ISO 15364:2021由国际标准化组织 IX-ISO 发布于 2021-02-12,并于 0000-00-00 实施。
ISO 15364:2021在国际标准分类中归属于: 47.020.30 管路系统。
ISO 15364:2021 船舶和航海技术液货舱用压力真空阀及防止火焰进入液货舱的装置的最新版本是哪一版?
最新版本是 ISO 15364:2021 。
This document is applicable to pressure-vacuum valves and to devices to prevent the passage of flame, both protecting cargo tanks, that can be subject to explosive gas/vapour and/or to gas/vapour pressure or vacuum beyond the design parameters of the system/tank. It specifies the minimum requirements for performance and testing. It also specifies design and in-service performance criteria, operational testing and maintenance requirements. Design or manufacturing in accordance with this document does not imply suitability for any given installation, it indicates that certain minimum requirements have been considered and that information necessary for determination of suitability is provided to the buyer of the equipment. The flame test procedures of ISO 16852:2016 are incorporated in this document. NOTE Minimum requirements for devices to prevent the passage of flame are found in the International Maritime Organization (IMO) “International Convention for the Safety of Life at Sea, as amended” ISOLAS), Chapter II-2, Regulation 4, and IMO Maritime Safety Committee (MSC) Circular No. 677 (MSC/Circ. 677), “Revised Standards for the Design, Testing and Locating of Devices to Prevent the Passage of Flame into Cargo Tanks in Tankers”, as amended.
对航海船舶用隔膜压力表碰到故障和维修方法 船舶救生装备安全系数高低直接管理到船员的生命。由国防海事局明文规定,救生装备应在规定的时间内经生产厂家或者具有资质的第三方机构检查,以确保航行中的正常使用。本文就船舶隔膜压力表检查级别的不同,浅析航海船舶用隔膜压力表经常碰到故障和维修方法。 船舶在海上航行工作时遇险或发生紧急情况时,应优先考虑船员生命安全。...
而在必要时,能自动通气调节平衡油罐内外压力,对油罐起到安全作用。当罐内油气压力大于油罐允许压力时,油蒸汽经压力阀外逸,此时真空阀处于关闭状态;当罐内油气压力小于油罐允许真空度时,新鲜空气通过真空阀进入罐内,此时压力阀处于关闭状态,允许压力(或真空压力)靠调节盘的重量来控制。 呼吸阀.jpg 而阻火器是用来阻止易燃气体,液体的火焰蔓延和防止回火而引起爆炸的安全装置。...
紧急逃生呼吸装置(EEBD)(Emergency escape breathing devices),仅用于从危险气体、烟雾、缺氧环境和处所的逃生。不得用于灭火、进入缺氧或液货舱等封闭处所,也不得作为消防员装置的呼吸器来替代使用。紧急逃生呼吸装置由一个能遮盖头部、颈部、肩部的防火焰头罩,头罩上有一个清晰、宽阔、明亮的观察视窗。...
,压力表是否工作正常; 燃烧头的清洗; 用润滑油进行擦洗; 用超声波进行清洗,可加0.5%的清洗剂进行清洗; 清洗灯及石英窗口; 清洗擦拭仪器,保持仪器清洁; 拆下雾化器和雾化室,检查雾化器状态; 用清洗剂和去离子水清洗,保证无沉积颗粒物,不堵塞; 检查O型圈是否老化; 检查泄压阀是否结住; 检查撞击球:是否腐蚀、是否有裂痕; 检查雾化器。 ...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号