GSO ISO 11212-3:2014
淀粉及其衍生物重金属含量 第3部分:热释电溶解原子吸收光谱法测定铅含量

Starch and derived products -- Heavy metals content -- Part 3: Determination of lead content by atomic absorption spectrometry with electrothermal atomization


 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 GSO ISO 11212-3:2014 前三页,或者稍后再访问。

您也可以尝试购买此标准,
点击右侧 “立即购买” 按钮开始采购(由第三方提供)。

 

标准号
GSO ISO 11212-3:2014
发布
2014年
发布单位
GSO
当前最新
GSO ISO 11212-3:2014
 
 
适用范围
This part of ISO 11212 specifies a method for the determination of the lead content of starch, including derivatives and by-products, by atomic absorption spectrometry with electrothermal atomization. The number of parameters for the procedure involved in the electrothermal atomization is far larger than in flame atomization; it is thus impossible to propose a comprehensive method likely to ensure the attainment of satisfactory results on all types of apparatus currently available. Each analyst should therefore optimize the conditions of use of his/her own apparatus on the basis of general or particular instructions

GSO ISO 11212-3:2014相似标准


推荐

一文尽览测定钾的方法

部分:钾量和钠量的测定 火焰原子吸收光谱法  GB/T 4325.16-2013 钼化学分析方法 16部分:钾量的测定 火焰原子吸收光谱法  GB/T 4324.18-2012 钨化学分析方法 18部分:钾量的测定 火焰原子吸收光谱法  GB/T 17767.3-2010 有机-无机复混肥料的测定方法 3部分:总钾含量  GB/T 15076.16-2008 钽铌化学分析方法.钠量和钾量的测定...

电池中汞、镉、含量的测定

采用原子荧光光谱法测定含量,采用火焰原子吸收光谱法测定、镉含量。试验条件:环境条件:除有特殊规定外,检验应在以下环境中进行:a) 温度:15℃~35℃;b) 相对湿度:30%~90%;c) 大气压力:86 kPa~106 kPa。安全条件:应采取适当防护措施,防止造成人身伤害。应由有资格、有经验的技术人员进行测定。...

工信部拟制修订大批分析方法标准

 2017-0179T-YS贵金属阳极泥分银渣化学分析方法 3部分:铜量的测定 原子吸收光谱法和碘量法推荐制定  2019原材料工业司全国有色金属标准化技术委员会深圳市中金岭南有色金属股份有限公司韶关冶炼厂 2017-0180T-YS贵金属阳极泥分银渣化学分析方法 4部分:锑量的测定 原子吸收光谱法和硫酸铈滴定法推荐制定  2019原材料工业司全国有色金属标准化技术委员会深圳市中金岭南有色金属股份有限公司韶关冶炼厂...

微波消解法测定沉积物中5种重金属元素的前处理技术

  [3] 李喜凤,邱天宝,郝哲,等.微波消解-原子吸收分光光度法测定蒲公英中重金属含量[J].时珍国医国药,2011,22(6):92-93.   [4] 王京文,徐文,周航,等.土壤样品中重金属消解方法的探讨[J].浙江农业科学,2007(2):106-108....





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号