1.1 This document specifies conditions for the determination of the reduced viscosity (also known as viscosity number) and K-value of PVC resins. It is applicable to resins in powder form which consist of homopolymers of the monomer vinyl chloride and copolymers, terpolymers, etc., of vinyl chloride with one or more other monomers, but where vinyl chloride is the main constituent. The resins may contain small amounts of unpolymerized substances (e.g. emulsifying or suspending agents, catalyst residues, etc.) and other substances added during the course of the polymerization. This document is not applicable, however, to resins having a volatile-matter content in excess of 0,5 % ± 0,1 %, when determined in accordance with ISO 1269. In addition to this, it is not applicable to resins which are not entirely soluble in cyclohexanone. 1.2 The reduced viscosity and K-value of a particular resin are related to its molecular mass, but the relationship varies depending on the concentration and type(s) of other monomer(s) present. Hence, homopolymers and copolymers having the same reduced viscosity or K-value might not have the same molecular mass. 1.3 The values determined for reduced viscosity and K-value, for a particular sample of PVC resin, are influenced differently by the concentration of the solution chosen for the determination. Hence the use of the procedures described in this document only gives values for reduced viscosity and K-value that are comparable when the concentrations of the solutions used are identical. 1.4 Limiting viscosity number is not used for PVC resins. 1.5 The experimental procedures described in this document can also be used to characterize the polymeric fraction obtained during the chemical analysis of a PVC composition. However, the values calculated for the reduced viscosity and K-value in these circumstances might not indicate the actual values for the resin used to produce the composition because of the impure nature of the recovered polymer fraction.
EN ISO 1628-2:2020由欧洲标准化委员会 IX-CEN 发布于 2020-07-15,并于 2020-10-31 实施,于 2021-01-31 废止。
EN ISO 1628-2:2020在国际标准分类中归属于: 83.080.20 热塑性塑料。
非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 EN ISO 1628-2:2020 前三页,或者稍后再访问。
点击下载后,生成下载文件时间比较长,请耐心等待......
(常规方法)12ISO 3540-1976纸或塑料打印色带盘心特性13ISO 4575-2007塑料.聚氯乙烯糊料.使用塞维(Severs)流速计测定表观粘度14ISO 1068-1975塑料 聚氯乙烯(PVC)树脂压实的表观容积密度的测定15ISO 15103-1-2000塑料 聚苯撑醚(PPE)模塑和挤塑材料 第1部分:命名系统和基本规范16ISO 1264-1980塑料 氯乙烯均聚物和共聚物树脂水萃取物的...
新增国标《GB/T 1632.4-2020 塑料 使用毛细管黏度计测定聚合物稀溶液黏度 第4部分:聚碳酸酯(PC)模塑和挤出材料》将于2021年7月1日开始实施。本标准可以指导国内聚碳酸酯加工行业对过程的有效监测与控制,主要针对聚碳酸酯均聚物和共聚物,加入填料或不加填料的模塑或挤塑产品的稀溶液,使用毛细管粘度计测量以上聚合物的粘数,此方法简单高效。对加工行业的产品质量提升有很大帮助。 ...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号