61000-4-6 (REDLINE + STANDARD)-2008 Compatibilité électromagnétique (CEM) – Partie 4-6: Techniques d'essai et de mesure – Immunité aux perturbations conduites@ induites par les champs radioélectriques (Edition 3.0)
Electromagnetic compatibility (EMC) – Part 4-6: Testing and measurement techniques – Immunity to conducted disturbances@ induced by radio-frequency fields (Edition 3.0)
Compatibilité électromagnétique (CEM) – Partie 4-6: Techniques d'essai et de mesure – Immunité aux perturbations conduites@ induites par les champs radioélectriques (Edition 3.0) 是非强制性国家标准，您可以免费下载前三页
Scope and objectThis part of IEC 61000-4 relates to the conducted immunity requirements of electrical and electronic equipment to electromagnetic disturbances coming from intended radio-frequency (RF) transmitters in the frequency range 9 kHz up to 80 MHz. Equipment not having at least one conducting cable (such as mains supply@ signal line or earth connection) which can couple the equipment to the disturbing RF fields is excluded.NOTE 1 Test methods are defined in this part for measuring the effect that conducted disturbing signals@ induced by electromagnetic radiation@ have on the equipment concerned. The simulation and measurement of these conducted disturbances are not adequately exact for the quantitative determination of effects. The test methods defined are structured for the primary objective of establishing adequate repeatability of results at various facilities for quantitative analysis of effects.The object of this standard is to establish a common reference for evaluating the functional immunity of electrical and electronic equipment when subjected to conducted disturbances induced by radio-frequency fields. The test method documented in this part of IEC 61000 describes a consistent method to assess the immunity of an equipment or system against a defined phenomenon.NOTE 2 As described in IEC Guide 107@ this is a basic EMC publication for use by product committees of the IEC. As also stated in Guide 107@ the IEC product committees are responsible for determining whether this immunity test standard should be applied or not@ and if applied@ they are responsible for determining the appropriate test levels and performance criteria. TC 77 and its sub-committees are prepared to co-operate with product committees in the evaluation of the value of particular immunity tests for their products.