DIN EN ISO 14224-2007
石油、石化和天然气工业.设备可靠性和维修数据的采集与交换
Petroleum, petrochemical and natural gas industries - Collection and exchange of reliability and maintenance data for equipment (ISO 14224:2006); English version EN ISO 14224:2006
DIN EN ISO 14224-2007 发布历史
This International Standard provides a comprehensive basis for the collection of reliability and maintenance (RM) data in a standard format for equipment in all facilities and operations within the petroleum, natural gas and petrochemical industries during the operational life cycle of equipment. It describes data-collection principles and associated terms and definitions that constitute a "reliability language" that can be useful for communicating operational experience. The failure modes defined in the normative part of this International Standard can be used as a "reliability thesaurus" for various quantitative as well as qualitative applications. This International Standard also describes data quality control and assurance practices to provide guidance for the user. Standardization of data-collection practices facilitates the exchange of information between parties, e.g. plants, owners, manufacturers and contractors. This International Standard establishes requirements that any in-house or commercially available RM data system is required to meet when designed for RM data exchange. Examples, guidelines and principles for the exchange and merging of such RM data are addressed. Annex A contains a summary of equipment that this International Standard covers. • This International Standard recommends a minimum amount of data that is required to be collected and it focuses on two main issues: — data requirements for the type of data to be collected for use in various analysis methodologies; — standardized data format to facilitate the exchange of reliability and maintenance data between plants, owners, manufacturers and contractors. • The following main categories of data are to be collected: — equipment data, e.g. equipment taxonomy, equipment attributes; — failure data, e.g. failure cause, failure consequence; — maintenance data, e.g. maintenance action, resources used, maintenance consequence, down time. NOTE Clause 9 gives further details on data content and data format. • The main areas where such data are used are the following: — reliability, e.g. failure events and failure mechanisms; — availability/efficiency, e.g. equipment availability, system availability, plant production availability; — maintenance, e.g. corrective and preventive maintenance, maintenance supportability; — safety and environment, e.g. equipment failures with adverse consequences for safety and/or environment. This International Standard does not apply to the following: — data on (direct) cost issues; — data from laboratory testing and manufacturing (e.g. accelerated lifetime testing); — complete equipment data sheets (only data seen relevant for assessing the reliability performance are included); — additional on-service data that an operator, on an individual basis, can consider useful for operation and maintenance; — methods for analysing and applying RM data (however, principles for how to calculate some basic reliability and maintenance parameters are included in the annexes).
DIN EN ISO 14224-2007由德国标准化学会 DE-DIN 发布于 2007-04。
DIN EN ISO 14224-2007 在中国标准分类中归属于: E90 石油勘探、开发、集输设备综合。
DIN EN ISO 14224-2007 发布之时，引用了标准
- IEC 60076-1-2000 电源变压器.第1部分:总则
- IEC 60076-2-1993 电力变压器 第2部分:温升
- IEC 60034-1-2004 旋转电机.第1部分:额定值和性能
- IEC 62114 电气绝缘结构(EIS).热分级
DIN EN ISO 14224-2007的历代版本如下：
- 2007年04月 DIN EN ISO 14224-2007 石油、石化和天然气工业.设备可靠性和维修数据的采集与交换
- 2017年04月 DIN EN ISO 14224-2017 石油、石化产品和天然气工业.设备可靠性和维修数据的采集与交换(ISO 14224-2016,修正版2016-10-01);英文版本EN ISO 14224-2016,只在CD-ROM
- 标准号
- DIN EN ISO 14224-2007
- 发布日期
- 2007年04月
- 实施日期
- 废止日期
- 无
- 中国标准分类号
- E90
- 发布单位
- DE-DIN
- 引用标准
- IEC 60076-1-2000 IEC 60076-2-1993 EC 60076-3 IEC 60034-1-2004 IEC 62114
- 代替标准
- DIN EN ISO 14224-2017
- 被代替标准
- DIN EN ISO 14224-2005
- 适用范围
- This International Standard provides a comprehensive basis for the collection of reliability and maintenance (RM) data in a standard format for equipment in all facilities and operations within the petroleum, natural gas and petrochemical industries during the operational life cycle of equipment. It describes data-collection principles and associated terms and definitions that constitute a "reliability language" that can be useful for communicating operational experience. The failure modes defined in the normative part of this International Standard can be used as a "reliability thesaurus" for various quantitative as well as qualitative applications. This International Standard also describes data quality control and assurance practices to provide guidance for the user. Standardization of data-collection practices facilitates the exchange of information between parties, e.g. plants, owners, manufacturers and contractors. This International Standard establishes requirements that any in-house or commercially available RM data system is required to meet when designed for RM data exchange. Examples, guidelines and principles for the exchange and merging of such RM data are addressed. Annex A contains a summary of equipment that this International Standard covers. • This International Standard recommends a minimum amount of data that is required to be collected and it focuses on two main issues: — data requirements for the type of data to be collected for use in various analysis methodologies; — standardized data format to facilitate the exchange of reliability and maintenance data between plants, owners, manufacturers and contractors. • The following main categories of data are to be collected: — equipment data, e.g. equipment taxonomy, equipment attributes; — failure data, e.g. failure cause, failure consequence; — maintenance data, e.g. maintenance action, resources used, maintenance consequence, down time. NOTE Clause 9 gives further details on data content and data format. • The main areas where such data are used are the following: — reliability, e.g. failure events and failure mechanisms; — availability/efficiency, e.g. equipment availability, system availability, plant production availability; — maintenance, e.g. corrective and preventive maintenance, maintenance supportability; — safety and environment, e.g. equipment failures with adverse consequences for safety and/or environment. This International Standard does not apply to the following: — data on (direct) cost issues; — data from laboratory testing and manufacturing (e.g. accelerated lifetime testing); — complete equipment data sheets (only data seen relevant for assessing the reliability performance are included); — additional on-service data that an operator, on an individual basis, can consider useful for operation and maintenance; — methods for analysing and applying RM data (however, principles for how to calculate some basic reliability and maintenance parameters are included in the annexes).