DIN 6319:2001由德国标准化学会 DE-DIN 发布于 2001-10。
DIN 6319:2001 在中国标准分类中归属于: J13 紧固件,在国际标准分类中归属于: 21.060.30 垫圈、锁紧件。
Spherical washers and conical seats are used to transmit clamping forces in cases where the clamping devices have to adapt themselves to surfaces that are not parallel to one another. The paring on spherical washers and conical seats allows the clamp bolts to be inclined by 30?relative to the axis of the assembly. For slots, such as those in clamps according to DIN 6314, DIN 6315 and DIN 6316 only type G conical seats shall be used. Conical seats type D are only to be used wiht plain closed ring surfaces, not with slots.#,,#
这样调整之所以能够排除故障,是因为调节座5的内孔是锥形的。锥形轴套4在轴向有槽口,如图10-3-4所示。当双眼螺母1向里旋进时,将锥形套向里顶,使锥形套在前进时,槽口变小,内孔收缩,将齿杆10夹得更紧,加大了齿轮转动的摩擦阻力,从而制止自动下降。...
这样调整之所以能够排除故障,是因为调节座5的内孔是锥形的。锥形轴套4在轴向有槽口。当双眼螺母1向里旋进时,将锥形套向里顶,使锥形套在前进时,槽口变小,内孔收缩,将齿杆10夹得更紧,加大了齿轮转动的摩擦阻力,从而制止自动下降。...
这样调整之所以能够排除故障,是因为调节座5的内孔是锥形的。锥形轴套4在轴向有槽口。当双眼螺母1向里旋进时,将锥形套向里顶,使锥形套在前进时,槽口变小,内孔收缩,将齿杆10夹得更紧,加大了齿轮转动的摩擦阻力,从而制止自动下降。...
这样调整之所以能够排除故障,是因为调节座5的内孔是锥形的。锥形轴套4在轴向有槽口,如图所示。当双眼螺母1向里旋进时,将锥形套向里顶,使锥形套在前进时,槽口变小,内孔收缩,将齿杆10夹得更紧,加大了齿轮转动的摩擦阻力,从而制止自动下降。...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号