ISO 4264-2007
石油产品.四变量公式法计算中间馏分燃料的十六烷指数
Petroleum products - Calculation of cetane index of middle-distillate fuels by the four-variable equation
ISO 4264-2007 发布历史
This International Standard describes a procedure for the calculation of the cetane index of middle-distillate fuels from petroleum-derived sources. The calculated value is termed the “cetane index by four-variable equation”. Throughout the remaining text of this International Standard, the term “cetane index” implies cetane index by four-variable equation. This International Standard is not applicable to fuels containing additives for raising the cetane number, nor to pure hydrocarbons, nor to distillate fuels derived from coal. It is applicable to fuels containing non-petroleum derivatives from tar sand and oil shale. NOTE 1 This International Standard was originally developed using a matrix of fuels, some of which contain nonpetroleum derivates from tar sands and oil shale. Other cetane index equations have since been developed which can be more applicable to tar sands products. NOTE 2 The cetane index is not an alternative way to express the cetane number; it is a supplementary tool, to be used with due regard for its limitations. NOTE 3 The cetane index is used to estimate the cetane number of diesel fuel when a test engine is not available to determine this property directly, or when insufficient sample is available for an engine rating. In cases where the cetane number of a fuel has been previously established, the cetane index can be used to verify the cetane number of subsequent samples of that fuel, provided the fuel's source and mode of manufacture remain unchanged. The recommended range of fuel properties for application of this International Standard is as follows: Fuel property Recommended range Cetane number 32,5 – 56,5 Density at 15 °C, kg/m3 805,0 – 895,0 10 % (V/V) distillation recovery temperature, °C 171 – 259 50 % (V/V) distillation recovery temperature, °C 212 – 308 90 % (V/V) distillation recovery temperature, °C 251 – 363 Within the recommended range of cetane number (32,5 to 56,5), the expected error of the prediction via the cetane index equation will be less than ± 2 cetane numbers for 65 % of the distillate fuels examined. Errors may be greater for fuels whose properties fall outside the recommended range of application.
ISO 4264-2007由国际标准化组织 IX-ISO 发布于 2007-08。
ISO 4264-2007 在中国标准分类中归属于: E30 石油产品综合，在国际标准分类中归属于: 75.160.20 液体燃料。
ISO 4264-2007的历代版本如下：
- 1995年10月 ISO 4264-1995 石油产品 用四变量方程式计算中间馏份燃料十六烷指数
- 2007年08月 ISO 4264-2007 石油产品.四变量公式法计算中间馏分燃料的十六烷指数
- 2013年04月17日 ISO 4264-2007/Amd 1-2013 石油产品.用四变量方程计算中间馏分燃料的十六烷指数.修改件1
- 2018年06月 ISO 4264-2018 石油产品.四变量公式法计算中间馏分燃料的十六烷指数
- 标准号
- ISO 4264-2007
- 发布日期
- 2007年08月
- 实施日期
- 废止日期
- 无
- 中国标准分类号
- E30
- 国际标准分类号
- 75.160.20
- 发布单位
- 国际标准化组织
- 代替标准
- ISO 4264-2018
- 被代替标准
- ISO 4264-1995 ISO/FDIS 4264-2007
- 适用范围
- This International Standard describes a procedure for the calculation of the cetane index of middle-distillate fuels from petroleum-derived sources. The calculated value is termed the “cetane index by four-variable equation”. Throughout the remaining text of this International Standard, the term “cetane index” implies cetane index by four-variable equation. This International Standard is not applicable to fuels containing additives for raising the cetane number, nor to pure hydrocarbons, nor to distillate fuels derived from coal. It is applicable to fuels containing non-petroleum derivatives from tar sand and oil shale. NOTE 1 This International Standard was originally developed using a matrix of fuels, some of which contain nonpetroleum derivates from tar sands and oil shale. Other cetane index equations have since been developed which can be more applicable to tar sands products. NOTE 2 The cetane index is not an alternative way to express the cetane number; it is a supplementary tool, to be used with due regard for its limitations. NOTE 3 The cetane index is used to estimate the cetane number of diesel fuel when a test engine is not available to determine this property directly, or when insufficient sample is available for an engine rating. In cases where the cetane number of a fuel has been previously established, the cetane index can be used to verify the cetane number of subsequent samples of that fuel, provided the fuel's source and mode of manufacture remain unchanged. The recommended range of fuel properties for application of this International Standard is as follows: Fuel property Recommended range Cetane number 32,5 – 56,5 Density at 15 °C, kg/m3 805,0 – 895,0 10 % (V/V) distillation recovery temperature, °C 171 – 259 50 % (V/V) distillation recovery temperature, °C 212 – 308 90 % (V/V) distillation recovery temperature, °C 251 – 363 Within the recommended range of cetane number (32,5 to 56,5), the expected error of the prediction via the cetane index equation will be less than ± 2 cetane numbers for 65 % of the distillate fuels examined. Errors may be greater for fuels whose properties fall outside the recommended range of application.