英文 |
79 | GB/T 13748.20-2009 | 镁及镁合金化学分析方法 第20部分:ICP-AES测定元素含量 | Chemical analysis methods of magnesium and magnesium alloys — Part 20:Determination of elements by inductively coupled plasma atomic emission spectrometry | 英文 |
80 | GB/T 13748.21-2009 | 镁及镁合金化学分析方法 第21部分:光电直读原子发射光谱分析方法测定元素含量 | Chemical analysis methods of magnesium and magnesium alloys — Part 21:Determination of elements by photoelectric direct reading atomic emission spectrometry | 英文 |
81 | GB/T 13763-2010 | 土工合成材料 梯形法撕破强力的测定 | Geosynthetics — Determination of trapezoid tearing force | 英文 |
82 | GB/T 13788-2017 | 冷轧带肋钢筋 | Cold rolled ribbed steel bars | 英文 |
83 | GB/T 14404-2011 | 剪板机 精度 | Plate shear — Testing of the accuracy | 英文 |
84 | GB/T 14514-2013 | 气动管接头试验方法 | Test methods of pneumatic fluid power connectors | 英文 |
85 | GB/T 14598.302-2016 | 弧光保护装置技术要求 | Specification for arc flash protection equipment | 英文 |
86 | GB/T 14979-1994 | 钢的共晶碳化物不均匀度评定法 | Eutectic carbide of steel--Micrographic method using standard diagrams | 英文 |
87 | GB/T 15072.1-2008 | 贵金属合金化学分析方法 金、铂、钯合金中金量的测定 硫酸亚铁电位滴定法 | Test method of precious alloys-Determination of gold content for gold, platinum and palladium alloys-Potentiometric titration using ferrous sulfate | 英文 |
88 | GB/T 15072.12-2008 | 贵金属合金化学分析方法 银合金中钒量的测定 过氧化氢分光光度法 | Test method of precious metal alloys — Determination of nickel contents for silver alloys — Hydrogen peroxide spectrophotometry | 英文 |
89 | GB/T 15072.13-2008 | 贵金属合金化学分析方法 银合金中锡、铈和镧量的测定 电感耦合等离子体原子发射光谱法 | Test method of precious metal alloys — Determination of tin , cerium and lanthanium contents for silver alloys — Inductively coupled clasma atomic emission spectrometry | 英文 |
90 | GB/T 15072.14-2008 | 贵金属合金化学分析方法 银合金中铝和镍量的测定 电感耦合等离子体原子发射光谱法 | Test method of precious metal alloys — Determination of aluminium and nickel contents for silver alloys — Inductively coupled plasma atomic emission spectrometry | 英文 |
91 | GB/T 15072.15-2008 | 贵金属合金化学分析方法 金、银、钯合金中镍、锌和锰量的测定 电感耦合等离子体原子发射光谱法 | Test method of precious metal alloys — Determination of nickel, zinc and manganese contents for gold, silver and palladium alloys — Inductively coupled plasma atomic emission spectrometry | 英文 |
92 | GB/T 15072.17-2008 | 贵金属合金化学分析方法 铂合金中钨量的测定 三氧化钨重量法 | Test method of precious metal alloys — Determination of tungsten contents for platinum alloys — Tungstic acid gravimetry | 英文 |
93 | GB/T 15072.2-2008 | 贵金属合金化学分析方法 银合金中银量的测定 氯化钠电位滴定法 | Test method of precious metal alloys — Determination of silver contents for silver alloys — Potentionmeter titration with sodium chloride | 英文 |
94 | GB/T 15072.4-2008 | 贵金属合金化学分析方法 钯、银合金中钯量的测定 二甲基乙二醛肟重量法 | Test method of precious metal alloys — Determination of palladium content for palladium and silver alloys — Butanedione dioxime gravimetry | 英文 |
95 | GB/T 15072.5-2008 | 贵金属合金化学分析方法 金、钯合金中银量的测定 碘化钾电位滴定法 | Test method of precious metal alloys — Determination of silver content for gold and palladium alloys — Potentionmeter titration with potassium iodide | 英文 |
