PREN 13852-3-2018
起重机 海上起重机 第3部分:轻型海上起重机

Cranes - Offshore cranes - Part 3: Light offshore cranes


 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 PREN 13852-3-2018 前三页,或者稍后再访问。

您也可以尝试购买此标准,
点击右侧 “购买” 按钮开始采购(由第三方提供)。

点击下载后,生成下载文件时间比较长,请耐心等待......

 

标准号
PREN 13852-3-2018
发布
2018年
发布单位
CEN - European Committee for Standardization
当前最新
PREN 13852-3-2018
 
 
适用范围
This document applies to light offshore cranes including their supporting pedestals and structures. NOTE The supporting pedestal and structures such as columns and boom rests are covered by this standard to the extent where their main purpose is to support the crane. This document is applicable to light offshore cranes@ whose structures are made of steel. The following characteristics distinguish light offshore cranes from other types of offshore cranes: ?? maximum rated capacity 20 tonnes@ maximum load moment 300 tm; ?? limitation for off-board lifting operation Hs = 2@0 m and wind speed 15 m/s (3s gust); ?? maximum number of working cycles class U3 (C ??1@25 ?? 105) according to EN 13001-1. This document gives requirements for all significant hazards@ hazardous situations and events relevant to light offshore cranes@ when used as intended and under conditions foreseen by the risk assessment (see Clause 4). This document is not applicable for: a) transportation@ assembly@ disabling@ scrapping or changing the configuration of the crane; b) non-fixed load lifting attachments@ i.e. any item between the hook and the load; c) lifting operations in ambient temperatures below ?20 ?? d) lifting operations in ambient temperatures above 45 ?? e) lifting operations involving more than one crane; f) accidental loads due to collisions or earthquakes; g) emergency personnel rescue operations (except training); h) subsea lifting operations; i) general purpose offshore cranes@ floating cranes and motion compensated cranes. This document is applicable for the lifting of personnel. This document is applicable to light offshore cranes@ which are manufactured after the date of approval by CEN of this document.

PREN 13852-3-2018相似标准


推荐

173项最新国标发布,多项涉食品检测

2019-12-0140GB/T 20851.3-2019电子收费  专用短程通信  3部分:应用层2019-12-0141GB/T 20851.4-2019电子收费  专用短程通信  4部分:设备应用2019-12-0142GB/T 20851.5-2019电子收费  专用短程通信  5部分:物理层主要参数测试方法2019-12-0143GB/T 21682-2019旋挖钻机2019-12-...

国家标准委公开征求对216项拟立项国家标准项目的意见

2023/4/1195包装 塑料桶 1部分:公称容量为113.6升至220升的可拆盖(开口)桶制订2023/4/1196起重机 信息标牌 3部分:塔式起重机修订2023/4/1197草原生态系统碳计量监测评价技术规范制订2023/4/1198机器人技术 词汇修订2023/4/1199激光显示器件 5-11部分:激光光源模组光学测试方法制订2023/4/1200躺卧保护组织完整性的辅助器具 7...

《包装容器 钢桶 6部分:锥形开口钢桶》等389项国家标准

GB/T 24673-20092021-12-01123GB/T 24810.2-2021起重机 限制器和指示器 2部分:流动式起重机 起重机 限制器和指示器 2部分:流动式起重机GB/T 24810.2-20092021-12-01124GB/T 24817.2-2021起重机 控制装置布置形式和特性 2部分:流动式起重机 起重机 控制装置布置形式和特性 2部分:流动式起重机GB/T 24817.2...

国际标准化组织(ISO)2019年发布的我国牵头制修订国际标准清单

for engine  maintenance 潍柴动力股份有限公司山东16ISO/TC96/SC7ISO  10245-3:2019起重机——限制器和指示器——3部分:塔式起重Cranes  -- Limiting and indicating devices -- Part 3: Tower cranes中联重科股份有限公司湖南17ISO/TC105ISO  19427:2019 钢丝绳--...


PREN 13852-3-2018系列标准





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号