DD CEN/TS 15411-2006 发布历史

This Technical Specification specifies three methods of digestion for solid recovered fuels: a) microwave assisted digestion with hydrofluoric, nitric and hydrochloric acid mixture; b) hot water bath digestion with hydrofluoric, nitric and hydrochloric acid mixture, after ashing of the SRFs sample; c) oven digestion with nitric, perchloric and hydrofluoric acid mixture. Instrumental determination of As, Ba, Be, Cd, Cr, Co, Cu, Pb, Mn, Mo, Ni, Sb, Se, Tl, V, Zn is performed by Inductively Coupled Plasma with optical or mass detection or graphite furnace Atomic Absorption Spectrometry. Hg can be analysed only after the microwave assisted procedure or, alternatively, by a direct analysis method. The effectiveness of the digestion can be verified by qualitative X-ray fluorescence (XRF) analysis on the remaining residue. If necessary an alternative digestion method (among those proposed) is used. Method a) is recommended for general use, but the amount of the test portion can be very low in case of high concentration of organic matter. Method b) is recommended for SRFs with high organic matter concentration that can be difficult to digest with the other methods. This method is not suitable for mercury. Method c) is recommended for SRFs samples for which the other methods leave a significant insoluble residue.

DD CEN/TS 15411-2006由英国标准学会 GB-BSI 发布于 2006-10-31。

DD CEN/TS 15411-2006 在中国标准分类中归属于: D20 固体燃料矿综合，在国际标准分类中归属于: 75.160.10 固体燃料。

DD CEN/TS 15411-2006 发布之时，引用了标准

CEN/TS 15357-2006
CEN/TS 15413
EN 13656 *， 2020-10-31 更新

* 在 DD CEN/TS 15411-2006 发布之后有更新，请注意新发布标准的变化。

DD CEN/TS 15411-2006的历代版本如下：

2006年10月31日 DD CEN/TS 15411-2006

非常抱歉，我们暂时无法提供预览，您可以试试：免费下载 DD CEN/TS 15411-2006 前三页，或者稍后再访问。

注意：点击下载后，生成下载文件时间比较长，请耐心等待......

标准号: DD CEN/TS 15411-2006
发布日期: 2006年10月31日
实施日期
废止日期: 无
中国标准分类号: D20
国际标准分类号: 75.160.10
发布单位: GB-BSI
引用标准: CEN/TS 15357-2006 prCEN/TS 15403 CEN/TS 15413 EN 13656 prCEN/TS 15414-3

适用范围: This Technical Specification specifies three methods of digestion for solid recovered fuels: a) microwave assisted digestion with hydrofluoric, nitric and hydrochloric acid mixture; b) hot water bath digestion with hydrofluoric, nitric and hydrochloric acid mixture, after ashing of the SRFs sample; c) oven digestion with nitric, perchloric and hydrofluoric acid mixture. Instrumental determination of As, Ba, Be, Cd, Cr, Co, Cu, Pb, Mn, Mo, Ni, Sb, Se, Tl, V, Zn is performed by Inductively Coupled Plasma with optical or mass detection or graphite furnace Atomic Absorption Spectrometry. Hg can be analysed only after the microwave assisted procedure or, alternatively, by a direct analysis method. The effectiveness of the digestion can be verified by qualitative X-ray fluorescence (XRF) analysis on the remaining residue. If necessary an alternative digestion method (among those proposed) is used. Method a) is recommended for general use, but the amount of the test portion can be very low in case of high concentration of organic matter. Method b) is recommended for SRFs with high organic matter concentration that can be difficult to digest with the other methods. This method is not suitable for mercury. Method c) is recommended for SRFs samples for which the other methods leave a significant insoluble residue.

DD CEN/TS 15411-2006

Solid recovered fuels — Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)