ISO 21367:2007由国际标准化组织 IX-ISO 发布于 2007-05。
ISO 21367:2007 在中国标准分类中归属于: G31 合成树脂、塑料基础标准与通用方法,在国际标准分类中归属于: 13.220.40 材料和制品的可燃性和燃烧性能,83.080.01 塑料综合。
ISO 21367:2007 塑料.对火的反应.火焰扩散和垂直向试样燃烧产物释放的试验方法的最新版本是哪一版?
最新版本是 ISO 21367:2007 。
* 在 ISO 21367:2007 发布之后有更新,请注意新发布标准的变化。
This International Standard specifies a test method for plastics for the determination of the heat release rate, ignitability, surface spread of a flame, falling droplets/particles and smoke production using a “medium” scale specimen that simulates the early development stage of the fire. This test method can be used as a screening test for intermediate scale and large scale tests in addition to its use in factory production control, research and product development. This test method provides data that is suitable for comparing reaction-to-fire performance of many materials, products, composites or assemblies under end use application conditions. The results of this test method are limited to specimens with heat release rates of less than 10 kW.
FTT 提供符合所有这些欧洲标准测试方法的设备。这些测试方法为:• 单一火源测试EN ISO 119252,建筑制品对火反应试验-建筑制品在直接火焰冲击下的可燃性。• 氧弹式量热仪EN ISO 1716,建筑制品对火反应试验-燃烧热值的测定。• 不燃性试验装置EN ISO 1182,建筑制品对火反应试验-不燃性试验。...
水平或垂直燃烧试验方法测定塑料表面火焰传播性能,其原理系水平或垂直地夹住试样的一端,对试样自由端施加规定的点燃源,测定线性燃烧速率(水平法)或有焰燃烧及无焰燃烧时间(垂直法)等来评价试样的阻燃性能。...
获得的试验结果取决于试样的形状、方向和试样周围环境以及引燃条件,主要特点是将试样水平或垂直放置,试样的放置可以区分材料可燃性的程度。试验方法A,水平燃烧HB、,试样处于水平位置,适用于评价燃烧范围和(或)火焰传播速率,如线性燃烧速率,试验方法B,垂直燃烧V,试样处于垂直位置,适用于评价试验火焰移去后燃烧程度,水平燃烧(HB、方法和垂直燃烧(V、方法所获得的结果不等效。...
GB8746-88规定了纺织织物燃烧性能垂直向试样易点燃性的测定,该法用规定点火器产生的规定火焰,对垂直向纺织试样点火,测量织物点燃所需要的时间。GB8745-88规定了纺织织物表面燃烧性能的测定,在规定的试验条件下,在接近项部处点燃支承于垂直板上的干燥试样的起毛表面,测定火焰在织物表面向下蔓延至标记线的时间。...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号