96 | GB/T 15072.7-2008 | 贵金属合金化学分析方法 金合金中铬和铁量的测定 电感耦合等离子体原子发射光谱法 | Test methods of precious metal alloys — Determination of chromium and iron contents for gold alloys — Inductively coupled plasma atomic emission spectrometry | 英文 |
97 | GB 15208.1-2018 | 微剂量X射线安全检查设备 第1部分:通用技术要求 | Micro-dose X-ray security inspection system — Part 1:General technical requirements | 英文 |
98 | GB 15208.2-2018 | 微剂量X射线安全检查设备 第2部分:透射式行包安全检查设备 | Micro-dose X-ray security inspection system — Part 2:Transmission baggage security inspection system | 英文 |
99 | GB 15208.3-2018 | 微剂量X射线安全检查设备 第3部分:透射式货物安全检查设备 | Micro-dose X-ray security inspection system — Part 3:Transmission cargo security inspection system | 英文 |
100 | GB 15208.4-2018 | 微剂量X射线安全检查设备 第4部分:人体安全检查设备 | Micro-dose X-ray security inspection system — Part 4:Human body security inspection system | 英文 |
101 | GB 15208.5-2018 | 微剂量X射线安全检查设备 第5部分:背散射物品安全检查设备 | Micro-dose X-ray security inspection system — Part 5:Backscatter object security inspection system | 英文 |
102 | GB 15210-2018 | 通过式金属探测门通用技术规范 | General specification for walk-through metal detector | 英文 |
103 | GB/T 15227-2019 | 建筑幕墙气密、水密、抗风压性能检测方法 | Test method of air permeability, watertightness, wind load resistance performance for curtain walls | 英文 |
104 | GB/T 15382-2021 | 气瓶阀通用技术要求 | General specifications of gas cylinder valves | 英文 |
105 | GB/T 15575-2008 | 钢产品标记代号 | Steel products standard designation | 英文 |
106 | GB/T 15677-2010 | 金属镧 | Lanthanum metal | 英文 |
107 | GB/T 16399-2021 | 黏土化学分析方法 | Methods for chemical analysis of clay | 英文 |
108 | GB/T 16476-2018 | 金属钪 | Scandium metal | 英文 |
109 | GB/T 16479-2020 | 碳酸轻稀土 | Light rare earth carbonate | 英文 |
110 | GB/T 16484.1-2009 | 氯化稀土、碳酸轻稀土化学分析方法 第1部分:氧化铈量的测定 硫酸亚铁铵滴定法 | Chemical analysis methods of rare earth chloride and light rare earth carbonate — Part 1:Determination of cerium oxide content — Ammonium ferrous sulfate titrimetry | 英文 |
111 | GB/T 16661-2018 | 碳酸铈 | Cerium carbonate | 英文 |
112 | GB/T 16950-2014 | 地质岩心钻探钻具 | Geological core drilling tools | 英文 |
113 | GB/T 17215.302-2013 | 交流电测量设备 特殊要求 第2部分:静止式谐波有功电能表 | Electricity metering equipment (a.c.) — Particular requirements — Part 2:Static harmonic meters for active energy | 英文 |
114 | GB/T 17215.304-2017 | 交流电测量设备 特殊要求 第4部分:经电子互感器接入的静止式电能表 | Electricity metering equipment (a.c.) — Particular requirements — Part 4:Static meters connected via electronic transformer | 英文 |
115 | GB/T 17748-2016 | 建筑幕墙用铝塑复合板 | Aluminium-plastic composite panel for curtain wall | 英文 |
116 | GB 17896-2022 | 普通照明用气体放电灯用镇流器能效限定值及能效等级 | Minimum allowable values of energy efficiency and energy efficiency grades of ballasts for gas discharge lamps for general lighting | 英文 |
117 | GB/T 17926-2022 | 车用压缩天然气瓶阀 | Compressed natural gas cylinder valve for vehicle | 英文 |
118 | GB/T 18264-2018 | 刨花板生产线验收通则 | Acceptance generality of the particleboard production line | 英文 |
119 | GB/T 18514-2018 | 人造板机械安全通则 | Safety code for wood—based panel machinery | 英文 |
