IEC 62271-205-2008
高压开关装置和控制装置.第205部分:额定电压52kV以上用紧凑开关控制组件

High-voltage switchgear and controlgear - Part 205: Compact switchgear assemblies for rated voltages above 52 kV

IEC 62271-205-2008 发布历史

This part of IEC 62271 applies to compact switchgear assemblies consisting of at least one switching device directly connected to, or sharing components with, one or more other devices such that there is an interaction between the functions of the individual devices. Such assemblies are made up of devices defined in 1.101 and are designed, tested and supplied for use as a single unit. The interaction between devices may be due to proximity, sharing of components or a combination of both. The assemblies may contain components of air insulated switchgear (AIS) only or a combination of AIS and gas insulated switchgear (GIS), so called mixed technology switchgear (MTS) and may be delivered entirely prefabricated or partially assembled. It is not possible to define all potential arrangements of compact switchgear assemblies however four examples are shown for information in Annex A. These compact switchgear assemblies are for indoor and/or outdoor installations in systems having rated voltages above 52 kV and service frequencies of 50 Hz and 60 Hz. This standard covers the influence on performance of the interactions between devices within compact switchgear assemblies and defines ratings and test procedures for these assemblies. IEC 62271-1 is applicable if not stated otherwise. This standard does not apply to switchgear assemblies consisting solely of GIS which are covered by 62271-203.

IEC 62271-205-2008由国际电工委员会 IX-IEC 发布于 2008-01。

IEC 62271-205-2008 在中国标准分类中归属于: K43 高压开关设备，在国际标准分类中归属于: 29.130.10 高压开关装置和控制器,29.130.99 其他开关装置和控制器。

IEC 62271-205-2008 发布之时，引用了标准

• IEC 60044-1 互感器 第1部分:电流互感器
• IEC 60044-2 仪表用变压器.第2部分:感应电压变压器
• IEC 60044-3 仪表用互感器.第3部分:组合式互感器
• IEC 60044-5 互感器.第5部分:电容电压互感器
• IEC 60044-7 互感器 第7部分:电子电压互感器
• IEC 60044-8 互感器.第8部分:电子电流互感器
• IEC 60099-4 避雷器.第4部分:交流电系统用无间隙金属氧化物避雷器*， 2014-06-01 更新
• IEC 60137 交流电压1000V以上的绝缘套管*， 2017-06-01 更新
• IEC 60265-2 高压开关 第2部分:额定电压52kV及以上的高压开关
• IEC 61462 复合空心绝缘子.使用在额定电压大于1000伏的电气设备用受压和未受压绝缘子.定义、试验方法、验收标准和设计建议
• IEC 61936-1 IEC 61936-1-2021
• IEC 62155 额定电压为1000V以上的电气设备用空心增压和未增压陶瓷和玻璃绝缘子
• IEC 62271-1 IEC 62271-1-2021

* 在 IEC 62271-205-2008 发布之后有更新，请注意新发布标准的变化。

IEC 62271-205-2008的历代版本如下：

• 2008年01月 IEC 62271-205-2008 高压开关装置和控制装置.第205部分:额定电压52kV以上用紧凑开关控制组件

标准号

IEC 62271-205-2008

发布日期

2008年01月

实施日期

废止日期

无

中国标准分类号

K43

国际标准分类号

29.130.10;29.130.99

发布单位

IX-IEC

引用标准

IEC 60044-1 IEC 60044-2 IEC 60044-3 IEC 60044-5 IEC 60044-7 IEC 60044-8 IEC 60050-441 IEC 60099-4 IEC 60137 IEC 60265-2 IEC 62271-209 IEC 61462 IEC/TR 61639 IEC 61936-1 IEC 62155 IEC 62271-1 IEC 62271-100 IEC 62271-102 IEC 62271-108 IEC 62271-203

被代替标准

IEC 17C/418/FDIS-2007

适用范围

This part of IEC 62271 applies to compact switchgear assemblies consisting of at least one switching device directly connected to, or sharing components with, one or more other devices such that there is an interaction between the functions of the individual devices. Such assemblies are made up of devices defined in 1.101 and are designed, tested and supplied for use as a single unit. The interaction between devices may be due to proximity, sharing of components or a combination of both. The assemblies may contain components of air insulated switchgear (AIS) only or a combination of AIS and gas insulated switchgear (GIS), so called mixed technology switchgear (MTS) and may be delivered entirely prefabricated or partially assembled. It is not possible to define all potential arrangements of compact switchgear assemblies however four examples are shown for information in Annex A. These compact switchgear assemblies are for indoor and/or outdoor installations in systems having rated voltages above 52 kV and service frequencies of 50 Hz and 60 Hz. This standard covers the influence on performance of the interactions between devices within compact switchgear assemblies and defines ratings and test procedures for these assemblies. IEC 62271-1 is applicable if not stated otherwise. This standard does not apply to switchgear assemblies consisting solely of GIS which are covered by 62271-203.

IEC 62271-205-2008系列标准

谁引用了IEC 62271-205-2008 更多引用