EN 60079-15:2005
爆炸性环境.第15部分:"n"型设备防护

"Electrical apparatus for explosive gas atmospheres Part 15: Construction@ test and marking of type of protection ""n"" electrical apparatus"


 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 EN 60079-15:2005 前三页,或者稍后再访问。

您也可以尝试购买此标准,
点击右侧 “购买” 按钮开始采购(由第三方提供)。

点击下载后,生成下载文件时间比较长,请耐心等待......

 

标准号
EN 60079-15:2005
发布
2005年
发布单位
CENELEC - European Committee for Electrotechnical Standardization
替代标准
EN 60079-15:2010
当前最新
EN 60079-15:2010
 
 
适用范围
"This part of IEC 60079 specifies requirements for the construction@ testing and marking for Group II electrical apparatus with type of protection@ ""n"" intended for use in explosive gas atmospheres. This part is applicable to non-sparking electrical apparatus and also to electrical apparatus with parts or circuits producing arcs or sparks or having hot surfaces which@ if not protected in one of the ways specified in this standard@ could be capable of igniting a surrounding explosive gas atmosphere. This standard describes several different methods by which this can be achieved which may be combined with other methods described in IEC 60079-0. NOTE 1 A non-incendive component is limited in use to the particular circuit for which it has been shown to be non-ignition capable and@ therefore@ cannot be separately assessed as complying with this standard. NOTE 2 Compliance with this standard does not imply any removal of@ or lowering of the requirements of any other standard with which the electrical apparatus complies. NOTE 3 This part supplements@ and may enhance@ the requirements for apparatus for normal industrial applications. Where compliance with other IEC standards is indicated@ such as IEC 60034 for motors and IEC 60598-2 for luminaires@ proving compliance to those standards is normally the responsibility of the manufacturer."

EN 60079-15:2005相似标准


推荐

防爆空调的标准

  防爆空调产品必需符合国家相关防爆标准才允许进入市场,国家公布的防爆类产品执行标准有;  GB3836.1-2000 爆炸性气体环境用电气设备 1部分:通用要求  GB3836.2-2000 爆炸性气体环境用电气设备 2部分:隔爆“d”  GB3836.4-2000 爆炸性气体环境用电气设备 2部分:本安“ib”  GB3836.9-2006 爆炸性气体环境用电气设备 9部分:浇封“...

防爆空调的概述

标准  防爆空调产品必需符合国家相关防爆标准才允许进入市场,国家公布的防爆类产品执行标准有;  GB3836.1-2000 爆炸性气体环境用电气设备 1部分:通用要求  GB3836.2-2000 爆炸性气体环境用电气设备 2部分:隔爆“d”  GB3836.4-2000 爆炸性气体环境用电气设备 2部分:本安“ib”  GB3836.9-2006 爆炸性气体环境用电气设备 9部分:浇封...

防爆空调的概述及特点

标准  防爆空调产品必需符合国家相关防爆标准才允许进入市场,国家公布的防爆类产品执行标准有;  GB3836.1-2000 爆炸性气体环境用电气设备 1部分:通用要求  GB3836.2-2000 爆炸性气体环境用电气设备 2部分:隔爆“d”  GB3836.4-2000 爆炸性气体环境用电气设备 2部分:本安“ib”  GB3836.9-2006 爆炸性气体环境用电气设备 9部分:浇封...

防爆地磅的选型和安装注意事项

2)爆炸性环境的电气安装,在达到一般电气安 装规范要求之后,还需按GB50058 - 92《爆炸和火 灾危险场所电力设计技术规范》GB50257 - 96《电 气装置安装工程爆炸和火灾危险环境电气装置施工 及验收规范》、CD90B - 85《爆炸危险场所的配线及 电气设备安装通用图》以及GB3836. 15 - 2000《爆 炸性气体环境用电气设备15部分:危险场所电 气安装(煤矿除外...


谁引用了EN 60079-15:2005 更多引用





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号