120 | GB/T 18882.2-2017 | 离子型稀土矿混合稀土氧化物化学分析方法 第2部分:三氧化二铝量的测定 | Chemical analysis methods for mixed rare earth oxide of ion-absorpted type rare earth ore — Part 2:Determination of aluminum oxide content | 英文 |
121 | GB/T 18886-2019 | 纺织品 色牢度试验 耐唾液色牢度 | Textiles — Tests for colour fastness — Colour fastness to saliva | 英文 |
122 | GB 19044-2022 | 普通照明用荧光灯能效限定值及能效等级 | Minimum allowable values of energy efficiency and energy efficiency grades of fluorescent lamps for general lighting | 英文 |
123 | GB/T 19472.1-2019 | 埋地用聚乙烯(PE)结构壁管道系统 第1部分:聚乙烯双壁波纹管材 | Polyethylene (PE) structure wall pipeline system for underground usage — Part 1:Polyethylene double wall corrugated pipes | 英文 |
124 | GB/T 19565-2017 | 总辐射表 | Pyranometer | 英文 |
125 | GB/T 19813-2005 | 太阳能突起路标 | Solar energy raised pavement markers | 英文 |
126 | GB/T 20080-2017 | 液压滤芯技术条件 | General specification for hydraulic filters element | 英文 |
127 | GB/T 20234.3-2023 | 电动汽车传导充电用连接装置 第3部分:直流充电接口 | Connection set for conductive charging of electric vehicles—Part 3: DC charging coupler | 英文 |
128 | GB/T 20238-2018 | 木质地板铺装、验收和使用规范 | Installation, inspection and usage guidelines for wooden flooring | 英文 |
129 | GB/T 20452-2021 | 仁用杏杏仁质量等级 | Quality grades of apricot kernels | 英文 |
130 | GB/T 20491-2017 | 用于水泥和混凝土中的钢渣粉 | Steel slag powder used for cement and concrete | 英文 |
131 | GB/T 20564.8-2015 | 汽车用高强度冷连轧钢板及钢带 第8部分:复相钢 | Continuously cold rolled high strength steel sheet and strip for automobile — Part 8:Complex phase steel | 英文 |
132 | GB/T 20567-2020 | 钒氮合金 | Vanadium-nitrogen | 英文 |
133 | GB/T 20570-2015 | 玉米储存品质判定规则 | Guidelines for evaluation of maize storage character | 英文 |
134 | GB/T 20892-2020 | 镨钕金属 | Praseodymium-neodymium metal | 英文 |
135 | GB/T 20980-2021 | 饼干质量通则 | General quality of biscuit | 英文 |
136 | GB/T 20981-2021 | 面包质量通则 | General quality of bread | 英文 |
137 | GB 21454-2021 | 多联式空调(热泵)机组能效限定值及能效等级 | Minmum allowable values of the energy efficiency and energy efficiency grades for multi-connected air-condition (heat pump) units | 英文 |
138 | GB/T 21709.12-2009 | 针灸技术操作规范 第12部分:火针 | Standardized manipulations of acupuncture and moxibustion — Part 12:Fire acupuncture | 英文 |
139 | GB/T 21709.14-2009 | 针灸技术操作规范 第14部分:鍉针 | Standardized manipulation of acupuncture and moxibustion — Part 14:Di acupuncture | 英文 |
140 | GB/T 21709.16-2013 | 针灸技术操作规范 第16部分:腹针 | Standardized manipulations of acupuncture and moxibustion — Part 16:Abdominal acupuncture | 英文 |
141 | GB/T 21709.18-2009 | 针灸技术操作规范 第18部分:口唇针 | Standardized manipulations of acupuncture and moxibustion — Part 18:Oral and lip acupuncture | 英文 |
142 | GB/T 21709.19-2009 | 针灸技术操作规范 第19部分:腕踝针 | Standardized manipulations of acupuncture and moxibustion — Part 19:Wrist-ankle acupuncture | 英文 |
143 | GB/T 21709.22-2013 | 针灸技术操作规范 第22部分:刮痧 | Standardized manipulations of acupuncture and moxibustion — Part 22:Gua sha | 英文 |
144 | GB/T 21709.4-2008 | 针灸技术操作规范 第4部分 三棱针 | Standardized manipulations of acupuncture and moxibustion — Part 4:Three-edged acupuncture | 英文 |
