EN ISO 80079-37:2016
爆炸性环境.第37部分:爆炸性环境用非电气设备.非电气型防护结构安全

Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety ''c''@ control of ignition sources ''b''@ liquid immersion ''k''


 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 EN ISO 80079-37:2016 前三页,或者稍后再访问。

您也可以尝试购买此标准,
点击右侧 “购买” 按钮开始采购(由第三方提供)。

点击下载后,生成下载文件时间比较长,请耐心等待......

 

标准号
EN ISO 80079-37:2016
发布
2016年
发布单位
CEN - European Committee for Standardization
当前最新
EN ISO 80079-37:2016
 
 
适用范围
This part of ISO/IEC 80079 specifies the requirements for the design and construction of nonelectrical equipment@ intended for use in explosive atmospheres@ protected by the types of protection constructional safety ??c??@ control of ignition source ??b?? and liquid immersion ??k??. This part of ISO/IEC 80079 supplements and modifies the requirements in ISO 80079-36. Where a requirement of this standard conflicts with the requirement of ISO 80079-36 the requirement of this standard takes precedence. Types of Protection ??c??@ ??k?? and ??b?? are not applicable for Group I@ EPL Ma without additional protective precautions. The types of ignition protection described in the standard can be used either on their own or in combination with each other to meet the requirements for equipment of Group I@ Group II@ and Group III depending on the ignition hazard assessment in ISO 80079-36.

EN ISO 80079-37:2016相似标准


推荐

防爆冰箱的引用标准

GB3836.1-2000爆炸性气体环境防爆电气设备 通用要求GB3836.4-2000爆炸性气体环境防爆电气设备 本质安全电路和电气设备“I”GB3836.9-90爆炸性气体环境防爆电气设备 浇封电气设备“m”GB3836.10-2000爆炸性气体环境防爆电气设备 气密电气设备“h”3....

防爆手机的防爆等级划分

本安设备和关联设备的本质安全部分分为ia和ib:¨ ia:正常工作 + 一个故障 + 任意组合的两个故障均不能引起点燃的电气设备。¨ ib:正常工作 + 一个故障条件下不能引起点燃的本质安全电气设备。由此可见ia等级高于ib等级关联设备:装有本质安全电路和非本质安全电路,且结构是非本质安全电路不能对本质安全电路产生不利影响的电器设备。2. 隔爆 “d” 具有隔爆外壳的电气设备。...

防爆地磅的选型和安装注意事项

2)爆炸性环境电气安装,在达到一般电气安 装规范要求之后,还需按GB50058 - 92《爆炸和火 灾危险场所电力设计技术规范》GB50257 - 96《电 气装置安装工程爆炸和火灾危险环境电气装置施工 及验收规范》、CD90B - 85《爆炸危险场所的配线及 电气设备安装通用图》以及GB3836. 15 - 2000《爆 炸性气体环境电气设备15部分:危险场所电 气安装(煤矿除外...

安装四合一气体检测仪探测器的注意事项

在工业固定式四合一气体检测仪安装的时候,除了主控室中的监控部分,还需要在有存在相关气体泄漏的场合,安装气体检测探测器,即气体检测传感器。由于四合一气体检测仪探测器为四种不同的气体探测器,在安装不同的气体探测器过程中相关的安装注意事项。1、防爆要求含有爆炸性混合物的环境,称为爆炸性环境。按规定条件设计制造而不会引起周围爆炸性混合物爆炸的电气设备,称为爆炸性环境防爆电气设备。...


谁引用了EN ISO 80079-37:2016 更多引用





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号