60204-1-2005
Sécurité des machines – Equipement électrique des machines – Partie 1: Règles générales (Edition 5)

Safety of machinery – Electrical equipment of machines – Part 1: General requirements (Edition 5)

60204-1-2005 发布历史

This part of IEC 60204 applies to the application of electrical@ electronic and programmable electronic equipment and systems to machines not portable by hand while working@ including a group of machines working together in a co-ordinated manner.NOTE 1 This part of IEC 60204 is an application standard and is not intended to limit or inhibit technological advancement. NOTE 2 In this part of IEC 60204@ the term electrical includes electrical@ electronic and programmable electronic matters (i.e. electrical equipment means electrical@ electronic and programmable electronic equipment).NOTE 3 In the context of this part of IEC 60204@ the term person refers to any individual and includes those persons who are assigned and instructed by the user or his agent(s) in the use and care of the machine in question.The equipment covered by this part of IEC 60204 commences at the point of connection of the supply to the electrical equipment of the machine (see 5.1).NOTE 4 The requirements for the electrical supply installation in buildings are given in the IEC 60364 series.This part of IEC 60204 is applicable to the electrical equipment or parts of the electrical equipment that operate with nominal supply voltages not exceeding 1 000 V for alternating current (a.c.) and not exceeding 1 500 V for direct current (d.c.)@ and with nominal supply frequencies not exceeding 200 Hz.NOTE 5 For higher voltages@ see IEC 60204-11.This part of IEC 60204 does not cover all the requirements (for example guarding@ interlocking@ or control) that are needed or required by other standards or regulations in order to protect persons from hazards other than electrical hazards. Each type of machine has unique requirements to be accommodated to provide adequate safety.This part specifically includes@ but is not limited to@ the electrical equipment of machines as defined in 3.35.NOTE 6 Annex C lists examples of machines whose electrical equipment can be covered by this part of IEC 60204.This part of IEC 60204 does not specify additional and special requirements that can apply to the electrical equipment of machines that@ for example:?C are intended for use in open air (i.e. outside buildings or other protective structures);?C use@ process@ or produce potentially explosive material (for example paint or sawdust);?C are intended for use in potentially explosive and/or flammable atmospheres;?C have special risks when producing or using certain materials;?C are intended for use in mines;?C are sewing machines@ units@ and systems (which are covered by IEC 60204-31);?C are hoisting machines (which are covered by IEC 60204-32).Power circuits where electrical energy is directly used as a working tool are excluded from this part of IEC 60204.

60204-1-2005由IEC - International Electrotechnical Commission 发布于 2005-10-01，并于 2009-02-19 实施。

60204-1-2005 发布之时，引用了标准

• 250 *， 2016-09-01 更新

* 在 60204-1-2005 发布之后有更新，请注意新发布标准的变化。

60204-1-2005的历代版本如下：

• 1965年01月01日 60204-1-1965 Equipement electrique des machine-outils Premiere partie: Equipement electrique des machines d'usage general (Edition 1.0)
• 1981年01月01日 60204-1-1981 Equipement electrique des machines industrielles Premiere partie: Regles generales (Edition 2.0)
• 1992年09月01日 60204-1-1992 Equipement électrique des machines industrielles - Partie 1: Règles générales (Edition 3.0)
• 1997年10月01日 60204-1-1997 Safety of Machinery - Electrical Equipment of Machines - Part 1: General Requirements (Edition 4.0; Incorporates Corrigendum 1: 03/1998)
• 2000年05月01日 60204-1-2000 Safety of Machinery - Electrical Equipment of Machines - Part 1: General Requirements (Edition 4.1; Edition 4 Consolidated with Amendment 1: 1999)
• 2005年10月01日 60204-1-2005 Sécurité des machines – Equipement électrique des machines – Partie 1: Règles générales (Edition 5)
• 2009年02月01日 60204-1-2009 Sécurité des machines – Equipement électrique des machines – Partie 1: Règles générales (Edition 5.1 Consolidated Reprint)

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 60204-1-2005 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

60204-1-2005

发布日期

2005年10月01日

实施日期

2009年02月19日

废止日期

无

中国标准分类号

/

国际标准分类号

/

发布单位

IEC - International Electrotechnical Commission

引用标准

250

适用范围

This part of IEC 60204 applies to the application of electrical@ electronic and programmable electronic equipment and systems to machines not portable by hand while working@ including a group of machines working together in a co-ordinated manner.NOTE 1 This part of IEC 60204 is an application standard and is not intended to limit or inhibit technological advancement. NOTE 2 In this part of IEC 60204@ the term electrical includes electrical@ electronic and programmable electronic matters (i.e. electrical equipment means electrical@ electronic and programmable electronic equipment).NOTE 3 In the context of this part of IEC 60204@ the term person refers to any individual and includes those persons who are assigned and instructed by the user or his agent(s) in the use and care of the machine in question.The equipment covered by this part of IEC 60204 commences at the point of connection of the supply to the electrical equipment of the machine (see 5.1).NOTE 4 The requirements for the electrical supply installation in buildings are given in the IEC 60364 series.This part of IEC 60204 is applicable to the electrical equipment or parts of the electrical equipment that operate with nominal supply voltages not exceeding 1 000 V for alternating current (a.c.) and not exceeding 1 500 V for direct current (d.c.)@ and with nominal supply frequencies not exceeding 200 Hz.NOTE 5 For higher voltages@ see IEC 60204-11.This part of IEC 60204 does not cover all the requirements (for example guarding@ interlocking@ or control) that are needed or required by other standards or regulations in order to protect persons from hazards other than electrical hazards. Each type of machine has unique requirements to be accommodated to provide adequate safety.This part specifically includes@ but is not limited to@ the electrical equipment of machines as defined in 3.35.NOTE 6 Annex C lists examples of machines whose electrical equipment can be covered by this part of IEC 60204.This part of IEC 60204 does not specify additional and special requirements that can apply to the electrical equipment of machines that@ for example:?C are intended for use in open air (i.e. outside buildings or other protective structures);?C use@ process@ or produce potentially explosive material (for example paint or sawdust);?C are intended for use in potentially explosive and/or flammable atmospheres;?C have special risks when producing or using certain materials;?C are intended for use in mines;?C are sewing machines@ units@ and systems (which are covered by IEC 60204-31);?C are hoisting machines (which are covered by IEC 60204-32).Power circuits where electrical energy is directly used as a working tool are excluded from this part of IEC 60204.