145 | GB/T 21709.5-2008 | 针灸技术操作规范 第5部分 拔罐 | Standardized manipulations of acupuncture and moxibustion — Part 5:Cupping therapy | 英文 |
146 | GB/T 21709.6-2008 | 针灸技术操作规范 第6部分 穴位注射 | Standardized manipulations of acupuncture and moxibustion — Part 6:Point injection | 英文 |
147 | GB/T 21709.7-2008 | 针灸技术操作规范 第7部分 皮肤针 | Standardized manipulations of acupuncture and moxibustion — Part 7:Dermal acupuncture | 英文 |
148 | GB/T 21709.8-2008 | 针灸技术操作规范 第8部分 皮内针 | Standardized manipulations of acupuncture and moxibustion — Part 8:Intradermal acupuncture | 英文 |
149 | GB/T 22117-2018 | 信用 基本术语 | Credit — General terminology | 英文 |
150 | GB/T 22341.2-2008 | 冲天炉 第2部分:技术条件 | Cupola — Part 2:Technical requirements | 英文 |
151 | GB/T 22412-2016 | 普通装饰用铝塑复合板 | Aluminium-Plastic composite panel for ordinary decoration | 英文 |
152 | GB/T 22712-2021 | 变频电机用G系列冷却风机技术规范 | Technical specification for G series cooling fan for inverter motors | 英文 |
153 | GB/T 23146-2008 | 十二平均律的频率与音分的计算 | Вычисления частот и звуковых точек двенадцати законов | 俄文 |
154 | GB/T 23294-2021 | 耐磨耐火材料 | Abrasion resistant refractory materials | 英文 |
155 | GB/T 23538-2009 | 普通磨料 球磨韧性测定方法 | Conventional abrasive — Testing method for toughness (Ball mill method) | 英文 |
156 | GB/T 23583.1-2009 | 钢液浇包 第1部分:型式与基本参数 | Molten steel ladle — Part 1:Types and basic parameters | 英文 |
157 | GB/T 23583.2-2009 | 钢液浇包 第2部分:技术条件 | Molten steel ladle — Part 2:Technical requirements | 英文 |
158 | GB/T 23828-2023 | 高速公路LED可变信息标志 | Light-emitting diode changeable message signs of expressway | 英文 |
159 | GB/T 23905-2009 | 无损检测 超声检测用试块 | Non-destructive testing - Blocks for ultrasonic testing | 俄文 |
160 | GB/T 23906-2009 | 无损检测 磁粉检测用环形试块 | Non-destructive testing-Rings for magnetic particle testing | 俄文 |
161 | GB/T 23907-2009 | 无损检测 磁粉检测用试片 | Non-destructive testing-Shims for magnetic particle testing | 俄文 |
162 | GB/T 23911-2009 | 无损检测 渗透检测用试块 | Non-destructive testing-Blocks for penetrant testing | 俄文 |
163 | GB/T 24159-2022 | 焊接绝热气瓶 | Welded insulated cylinders | 英文 |
164 | GB/T 24174-2022 | 钢 烘烤硬化值(BH)的测定方法 | Steel — Determination of Bake-Hardening-Index (BH) | 英文 |
165 | GB/T 24180-2009 | 冷轧电镀铬钢板及钢带 | Cold-reduced electrolytic chromium/chromium oxide coated steel sheet and strip | 英文 |
166 | GB/T 24193-2009 | 铬矿石和铬精矿 铝、铁、镁和硅含量的测定 电感耦合等离子体原子发射光谱法 | Chromium ores and concentrates — Determination of aluminium iron magnesium and silicon content — Inductively coupled plasma atomic emission spectrometry | 英文 |
167 | GB/T 24226-2009 | 铬矿石和铬精矿 钙含量的测定 火焰原子吸收光谱法 | Chromium ores and concentrates — Determination of calcium contents — Flame atomic absorption spectrometric method | 英文 |
168 | GB/T 24231-2009 | 铬矿石 镁、铝、硅、钙、钛、钒、铬、锰、铁和镍含量的测定 波长色散X射线荧光光谱法 | Chrome ores — Determination of magnesium aluminum silicon calcium titanium vanadium chrome manganese iron and nickel content — Wavelength dispersive X-ray fluorescence spectrometric method | 英文 |
169 | GB/T 24238-2017 | 预应力钢丝及钢绞线用热轧盘条 | Hot-rolled wire rod for prestressed steel | 英文 |
170 | GB/T 24419-2009 |