ISO 13934-1:1999由国际标准化组织 IX-ISO 发布于 1999-02。
ISO 13934-1:1999 在中国标准分类中归属于: W04 基础标准与通用方法,在国际标准分类中归属于: 59.080.30 纺织物。
本标准有修改采用的 中文版 GB/T 3923.1-2013 纺织品 织物拉伸性能 第1部分:断裂强力和断裂伸长率的测定(条样法)
This part of EN ISO 13934 specifies a procedure to determine the maximum force and elongation at maximum force of textile fabrics using a strip method. Note: Part 2 of EN ISO 13934 describes the method known as the grab method. For informative references see annex C. The method is mainly applicable to woven textile fabrics. It can be applicable to fabrics produced by other techniques. It is not normally applicable to woven elastic fabrics, geotextiles, nonwovens, coated fabrics, textile-glass woven fabrics and fabrics made from carbon fibres or polyolefin tape yarns (see annex C). The method specifies the determination of the maximum force and elongation at maximum force of test specimens in equilibrium with the standard atmosphere for testing, and of test specimens in the wet state. The method is restricted to the use of constant rate of extension (CRE) testing machines. 本标准规定了一种采用条样法测定织物断裂强力和断裂伸长率的方法。
能材料试验机技术指标1、测试力值范围:0~20000N2、测试力值度:±1%3、拉伸长度范围:0~800mm4、拉伸长度度:±1%5、拉伸速度: 10~1000mm/min6、电源:220V 50HZ 2KW 能材料试验机适用标准GB/T 3923.1-1997《纺织品 织物拉伸性能 第1部分:断裂强力和断裂伸长率的测定 条样法》FZ/T 60005-1991《非织造布断裂强力和断裂伸长率的测定》GB...
织物撕破强力测试标准方法中,裤形法(GB/T 3917.2—2009)、梯形法(GB/T 3917.3—2009)和冲击摆锤法(GB/T 3917.1—2009)三种方法撕裂原理相似,结果之间具有一定相关性。由于撕破强力试验能客观地反映纺织品在实际穿着中突然撕裂的特性和受整理加工影响的程度,该项测试在纺织品国际贸易中被广泛应用。...
为此,我们依据GB/T3923.1-1997《纺织品织物拉伸性能第1部分:断裂强力和断裂伸长率的测定条样法》对整个试验过程进行重新的策划,从每个步骤、动作的细节人手,编制了一份详细到每个动作分解的纺织品断裂强力/断裂伸长率试验细则。将操作细化到样品的裁样、预处理、试验中样品的确认、设备参数的确定、试样的夹持、测定步骤等每个环节。...
纺织品国标检测标准: GB/T 24218.1-2009纺织品非织造布试验方法第1部分:单位面积质量的测定 GB/T 24218.2-2009纺织品非织造布试验方法第2部分:厚度的测定 GB/T 24218.3-2010纺织品非织造布试验方法第3部分:断裂强力和断裂伸长率的测定(条样法) GB/T 24218.6-2010纺织品非织造布试验方法第6部分:吸收性的测定...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号