GSO ISO 15783:2021
无密封旋转动力泵 II 级 规范

Seal-less rotodynamic pumps — Class II — Specification


GSO ISO 15783:2021 发布历史

GSO ISO 15783:2021由GSO 发布于 2021-07-01。

GSO ISO 15783:2021在国际标准分类中归属于: 23.080 泵。

GSO ISO 15783:2021 无密封旋转动力泵 II 级 规范的最新版本是哪一版?

最新版本是 GSO ISO 15783:2021

GSO ISO 15783:2021的历代版本如下:

 

1.1 This International Standard specifies the requirements for seal-less rotodynamic pumps that are driven with permanent magnet coupling (magnet drive pumps) or with canned motor, and which are mainly used in chemical processes, water treatment and petrochemical industries. Their use can be dictated by space, noise, environment or safety regulations. Seal-less pumps are pumps where an inner rotor is completely contained in a pressure vessel holding the pumped fluid. The pressure vessel or primary containment device is sealed by static seals such as gaskets or O-rings. 1.2 Pumps will normally conform to recognized standard specifications (e.g. ISO 5199, explosion protection, electromagnetic compatibility), except where special requirements are specified herein. 1.3 This International Standard includes design features concerned with installation, maintenance and operational safety of the pumps, and defines those items to be agreed upon between the purchaser and manufacturer/supplier. 1.4 Where conformity to this International Standard has been requested and calls for a specific design feature, alternative designs may be offered providing that they satisfy the intent of this International Standard and they are described in detail. Pumps which do not conform with all requirements of this International Standard may also be offered providing that the deviations are fully identified and described. Whenever documents include contradictory requirements, they should be applied in the following sequence of priority: a) purchase order (or inquiry, if no order placed), see annexes D and E; b) data sheet (see annex A) or technical sheet or specification; c) this International Standard; d) other standards.

标准号
GSO ISO 15783:2021
发布
2021年
发布单位
GSO
当前最新
GSO ISO 15783:2021
 
 

GSO ISO 15783:2021相似标准


推荐

磁力驱动密封形式

磁力驱动密封形式与屏蔽一样,都属于轴封结构,为了确保运输物料时可以一滴不漏而采用静密封,在运行时利用磁力传统空气隙带动与叶轮连接的内磁转子同步旋转,从而实现动力接触传递,这一独特的运行原理和密封形式使得磁力成为目前安全系数非常高的运输设备。磁力驱动密封形式独特,在启用机时,内转子在压力密封腔之中,旋转轴在不穿过体的基础上,能够实现无泄漏的动力支撑。...

磁力简介

  磁力(magnetic pump)是属于水泵领域的一个分支,是一种将永磁联轴的工作原理应用于离心的新产品。磁力、磁力传动器、电动机三部分组成。磁力磁力传动器由外磁转子、内磁转子及不导磁的隔离套组成,当电动机带动外磁转子旋转时,磁场能穿透空气隙和非磁性物质,带动与叶轮相连的内磁转子作同步旋转,实现动力接触同步传递,将容易泄露的动密封结构转化为零泄漏的静密封结构。...

磁力概述

  磁力驱动(简称磁力)是将永磁联轴的工作原理应用于离心的新产品,设计合理,工艺先进,具有全密封,无泄漏,耐腐蚀等特点。  磁力、磁力传动器、电动机三部分组成。关键部件磁力传动器由外磁转子 、内磁转子及不导磁的隔离套组成。当电动机带动外磁转子旋转时,磁场能穿透空气隙和非磁性物质,带动与叶轮相连的内磁转子作同步旋转,实现动力接触传递,将动密封转化为静密封。...

旋转蒸发器概述(二)

目前市面上,好的隔膜真空,极限真空可以达到2mbar,DMF在常温下都可以蒸馏出来。   3、蒸发瓶的转速   蒸发瓶的转速越快,瓶内表面浸润面积愈大,受热面积大;但同时液膜厚度也愈厚,增大传热温差。对于不同粘度的物料,存在转速。且转动动力由马达提供,市面上直流刷马达、交流马达和步进马达都有,参差不齐,直流刷马达的反馈是好的,10年免维修维护。   ...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号